Restricted accessResearch articleFirst published online 2014-7
Effect of extrusion conditions and post-extrusion techniques on the morphology and thermal/mechanical properties of polycaprolactone/clay nanocomposites
The effect of extrusion conditions on the performance of polycaprolactone /organo-modified clay nanocomposites was studied. It was demonstrated that the extrusion parameters have negligible effect on the molecular weight of polycaprolactone, on the morphology of the nanocomposites and on the final thermal/mechanical properties of the materials. This result was a consequence of the previous optimization of both polymer/clay compatibility and clay processing stability. Finally, the molten–polycaprolactone/clay mixtures were post-processed by different techniques submitting the mixtures to extensional flow. Clay platelets alignment was observed as a function of the extensional flow intensity which further improved the mechanical properties of the nanocomposites.
LepoittevinBDevalckenaereMPantoustierN. Poly(ɛ-caprolactone)/clay nanocomposites prepared by melt intercalation: mechanical, thermal and rheological properties. Polymer2002; 43: 4017–4023.
2.
KuniokaMNinomiyaFFunabashiM. Novel evaluation method of biodegradabilities for oil-based polycaprolactone by naturally occurring radiocarbon-14 concentration using accelerator mass spectrometry based on ISO 14855-2 in controlled compost. Polym Degrad Stab2007; 92: 1279–1288.
3.
LudueñaLNAlvarezVAVazquezA. Processing and microstructure of PCL/clay nanocomposites. Mater Sci Eng A2007; 460–461: 121–129.
4.
DuboisPJacobsCJeromeR. Macromolecular engineering of polylactones and polylactides. 4. Mechanism and kinetics of lactide homopolymerization by aluminum isopropoxide. Macromolecules1991; 24: 2266–2270.
5.
MessersmithPBGiannelisEP. Synthesis and barrier properties of poly(ɛ-caprolactone)-layered silicate nanocomposites. J Polym Sci Part A: Polym Chem1995; 33: 1047–1057.
6.
KojimaYUsukiAKawasumiM. Mechanical properties of nylon 6-clay hybrid. J Mater Res1993; 8: 1185–1189.
7.
GilmanJWJacksonCLMorganAB. Flammability Properties of Polymer–Layered-Silicate Nanocomposites. Polypropylene and Polystyrene Nanocomposites. Chem Mater2000; 12: 1866–1873.
8.
GorrasiGTortoraMVittoriaV. Vapor barrier properties of polycaprolactone montmorillonite nanocomposites: effect of clay dispersion. Polymer2003; 44: 2271–2279.
9.
RanadeANayakKFairbrotherD. Maleated and non-maleated polyethylene–montmorillonite layered silicate blown films: creep, dispersion and crystallinity. Polymer2005; 46: 7323–7333.
10.
FischerH. Polymer nanocomposites: from fundamental research to specific applications. Mater Sci Eng C2003; 23: 763–772.
11.
LudueñaLNKennyJMVázquezA. Effect of clay organic modifier on the final performance of PCL/clay nanocomposites. Mater Sci Eng A2011; 529: 215–223.
12.
JanigováILednickýFMoškováDJ. Nanocomposites with Biodegradable Polycaprolactone Matrix. Macromol Symp2011; 301: 1–8.
13.
DiYIannaceSDi MaioE. Nanocomposites by melt intercalation based on polycaprolactone and organoclay. J Polym Sci Part B: Polym Phys2003; 41: 670–678.
14.
HommingaDGoderisBDolbnyaI. Crystallization behavior of polymer/montmorillonite nanocomposites. Part II. Intercalated poly(ɛ-caprolactone)/montmorillonite nanocomposites. Polymer2006; 47: 1620–1629.
15.
HommingaDGoderisBHoffmanS. Influence of shear flow on the preparation of polymer layered silicate nanocomposites. Polymer2005; 46: 9941–9954.
16.
LepoittevinBPantoustierNDevalckenaereM. Polymer/layered silicate nanocomposites by combined intercalative polymerization and melt intercalation: a masterbatch process. Polymer2003; 44: 2033–2040.
17.
VanderHartDLAsanoAGilmanJW. NMR Measurements Related to Clay-Dispersion Quality and Organic-Modifier Stability in Nylon-6/Clay Nanocomposites. Macromolecules2001; 34: 3819–3822.
18.
VanderHartDLAsanoAGilmanJW. Solid-State NMR Investigation of Paramagnetic Nylon-6 Clay Nanocomposites. 2. Measurement of Clay Dispersion, Crystal Stratification, and Stability of Organic Modifiers. Chem Mater2001; 13: 3796–3809.
19.
AlexandreMDuboisP. Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng R: Rep2000; 28: 1–63.
VaiaRAGiannelisEP. Lattice Model of Polymer Melt Intercalation in Organically-Modified Layered Silicates. Macromolecules1997; 30: 7990–7999.
23.
WeonJISueHJ. Effects of clay orientation and aspect ratio on mechanical behavior of nylon-6 nanocomposite. Polymer2005; 46: 6325–6334.
24.
TadmorZGogosC. Principles in polymer processing, 2 ed. Hoboken, New Jersey: Wiley, 2006.
25.
Ludueña LN, Vázquez A and Alvarez VA. Effect of the type of clay organo-modifier on the morphology, thermal/mechanical/impact/barrier properties and biodegradation in soil of polycaprolactone/clay nanocomposites. J Appl Polym Sci 2013; 128: 2648–2657.
26.
YamWYIsmailJKammerHW. Polymer blends of poly(ɛ-caprolactone) and poly(vinyl methyl ether) – thermal properties and morphology. Polymer1999; 40: 5545–5552.
27.
WagenerRReisingerTJG. A rheological method to compare the degree of exfoliation of nanocomposites. Polymer2003; 44: 7513–7518.
ZhaoJMorganABHarrisJD. Rheological characterization of polystyrene–clay nanocomposites to compare the degree of exfoliation and dispersion. Polymer2005; 46: 8641–8660.
DurmusAKasgozAMacoskoCW. Linear low density polyethylene (LLDPE)/clay nanocomposites. Part I: Structural characterization and quantifying clay dispersion by melt rheology. Polymer2007; 48: 4492–4502.
32.
BairdDGColliasDIMolding and forming. In: SonsJWa (ed.). Polymer processing: principles and design, Toronto: Wiley Interscience, 1998, pp. 346–346.
