The main objective of this article was to study the capillary effects during the impregnation of polypropylene resin in the jute fiber mats. The static equilibrium contact angles between polypropylene matrix and fibers were measured and the dynamic impregnation of matrix in the fiber mats was researched in detail. The results show that the static contact angles are clam-shell shape. The capillary effects present little values in the dynamic impregnation. The preparation for low void composites should be performed below the critical resin flow velocity of 0.13 µm/s for polypropylene resin and 0.21 µm/s for polypropylene/maleated polypropylene blend resin, respectively.
SeverKSarikanatMSekiY. Surface treatments of jute fabric: the influence of surface characteristics on jute fabrics and mechanical properties of jute/polyester composites. Ind Crops Prod2012; 35: 22–30.
2.
AlvesCDiasAPSDiogoAC. Eco-composite: the effects of the jute fiber treatments on the mechanical and environmental performance of the composite materials. J Compos Mater2011; 45: 573–589.
3.
FrancucciGRodríguezESVázquezA. Experimental study of the compaction response of jute fabrics in liquid composite molding processes. J Compos Mater2012; 46: 155–167.
4.
WuSH. Polymer interface and adhesion, New York: Marcel Dekker, 1982, pp. 360–370.
5.
AhnKJSeferisJCBergJC. Simultaneous measurements of permeability and capillary pressure of thermosetting matrices in woven fabic reinforcements. Polym Compos1991; 12: 146–152.
6.
LawrenceJMNeacsuVAdvaniSG. Modeling the impact of capillary pressure and air entrapment on fiber tow saturation during resin infusion in LCM. Composites Part A2009; 40: 1053–1064.
7.
PatelNRohatgiVLeeLJ. Influence of processing and material variables on resin-fiber interface in liquid composite molding. Polym Compos1993; 14: 161–172.
8.
PatelNLeeLJ. Modeling of void formation and removal in liquid composite molding. Part І: wettability analysis. Polym Compos1996; 17: 96–103.
9.
VerreyJMichaudVMånsonJ-AE. Dynamic capillary effects in liquid composite moulding with non-crimp fabrics. Composites Part A2006; 37: 92–102.
10.
FrancucciGVázquezARuizE. Capillary effects in vacuum-assisted resin transfer molding with natural fibers. Polym Compos2012; 33: 1593–1602.
11.
RuizEAchimVSoukaneS. Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites. Compos Sci Technol2006; 66: 475–486.
12.
ElmendorpJJSchoolenbergGESome wetting and adhesion phenomena in polypropylene composites. In: Karger-KocsisJ (ed). Polypropylene: structure, blends and composites, London: Chapman and Hall, 1995, pp. 228–228.
13.
ConnorMTollSMånsonJ-AE. A model for the consolidation of aligned thermoplastic powder impregnated composites. J Thermoplast Compos Mater1995; 8: 138–162.
14.
NygårdPGrundkeKMäderE. Wetting kinetics and adhesion strength between polypropylene melt and glass fibre: influence of chemical reactivity and fibre roughness. J Adhes Sci Technol2002; 16: 1781–1808.
15.
SauerBDipaoloN. Surface tension and dynamic wetting of polymers using the Wihelmy method: applications to high molecular weights and elevated temperatures. J Colloid Interface Sci1991; 144: 527–537.
16.
FuentesCATranLQNDupont-GillainC. Wetting behaviour and surface properties of technical bamboo fibers. Colloid Surf A2011; 380: 89–99.
17.
Liu XY. Approach to high performance of jute fiber mat reinforced polypropylene and its manufacturing technology. Doctor Thesis, East China University of Science and Technology, 2007.
18.
LiMHuangJDaiGC. Melt flow through glass fiber mat during GMT melt impregnation. Acta Mater Compos Sin2000; 17: 28–32.
19.
ConnorMHardingPHMansonJ-AE. Influence of the fiber surface properties on the mechanical strength of unidirectional fiber composites. J Adhes Sci Technol1995; 9: 983–1004.
20.
LiMWangSKGuYZ. Dynamic capillary impact on longitudinal micro-flow in vacuum assisted impregnation and the unsaturated permeability of inner fiber tows. Compos Sci Technol2010; 70: 1628–1636.
