Modelling the effect of yarn twist on the tensile strength of unidirectional plant fibre yarn composites

Abstract

The structural potential of plant fibres as reinforcing agents can only be realized when the highest reinforcement efficiency is employed. Hence, aligned plant fibre composites are of interest. However, due to the short length of technical plant fibres, the reinforcement needs to be in the form of staple fibre yarns, which have a twisted structure. Although twist facilitates yarn processability, it has several detrimental effects on the composites produced from such twisted yarn reinforcements; one of which is fibre obliquity and misalignment. This results in a drastic drop in composite mechanical properties. No analytical model currently exists to accurately predict the effect of yarn twist on aligned plant fibre composite tensile strength. In this paper, a novel mathematical model is developed. The model is based on (i) a modified rule of mixtures for plant fibre composites, (ii) well-defined structure-property relationships in an idealised twisted staple fibre yarn and (iii) the Krenchel orientation efficiency factor. The developed model includes a corrected orientation efficiency factor of cos²(2α), where α is the yarn surface twist angle. The model is validated with extensive experimental data from Goutianos and Peijs (Goutianos S, Peijs T (2003) Adv Compos Lett 12(6):237) and is found to be a near-perfect fit (R² = 0.960). Experimental data from other studies are also used for further verification.

Keywords

Natural fibres polymer-matrix composites twisted yarn modelling reinforcement orientation efficiency tensile strength

Get full access to this article

View all access options for this article.

References

Wambua

Ivens

Verpoest

. Natural fibres: can they replace glass in fibre reinforced plastics? Compos Sci Technol 2003; 63: 1259–1264.

Bledzki

Faruk

Sperber

. Cars from bio-fibres. Macromol Mater Eng 2006; 291: 449–457.

Karus

Karup

. Natural fibres in the european automotive industry. J Ind Hemp 2002; 7: 119–131.

Shah DU, Schubel PJ, Clifford MJ, et al. Mechanical characterization of vacuum infused thermoset matrix composites reinforced with aligned hydroxyethylcellulose sized plant bast fibre yarns. In: 4th International Conference on Sustainable Materials, Polymers and Composites. Birmingham, UK, 6–7 July 2011.

Goutianos

. Development of flax fibre based textile reinforcements for composite applications. Appl Compos Mater 2006; 13: 199–215.

Madsen

Hoffmeyer

Lilholt

. Hemp yarn reinforced composites – II. Tensile properties. Compos Appl Sci Manuf 2007; 38: 2204–2215.

Goutianos

Peijs

. The optimisation of flax fibre yarns for the development of high-performance natural fibre composites. Adv Compos Lett 2003; 12: 237–241.

Weyenberg

Chitruong

Vangrimde

. Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment. Compos Appl Sci Manuf 2006; 37: 1368–1376.

Zhang

Miao

. Commingled natural fibre/polypropylene wrap spun yarns for structured thermoplastic composites. Compos Sci Technol 2010; 70: 130–135.

10.

Khondker

. Fabrication and mechanical properties of unidirectional jute/PP composites using jute yarns by film stacking method. J Polym Environ 2005; 13: 115–126.

11.

Baets

Plastria

Ivens

. Determination of the optimal flax fibre preparation for use in UD-epoxy composites. 4th International Conference on Sustainable Materials, Polymers and Composites. Birmingham, UK. 6–7 July 2011.

12.

Shah

Schubel

Clifford

. Yarn optimisation and plant fibre surface treatment using hydroxyethylcellulose for the development of structural bio-based composites. 18th International Conference on Composite Materials (ICCM-18). Jeju, South Korea, 2011.

13.

Dissanayake

NPJ

. Life cycle impact assessment of flax fibre for the reinforcement of composites. J Biobased Mater Bioenergy 2009; 3: 1–4.

14.

Lewin M. Handbook of fiber chemistry, 3rd edn. Boca Raton, USA: Taylor & Francis Group LLC, 2007.

15.

Finn

Miao

. Low cost composite preforms from natural fibres. Composites Australia 2008: Conference & Exhibition. 13–14 March 2008. Melbourne, Australia.

16.

Arnold

. Next generation sustainable composites: development and processing of furan-flax biocomposites. 17th International Conference on Composite Materials. Edinburgh, UK, 27–31 July 2009.

17.

Shah DU, Schubel PJ, Licence P, et al. Hydroxyethylcellulose surface treatment of natural fibres: the new ‘twist’ in yarn preparation and optimization for composites applicability. J Mater Sci 2012; 47: 2700–2711.

18.

Ma H, Li Y and Luo Y. The effect of fiber twist on the mechanical properties natural fiber reinforced composites. In: 18th International Conference on Composite Materials. Jeju, South Korea, 2011.

19.

Rao

Farris

. A modeling and experimental study of the influence of twist on the mechanical properties of high-performance fiber yarns. J Appl Polymer Sci 2000; 77: 1938–1949.

20.

Naik

Madhavan

. Twisted impregnated yarns: elastic properties. J Strain Anal 2000; 35: 83–91.

21.

Shioya

. Variation of longitudinal modulus with twist for yarns composed of high modulus fibers. Textil Res J 2001; 71: 928–936.

22.

Baets J, Plastria D, Ivens J, et al. Determination of the optimal flax fibre preparation for use in UD-epoxy composites. In: 18th International Conference on Composite Materials (ICCM-18), Jeju, South Korea, 2011.

23.

Rask M and Madsen B. Twisting of fibres in yarns for natural fibre composites. In: 18th International Conference on Composite Materials (ICCM-18), Jeju, South Korea, 2011.

24.

Gegauff

. Force et elasticite des files en cotton. Bulletin De La Societe Industrielle De Mulhouse 1907; 77: 153–153.

25.

Platt

. Mechanics of elastic performance of textile materials, Part III: some aspects of stress analysis of textile structures - continuous filament yarns. Textil Res J 1950; 20: 1–1.

26.

Hearle

JWS

Grosberg

Backer

. Structural mechanics of yarns and fabrics, Vol 1, New York: Wiley-Interscience, 1969, pp. 180–180.

27.

Pan

. Development of a constitutive theory for short fiber yarns: mechanics of staple yarn without slippage effect. Textil Res J 1992; 62: 749–765.

28.

Yilmaz

Göktepe

. Packing density of compact yarns. Textil Res J 2007; 77: 661–667.

29.

Azzi

Tsai

. Anisotropic strength of composites. Exper Mech 1965; 5: 283–288.

30.

Shah DU, Schubel PJ, Licence P, et al. The role of (mis)orientation on the tensile properties of plant fibres and their composites. University of Nottingham: Nottingham, 2012.

31.

Madsen

Hoffmeyer

Thomsen

. Hemp yarn reinforced composites – I. Yarn characteristics. Compos Appl Sci Manuf 2007; 38: 2194–2203.

32.

Summerscales

. A review of bast fibres and their composites. Part 2 - Composites. Compos Appl Sci Manuf 2010; 41: 1336–1344.

33.

Krenchel H. Fibre reinforcement. Copenhagen, Denmark: Akademisk Forlag, 1964: pp. 16–22.

34.

Pan

. Development of a constitutive theory for short fiber yarns: Part III: effects of fiber orientation and bending deformation. Textil Res J 1993; 63: 565–572.

35.

McLaughlin

Tait

. Fracture mechanism of plant fibres. J Mater Sci 1980; 15: 89–95.