The aim of this work is to characterize the compaction behavior of jute woven fabric preforms. The maximum compaction pressure, permanent deformation, and stress relaxation of the preforms were found to be dependent on the final fiber volume fraction and the compaction speed. Higher compaction speeds led to higher compaction pressures, stress relaxation, and permanent deformation. On the other hand, as the fiber content was raised, the maximum compaction pressure and the permanent deformation increased, while the stress relaxation decreased. In addition, it was found that the structure of natural fibers affected the compaction behavior of the preforms. Each fiber is composed of several hollow elementary fibers, which collapsed due to the compressive loading. Furthermore it was found that fluid absorption reduced the compaction pressure in natural fiber preforms due to fiber softening.
RowellRSanadiARCaulfieldDFJacobsonRE. Utilization of natural fibers in plastic composites: Problems and opportunities. In: LeaoALCarvalhoFXFrolliniE. (eds) Lignocellulosic-plastic composites. San Pablo: USP and UNESP, 1997, 23–51.
2.
FrancucciGRodríguezESVázquezA. Study of saturated and unsaturated permeability in natural fiber fabrics. Composites Part A2010; 41: 16–21.
3.
BreardJHenzelYTrochuFGauvinR. Analysis of dynamic flows through porous media. Part I: Comparison between saturated and unsaturated flows in fibrous reinforcements. Polym Composite2003; 24: 391–408.
4.
DunganFDSastryAM. Saturated and unsaturated polymer flows: Microphenomena and modeling. J Compos Mater2002; 36: 1581–1603.
5.
WolfrathJMichaudVModaressiAMansonJ-AE. Unsaturated flow in compressible fibre preforms. Composites Part A2006; 37: 881–889.
6.
ParnasRSSalemAJSadiqTAKWangHPAdvaniSG. The interaction between micro- and macro-scopic flow in RTM preforms. Compos Struct1994; 27: 93–107.
7.
LuceTLAdvaniSGHowardJGParnasRS. Permeability characterization. Part 2: Flow behavior in multiple-layer preforms. Polym Composite1995; 15: 446–458.
8.
LuoYVerpoestIHoesKVanheuleMSolHCardonA. Permeability measurement of textile reinforcements with several tests fluids. Composites Part A2001; 32: 1497–1504.
9.
PillaiKMAdvaniSG. A model for unsaturated flow in woven fiber preforms during mold filling in resin transfer molding. J Compos Mater1998; 32: 1753–1783.
10.
VerreyJMichaudVMansonJ-AE. Dynamic capillary effects in liquid composite moulding with non-crimp fabrics. Composites Part A2006; 37: 92–102.
11.
AmicoSCLekakouC. Axial impregnation of a fiber bundle. Part 1: Capillary experiments. Polym Composite2002; 23: 249–263.
12.
AmicoSCLekakouC. Mathematical modeling of capillary micro-flow through woven fabrics. Composites Part A2000; 31: 1331–1344.
13.
KellyPAUmerRBickertonS. Viscoelastic response of dry and wet fibrous materials during infusion processes. Composites Part A2006; 37: 868–873.
14.
SomashekarAABickertonSBhattacharyyaD. An experimental investigation of non-elastic deformation of fibrous reinforcements in composites manufacturing. Composites Part A2006; 37: 858–867.
15.
ChenBLangEJChouT-W. Experimental and theoretical studies of fabric compaction behavior in resin transfer molding. Mater Sci Eng A-Struct2001; 317: 188–196.
16.
BreardJHenzelYTrochuFGauvinR. Analysis of dynamic flows through porous media. Part II: Deformation of a double-scale fibrous reinforcement. Polym Composite2003; 24: 409–420.
17.
RobitailleFGauvinR. Compaction of textile reinforcements for composite manufacturing III. Reorganization of the fiber network. Polym Composite1999; 20: 48–61.
18.
UmerRBickertonSFernyhoughA. Characterizing wood fibre mats as reinforcements for liquid composite molding processes. Composites Part A2007; 38: 434–448.
19.
YenilmezBSenanMSozerEM. Variation of part thickness and compaction pressure in vacuum infusion process. Compos Sci Technol2009; 69: 1710–1719.
20.
Madsen B, Lilholt H. Compaction of plant fibre assemblies in relation to composite fabrication. Sustainable natural and polymeric composites - sciences and technology. In Proceedings of the 23rd Riso International Symposium on Materials Science, 2–5 September, Roskilde, Denmark, 2002, No 23, pp. 239–250.
21.
Madsen B. Properties of plant fibre yarn polymer composites – an experimental study, Report. BYGċDTU. R-082, Technical University of Denmark, 2004.
22.
LundquistLWilliFLeterrierYMansonJ-AE. Compression behavior of pulp fiber networks. Polym Eng Sci2004; 44: 45–55.
23.
Nishino-KobeT. (2004) Natural fibre sources. In: BaillieC (ed.) Green composites - Polymer composites and the environment. Abington Cambridge: Woodhead, 2004, 49–81.
24.
KellyPAUmerRBickertonS. Viscoelastic response of dry and wet fibrous materials during infusion processes. Composites Part A2006; 37: 868–873.
25.
BickertonSAbdullahMZ. Modeling and evaluation of the filling stage of injection/compression moulding. Compos Sci Technol2003; 63: 1359–1375.
26.
SmithWF. Principles of material science and engineering, 4th ed.New York: Mc Graw-Hill, 1990, 743–751.
