A finite element method is presented for predicting the mechanical performance of discontinuous fiber mesostructures typically produced by directed carbon fiber preforming. High-filament count bundles are modeled using beam elements to enable large representative volume elements to be studied. The beams are attached to a regular grid of 2D continuum elements, which represent the matrix material, using an embedded element technique. The model is validated by comparing simulations with experimental data for random and aligned fiber architectures produced with different tow sizes (6 and 24 K) and fiber lengths (28, 58, and 115 mm). Stiffness and strength predictions are generally within 10% for 6 K preforms, but this error increases up to 40% with increasing tow size because of the assumption that the fiber bundles are circular in cross-section.
Harper, L.T., Turner, T.A., Warrior, N.A. and Rudd, C.D. ( 2005). Automated Preform Manufacture for Affordable Lightweight Body Structures, In: 26th International SAMPE Europe Conference, Paris.
2.
Harper, L.T., Turner, T.A., Warrior, N.A. and Rudd, C.D. ( 2006). Low Cost Carbon Fibre-based Automotive Body Panel Systems , In: 27th International SAMPE Europe Conference , Paris.
3.
Harper, L.T. , Turner, T.A., Warrior, N.A., Dahl, J.S. and Rudd, C.D. (2006). Characterisation of Random Carbon Fibre Composites from a Directed Fibre Preforming Process: Analysis of Microstructural Parameters, Composites Part A: Applied Science and Manufacturing, 37(11): 2136-2147.
4.
Chavka, N.G., Dahl, J.S. and Kleven, E.D. ( 2001). F3P Fiber Preforming for the Aston Martin Vanquish. In: SAMPE Europe International Conference, Paris.
5.
Harper, L.T. , Turner, T.A., Warrior, N.A. and Rudd, C.D. (2006). Characterisation of Random Carbon Fibre Composites from a Directed Fibre Preforming Process: Effect of Fibre Length, Composites Part A: Applied Science and Manufacturing , 37(11): 1863-1878.
6.
Turner, T.A., Harper, L.T., Warrior, N.A. and Rudd, C.D. ( 2008). Low Cost Carbon-fibre Based Automotive Body Panel Systems - A Performance and Manufacturing Cost Comparison, Journal of Automobile Engineering - Proceedings of the Institution of Mechanical Engineers Part D, 222(1): 53-64.
7.
Harper, L.T., Turner, T.A., Martin, J.R.B. and Warrior, N.A. ( 2008). Fiber Alignment in Directed Carbon Fiber Preforms - A Feasibility Study, Journal of Composite Materials, 43(1): 57-74.
8.
Harper, L.T., Turner, T.A., Warrior, N.A. and Rudd, C.D. ( 2007). Characterisation of Random Carbon Fibre Composites from a Directed Fibre Preforming Process: The Effect of Tow Filamentisation, Composites: Part A: Applied Science and Manufacturing, 38(3): 755-770.
9.
Christensen, R.M. and Waals, F.M. (1972). Effective Stiffness of Randomly Oriented Fibre Composites, Journal of Composite Materials, 6: 518-532.
10.
Pan, N. ( 1996). The Elastic Constants of Randomly Oriented Fiber Composites: A New Approach to Prediction, Science and Engineering of Composite Materials, 5(2): 63-72.
11.
Halpin, J.C. and Pagano, N.J. ( 1969). The Laminate Approximation for Randomly Oriented Fibre Composites, Journal of Composite Materials, 3: 720-724.
12.
Eduljee, R.F. , McCullough, R.L. and Gillespie , J.W. (1994). The Influence of Aggregated and Dispersed Textures on the Elastic Properties of Discontinuous-fiber Composites, Composites Science and Technology, 50: 381-391.
13.
Hancock, P. and Cuthbertson, R.C. (1974). Effect of Fibre Length and Interfacial Bond in Glass Fibre-Epoxy Resin Composites, Journal of Materials Science, 5: 762-768.
Fu, S.Y. and Lauke, B. (1996). Effects of Fibre Length and Fibre Orientation Distributions on the Tensile Strength of Short-Fiber-Reinforced Polymers, Composites Science and Technology, 56: 1179-1190.
16.
Kelly, A. and Tyson, W.R. ( 1965). Tensile Properties of Fibre-Reinforced Metals: Copper/ Tungsten and Copper/Molybdenum, Journal of the Mechanics and Physics of Solids, 13: 329-350.
17.
Lindhagen, J.E. and Berglund, L.A. (1997). Notch Sensitivity and Damage Mechanisms of Glass Mat Reinforced Polypropylene, Polymer Composites, 18(1): 40-47.
18.
Halpin, J.C. , Jerine, K. and Whitney, J.M. (1971). The Laminate Analogy for 2 and 3 Dimensional Composite Materials, Journal of Composite Materials, 5: 36.
19.
Halpin, J.C. and Kardos, J.L. (1978). Strength of Discontinuous Reinforced Composites: 1. Fiber Reinforced Composites, Polymer Engineering and Science, 18(6): 496-504.
20.
Hahn, H.T. ( 1975). On Approximations for Strength of Random Fiber Composites , Journal of Composite Materials, 9: 316-325.
21.
Giurgiutiu, V. and Reifsnider, K.L. (1994). Development of Strength Theories for Random Fiber Composites, Journal of Composites Technology and Research, 16(2): 103-114.
22.
Cox, H.L. (1952). The Elasticity and Strength of Paper and Other Fibrous Materials, British Journal of Applied Physics, 3: 72-79.
23.
Wetherhold, R.C. (1987). Probabilistic Aspects of the Strength of Fiber-dominated Short-fiber Composites II: Biased Fiber Distribution, Materials Science and Engineering, 91: 13-18.
24.
Wetherhold, R.C. (1987). Probabilistic Aspects of the Strength of Fiber-Dominated Short-fibre Composites I: Aligned Fibers , Materials Science and Engineering, 91: 7-12.
25.
Fukuda, H. and Chou, T.W. ( 1982). A Probabilistic Theory of the Strength of Short-fibre Composites with Variable Fibre Length and Orientation, Journal of Materials Science, 17: 1003-1011.
26.
Fukuda, H. and Chou, T.W. ( 1981). A Probabilistic Theory for the Strength of Short Fibre Composites, Journal of Materials Science, 16: 1088-1096.
27.
Torquato, S. ( 2001). Random Heterogeneous Materials - Microstructure and Macroscopic Properties, Vol 16, p. 700, Interdisciplinary Applied Mathematics , Springer.
28.
Ionita, A. and Weitsman, Y.J. ( 2006). Randomly Reinforced Composites: Properties, Failure and Aspects of Material Design, Probabilistic Engineering Mechanics , 21: 64-72.
29.
Ionita, A. and Weitsman, Y.J. ( 2006). On the Mechanical Response of Randomly Oriented Reinforced Chopped Fibre Composites: Data and Model, Composites Science and Technology, 66(14): 2566-2579.
30.
Eason, T. and Ochoa, O. ( 1996). Modeling Residual Stresses and Damage Initiation in Discontinuous Random Fiber SRIM Composites, Computer Aided Design in Composite Material Technology, 5: 123-132.
31.
Eason, T. and Ochoa, O. ( 2000). Material Behaviour of Structural Reaction Injection Molded composites under Thermomechanical Loading, Journal of Composite Materials, 34(5): 411-432.
32.
Zhao, L.G., Warrior, N.A. and Long, A.C. ( 2006). A Micromechanical Study of Residual Stress and its Effect on Transverse Failure in Polymer-Matrix Composites, International Journal of Solids and Structures, 43(18-19): 5449-5467.
33.
Weibull, W. ( 1939). A Statistical Theory of Strength of Materials, Ingeniorsvetenscapsakademien Handlingar, 151: 1-29.
