Varying amounts of three different carbons (carbon black, synthetic graphite particles, and carbon nanotubes) were added to polypropylene, and the resulting single-filler composites were tested for thermal conductivity using the nanoflash test method. In addition, the effects of single fillers and combinations of different carbon fillers were studied via a factorial design. Each single filler caused a statistically significant increase in through-plane thermal conductivity at the 95% confidence level, with synthetic graphite causing the largest increase, followed by carbon nanotubes, and then carbon black. The synthetic graphite/carbon nanotube formulations, followed by the carbon black/synthetic graphite formulations also caused a statistically significant increase in composite through-plane thermal conductivity. Composites containing 75 and 80 wt% synthetic graphite in polypropylene had an in-plane thermal conductivity of 24 and 34 W/m·K, respectively. This meets the thermal conductivity target of >20 W/m·K for fuel cell bipolar plates.
Finan, J.M. ( 1999). Thermally Conductive Thermoplastic Materials, In: Proceedings of the Society of Plastics Engineers Annual Technical Conference, 2-6 May, pp. 1547-1550.
2.
Agari, Y. and Uno, T. ( 1985). Thermal Conductivity of Polymer Filled With Carbon Materials: Effect of Conductive Particle Chains on Thermal Conductivity, Journal of Applied Polymer Science, 30: 2225-2235.
Bigg, D.M. ( 1985). Effect of Compounding on the Properties of Short Fiber Reinforced Injection Moldable Thermoplastic Composites, Polymer Composites, 6(1): 20-28.
6.
Nagata, K., Iwabuki, H. and Nigo, H. ( 1999). Effect of Particle Size of Graphites on Electrical Conductivity of Graphite/Polymer Composite, Composite Interfaces , 6(5): 483-495.
7.
Demain, A. ( 1994). Thermal Conductivity of Polymer-Chopped Carbon Fibre Composites, PhD Dissertation, Universite Catholique de Louvain, Louvain-la-Neuve, Belgium.
8.
King, J.A., Tucker, K.W., Meyers, J.D., Weber, E.H., Clingerman, M.L. and Ambrosius, K.R. ( 2001). Factorial Design Approach Applied to Electrically and Thermally Conductive Nylon 6,6, Polymer Composites, 22(1): 142-154.
9.
Murthy, M.V. ( 1994). Permanent EMI Shielding of Plastics Using Copper Fibers , In: Proceedings of the Society of Plastics Engineers Annual Technical Conference, 1-5 May, pp. 1396-1400.
Mapleston, P. (1992). Conductive Composites Get a Growth Boost from Metallic Fibers, Modern Plastics, 69: 80-83.
12.
Donnet, J.-B. , Bansal, R.C. and Wang, M.-J. (1993). Carbon Black, 2nd edn, Marcel Dekker Inc, New York.
13.
Huang, J.-C. (2002). Carbon Black Filled Conducting Polymers and Polymer Blends, Advances in Polymer Technology , 21: 299-313.
14.
Bigg, D.M. ( 1979). Mechanical, Thermal, and Electrical Properties of Metal Fiber-Filled Polymer Composites, Polymer Engineering and Science , 19(16): 1188-1192.
15.
Wilson, M.S. and Busick, D.N. (2001). Composite Bipolar Plate for Electrochemical Cells, U.S. Patent Number6, 248,467.
16.
Loutfy, R.O. and Hecht, M. (2003). Low Cost Molded Plastic Fuel Cell Separator Plate With Conductive Elements, U.S. Patent Number6,511,766.
17.
Braun, J.C. , Zabriskie, J.E. Jr. , Neutzler , J.K., Fuchs, M. and Gustafson, R.C. (2001). Fuel Cell Collector Plate and Method of Fabrication, U.S. Patent Number6,180,275.
18.
Mehta, V. and Cooper, J.S. ( 2003). Review and Analysis of PEM Fuel Cell Design and Manufacturing , Journal of Power Sources, 114: 32-53.
19.
Migri, F., Huneault, M.A. and Champagne, M.F. ( 2004). Electrically Conductive Thermoplastic Blends for Injection and Compression Molding of Bipolar Plates in the Fuel Cell Application , Polymer Engineering and Science, 44: 1755-1765.
20.
Huang, J., Baird, D.G. and McGrath, J.E. ( 2005). Development of Fuel Cell Bipolar Plates from Graphite Filled Wet-lay Thermoplastic Composite Materials, Journal of Power Sources, 150: 110-119.
21.
Wolf, H. and Willert-Porada, M. ( 2006). Electrically Conductive LCP-Carbon Composite With Low Carbon Content for Bipolar Plate Application in Polymer Electrolyte Membrane Fuel Cell, Journal of Power Sources, 153: 41-46.
22.
Robberg, K. and Trapp, V. ( 2003). Chapter 26: Graphite Based Bipolar Plates, In: Vielstick, W., Gasteiger, H.A. and Lamm, A. (eds), Handbook of Fuel Cells-Fundamentals, Technology and Applications. Vol. 3: Fuel Cell Technology and Applications , pp. 308-314, John Wiley & Sons, Ltd, New York.
23.
Hermann, A. , Chaudhur, T. and Spagnol, P. (2005). Bipolar Plates for PEM Fuel Cells: A Review, International Journal of Hydrogen Energy , 30: 1297-1302.
24.
Wang, Y. ( 2006). Conductive Thermoplastic Composite Blends for Flow Field Plates for Use in Polymer Electrolyte Membrane Fuel Cells (PEMFC), MS Thesis , University of Waterloo, Waterloo, Ontario, Canada.
25.
The Dow Chemical Company Polypropylene resin Produce Literature, Form 167-00162-0905X, Midland, MI, 48674 (2005).
26.
Akzo Nobel Electrically Conductive Ketjenblack Product Literature, 300. S. Riverside Plaza, Chicago, IL, 60606 (1999).
27.
King, J.A., Morrison, F.A., Keith, J.M., Miller, M.G., Smith, R.C., Cruz, M., Neuhalfen, A.M. and Barton, R.L. ( 2006). Electrical Conductivity and Rheology of Carbon-filled Liquid Crystal Polymer Composites, Journal of Applied Polymer Science, 101(4): 2680-2688.
Hyperion Catalysis International Fibril Product Literature , Hyperion Catalysis International, 38, Smith Place, Cambridge, MA02138(2008).
31.
Standard Test Method for Thermal Diffusivity by the Flash Method, ASTM Standard E1461-07, American Society for Testing and Materials, Philadelphia, (2008).
32.
Parker, W.J. , Jenkins, R.J., Butler, C.P. and Abbott, G.L. (1963). Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal Conductivity, Journal of Applied Physics, 32(9): 1679-1684.
33.
Cowan, R.D. (1963). Pulse Method of Measuring Thermal diffusivity at High Temperatures, Journal of Applied Physics, 34(4): 926-927.
34.
Clark, L.M. and Taylor, R.E. (1975). Radiation Loss in the Flash Method for Thermal Diffusivity, Journal of Applied Physics , 46(2): 714-719.
35.
Koski, J.A. (1981). Improved Data Reduction Methods for Laser Pulse Diffusivity Determination With the Use of Minicomputers , In: Sengers, J.V. (ed.), Proceedings of the Eighth Symposium on Thermophysical Properties, Vol. II, American Society of Mechanical Engineers, New York.
36.
Heiser, J.A. , King, J.A., Konell, J.P., Miskioglu, I. and Sutter, L.L. (2004). Tensile and Impact Properties of Carbon Filled Nylon 6,6 Based Resins, Journal of Applied Polymer Science, 91(5): 2881-2893.
37.
Konell, J.P. , King, J.A. and Miskioglu , I. (2004). Synergistic Effects of Carbon Fillers on Tensile and Impact Properties in Nylon 6,6 and Polycarbonate Based Resins, Polymer Composites , 25(2): 172-185.
38.
King, J.A., Barton, R.L., Hauser, R.A. and Keith, J.M. ( 2008). Synergistic Effects of Carbon Fillers in Electrically and Thermally Conductive Liquid Crystal Polymer Based Resins, Polymer Composites, 29: 421-428.
39.
King, J.A., Johnson, B.A., Via, M.D. and Ciarkowski, C.J. ( 2009). Electrical Conductivity of Carbon Filled Polypropylene Based Resins, Journal of Applied Polymer Science, 112: 425-433.
40.
King, J.A., Miller, M.G., Barton, R.L., Keith, J.M., Hauser, R.A., Peterson, K.R. and Sutter, L.L. ( 2006). Thermal and Electrical Conductivity of Carbon Filled Liquid Crystal Polymer Composites, Journal of Applied Polymer Science, 99: 1552-1558.
41.
Weber, E.H. , Clingerman, M.L. and King, J.A. ( 2003). Thermally Conductive Nylon 6,6 and Polycarbonate Based Resins. I. Synergistic Effects of Carbon Fillers, Journal of Applied Polymer Science, 88: 112-122.
42.
Montgomery, D.C. ( 2001). Design and Analysis of Experiments, 5th edn, John Wiley & Sons Inc, New York.
