A natural polyol was prepared from castor oil by alcoholysis with triethanolamine. The oil and the oil-based polyol were characterized by infrared spectroscopy and through the analytical determination of their functional groups, both techniques indicating that the hydroxyl content increased significantly after the alcoholysis reaction. The modified oil was subsequently used as the polyol component in the formulation of rigid polyurethane foams. Wood flour was chosen to be incorporated as filler in these materials. Physical, thermal, and mechanical properties of the neat and reinforced foams were measured, analyzed, and compared to a reference commercial system. The chemical reaction between wood flour and isocyanate strongly affected the composites’ response to thermo-gravimetric tests. Compression modulus and yield strength decreased as wood flour content increased. The effect of the foam density on the compression properties was also investigated.
Saint-Michel, F., Chazeau, L. and Cavaillé , J.-Y. (2006). Mechanical Properties of High Density Polyurethane Foams: II Effect of The Filler Size, Composites Science and Technology, 66: 2709-2718.
2.
Chian, K.S. and Gan, L.H. ( 1998). Development of a Rigid Polyurethane Foam from Palm Oil , Journal of Applied Polymer Science, 68(3): 509-515.
3.
Khot, S.N., Lascala, J.J., Can, E., Morye, S.S., Williams, G.I., Plamese, G.R., Kusefoglu, S.H. and Wool, R.P. ( 2001). Development and Application of Triglyceride-based Polymers and Composites, Journal of Applied Polymer Science, 82(3): 703-723.
4.
Tanaka, R., Hirose, S. and Hatakeyama, H. ( 2007). Preparation and Characterization of Polyurethane Foams Using a Palm Oil-based Polyol, Bioresource Technology, 99(9): 3810-3816.
5.
Hu, Y.H. , Gao, Y., Wang, D.N., Hu, C.P., Zhu, S., Vanoverloop, L. and Randall, D. (2002). Rigid Polyurethane Foam Prepared From a Rape Seed Oil-based Polyol, Journal of Applied Polymer Science, 84: 591-597.
6.
Formo, M.W., Jungermann, E., Norris, F.A. and Sonntag, N.O.V. ( 1985). In: Swern, D. (ed.), Baileys Industrial Oil and Fat Products, 4th edn, Vol. 1, pp. 453-455, Wiley, New York.
7.
Soykeabkaew, N., Supaphol, P. and Rujiravanit , R. (2004). Preparation and Characterization of Jute- and Flax-reinforced Starch-based Composite Foams, Carbohydrate Polymers, 58: 53-63.
8.
Marcovich, N.E. , Reboredo, M.M. and Aranguren , M.I. (1998). Mechanical Properties of Woodflour-unsaturated Polyester Composites, Journal of Applied Polymer Science, 70: 2121-2131.
9.
Bledzki, A.K. , Zhang, W. and Chate, A. (2001). Natural-fibre-reinforced Polyurethane Microfoams, Composites Science and Technology , 61: 2405-2411.
10.
Cotgreave, T.C. and Shortall, J.B. (1977). The Mechanism of Reinforcement of Polyurethane Foam by High-modulus Chopped Fibres, Journal of Materials Science, 12: 708-717.
11.
Barma, P., Rhodes, M.B. and Salovery, R. ( 1978). Mechanical Properties of Particulate-filled Polyurethane Foams, Journal of Applied Physics, 49: 4985-4991.
12.
Goods, S.H. , Neuschwanger, C.L., Whinnery, L.L. and Nix, W.D. (1999). Mechanical Properties of a Particle-strengthened Polyurethane Foam, Journal of Applied Polymer Science, 74: 2724-2736.
13.
Vaidya, N.Y. and Khakhar, D.V. (1997). Flexural Properties of Mica Filled Polyurethane Foams, Journal of Cellular Plastics , 33: 587-605.
14.
Siegmann, A. , Kenig, S., Alperstein, D. and Narkis, M. (1983). Mechanical Behavior of Reinforced Polyurethane Foams, Polymer Composites, 4: 113-119.
15.
Stokke, D.D. , Shaler, S.M. and Hawke, R.N. (1992). Modification of Polyurethane Foams with Cellulose Fibers, Sampe Quarterly, 23(4): 58-64.
16.
Schlöβer, T.h. and Knothe, J. (1997). Naturfaserverstarkte Fahrzeugteile, Kunststoffe, 87(9): 1148-52.
17.
Bledzki, A.K. , Gassan, J. and Zhang, W. (1999). Impact Properties of Natural Fiber-reinforced Epoxy Foams, Journal of Cellular Plastics, 35: 550-62.
18.
Bledzki, A.K. and Zhang, W. (2001). Dynamic Mechanical Properties of Natural Fiber-reinforced Epoxy Foams, Journal of Reinforced Plastics and Composites, 20(14-15): 1263-1274.
19.
Jin, J.F. , Chen, Y.L., Wang, D.N., Hu, C.P., Zhu, S., Vanoverloop, L. and Randall, D. (2002). Structures and Physical Properties of Rigid Polyurethane Foam Prepared with Rosin-based Polyol, Journal of Applied Polymer Science, 84: 598-604.
20.
John, J., Bhattacharya, M. and Turner, R.B. ( 2002). Characterization of Polyurethane Foams From Soybean Oil , Journal of Applied Polymer Science, 86: 3097-3107.
21.
Aranguren, M.I. , Rácz, I. and Marcovich, N.E. (2007). Microfoams Based on Castor Oil Polyurethanes and Vegetable Fibers, Journal of Applied Polymer Science, 105(5): 2791-2800.
22.
Urbanski, J. ( 1977). Polyurethanes, In: Urbanski, J., Czerwinski, W., Janicka, K., Majewska, F. and Zowall, H. (eds), Handbook of Analysis of Synthetic Polymers and Plastics, Chapter 11, John Wiley & Sons, Inc, Polonia.
23.
Urbanski, J. ( 1977). Chemical Methods, In: Urbanski, J., Czerwinski, W., Janicka, K., Majewska, F. and Zowall, H. (eds), Handbook of Analysis of Synthetic Polymers and Plastics, Chapter 1, John Wiley & Sons, Inc, Polonia.
Carslaw, H.S. and Jaeger, J.C. ( 1959). Conduction of Heat in Solids, Clarendon Press, Oxford.
26.
Barrera, M. and Zaritzky, N.E. ( 1981). Conductividad Térmica de Hígado Vacuno Congelado, CIDCA, Universidad Nacional de La Plata.
27.
Aranguren, M.I., Borrajo, J. and Williams, R.J.J. (1984). Study of the Formation of Shell Sand Parts Used in the Shell Molding Process, Sampe Journal, 20(3): 18-23.
28.
Matuana, L.M. , Park, C.B. and Balatinecz , J.J. (1997). Processing and Cell Morphology Relationships for Microcellular Foamed PVC/Wood-fiber Composites, Polymer Engineering and Science, 37(7): 1137-1147.
29.
Rachtanapun, P., Selke, S.E.M. and Matuana , L.M. (2003). Microcellular Foam of Polymer Blends of HDPE/PP and their Composites with Wood Fiber, Journal of Applied Polymer Science, 88(12): 2842-2850.
30.
Shogren, R.L. , Lawton, J.W. and Tiefenbacher , K.F. (2002). Baked Starch Foams: Starch Modifications and Additives Improve Process Parameters , Structure and Properties, Industrial Crops and Products , 16: 69-79.
31.
Averous, L. , Fringant, C. and Moro, L. (2001). Plasticized Starch-Cellulose Interactions in Polysaccharide Composites, Polymer, 42: 6565-6572.
32.
Lodha, P. and Netravali, A.N. ( 2002). Characterization of Interfacial And Mechanical Properties of ‘Green’ Composites with Soy Protein Isolate and Ramie Fibers , Journal of Material Science, 37: 3657-3665.
33.
Wu, J.-W. , Sung, W.-F. and Chu, H.-S. (1999). Thermal Conductivity of Polyurethane Foams, International Journal of Heat and Mass Transfer, 42: 2211-2217.
34.
Tseng, C.-J. , Yamaguchi, M. and Ohmori, T. (1997). Thermal Conductivity of Polyurethane Foams from Room Temperature to 20 K, Cryogenics , 31: 305-312.
35.
Aranguren, M.I., Marcovich, N.E. and Reboredo, M.M. (2000). Composites Made from Lignocellulosics and Thermoset Polymers, Molecular Crystals and Liquid Crystals, 353: 95-108.
36.
Beall, F.C. ( 1986). Thermal Degradation of Wood, In: Bever, M.B. (ed.), Encyclopedia of Materials Science and Engineering , 1st edn, Vol. 7, pp. 4933-4935, Pergamon Press, Oxford.
37.
Marcovich, N.E., Reboredo, M.M. and Aranguren , M.I. (2001). Modified Woodflour as Thermoset Fillers. II. Thermal Degradation of Woodflours and Composites, Termochimica Acta, 372: 45-57.
38.
Wang, F. ( 1998). Polydimethylsiloxane Modification of Segmented Thermoplastic Polyurethanes and Polyureas, PhD Thesis, Faculty of theVirginia Polytechnic Institute and State University, Blacksburg, Virginia.
39.
Somani, K.P. , Kansara, S.S., Patel, N.K. and Rakshit, A.K. (2003). Castor Oil-based Polyurethane Adhesives for Wood-to-Wood Bonding, International Journal of Adhesion & Adhesives, 23: 269-275.
40.
Gibson, L.J. and Ashby, M.F. ( 1988). Cellular Solids: Structure and Properties, Pergamon Press, Oxford.
41.
Guan, J. and Hanna, M.A. ( 2004). Functional Properties of Extruded Foam Composites of Starch Acetate and Corn Cob Fiber, Industrial Crops and Products , 19(3): 255-269.
42.
Maharsia, R.R. and Jerro, H.D. (2007). Enhancing Tensile Strength and Toughness in Syntactic Foams through Nanoclay Reinforcement, Materials Science and Engineering A, 454-455: 416-422.
43.
Shen, H. and Nutt, S. ( 2003). Mechanical Characterization of Short Fiber Reinforced Phenolic Foam, Composites: Part A, 34: 899-906.
44.
Alonso, M.V., Auad, M.L. and Nutt, S. ( 2006). Short-fiber-reinforced Epoxy Foams, Composites: Part A, 37: 1952-1960.
