In the present study, the fracture energy of hybrid carbon fiber reinforced polymers was investigated. The composites were modified by the addition of multi-walled carbon nanotubes into the matrix material. The interlaminar fracture properties under Mode I and Mode II remote loading were studied as a function of the carbon nanotube content in the matrix. With the addition of carbon nanotubes in the epoxy matrix, a significant increase in the load bearing ability as well as in the fracture energy was observed, for both Mode I and Mode II tests. It is speculated that carbon nanotubes due to their large aspect ratio have a significant toughening effect since extra energy is needed in order to pull them out from the matrix and start the crack propagation following a kinking out pattern at nanoscale.
Masters, J.E. (1989). Improved Impact and Delamination Resistance though Interleafing, Key Engineering Material, 37: 317-348.
2.
Stevanovic, M.M. and Stecenko, T.B. (1992). Mechanical Behaviour of Carbon and Glass Hybrid Fiber Reinforced Polyester Composites , Journal of Material Science, 27: 941-946.
3.
Robertson, J. (2004). Realistic application of CNTs, Materials Today, 7: 1153-1158.
4.
Hammel, E., Tang, X., Trampert, M., Schmitt, T., Mauthner, K., Eder, A. and Prötschke, P. (2004). Carbon Nanofibers for Composite Applications, Carbon, 42(6): 1153-1158.
5.
Kostopoulos, V., Tsantzalis, S., Karapappas , P., Vavouliotis, A., Tsotra, P., Paipetis, A. and Friedrich, K. (2007). Enhancement of the Mechanical Performance of an Epoxy Resin and Fiber Reinforced Epoxy Resin Composites by the Introduction of CNF and PZT Particles at the Microscale, Composites Part A, 38: 1076-1081.
6.
Kostopoulos, V., Tsantzalis, S., Karapappas , P., Vavouliotis, A., Tsotra, P., Tanimoto, T. and Friedrich, K. (2007). On the Improvement of Toughness of CFRPs with Resin Doped with CNF and PZT Particles, Composites Part A, 38: 1159-1162.
Iijima, S. (1991). Helical microtubules of graphitic carbon, Nature, 354: 56.
9.
Iijima, S. and Ichihashi, T. (1993). Single-shell Carbon Nanotubes of 1-nm Diameter , Nature, 363: 603.
10.
Bethune, D.S. , Kiang, C.H., de Vries, M.S., Gorman, G., Savoy, R., Vazquez, J. and Beyers, R. (1993). Cobalt-catalysed Growth of Carbon Nanotubes with Single-atomic-layer Walls , Nature , 363: 605.
11.
Tanaka, K., Kageyama, K. and Hojo, M. (1995). Prestandarisation Study on Mode II Interlaminar Fracture Toughness Test on CFRP in Japan, Composites, 26: 257-267.
12.
Davies, P., Blackman, B.R. and Brunner, A.J. (1998). Standard Test Methods for Delamination Resistance of Composite Materials: Current Status, Applied Composites Materials, 5: 345-364.
13.
Carlsson, L.A. and Byron Pipes, R. (1987). Experimental Characterization of Advanced Composite Materials, p. 168, Prentice-Hall International Limited, London, UK.
14.
Kostopoulos, V. (2000). Fracture toughness and Fatigue Crack Growth, In Gdoutos, E.E., Rodopoulos, C.A. and Pilakoutas, K. (eds), Failure Analysis of Industrial Composite Materials , McGraw-Hill, New York.
15.
Russell, A.J. and Street, K.N. (1986). Moisture and Temperature Effects on Mixed-Mode Delamination and Debonding of Materials , ASTM STP, 876: 349.
16.
Mathews, F.L. and Rawlings, R.D. (1999). Composite Materials: Engineering and Science, pp. 121-128, Woodhead Publishing Limited, Oxford, England.
17.
Chen, J.H., Schulz, E., Bohse, J. and Hinrichsen, G. (1999). Effect of the Fiber Content on the Interlaminar Fracture Toughness of Unidirectional Glass-fiber/Polyamide Composite, Composites Part A, 30: 747-755.
18.
Sohn, C.H., Chang, R.R. and Jeng, P.H. (1995). On the Fiber-bridging of Cracks in Fiber-reinforced Composites, Mechanics of Materials, 20: 165-181.
19.
Lee, S.H. , Noguchi, H. and Kim , Y.B. (2002). Effect of Interleaved Non-woven Carbon Tissue on Interlaminar Fracture Toughness of Laminated Composites: Part I - Mode II, Journal of Composite Materials, 36: 2153-2168.
20.
Barber, A.H. , Sidney, R., Cohen , S.R., Kenig, S. and Wagner, H.D. (2004). Interfacial Fracture Energy Measurements for Multi-walled Carbon Nanotubes Pulled from a Polymer Matrix, Composites Science and Technology , 64: 2283-2289.
21.
Wichmann, M.H.G. , Sumfleth, J., Gojny , F.H., Quaresimin, M., Fiedler, B. and Schulte, K. (2006). Glass Fiber-reinforced Composites with Enhanced Mechanical and Electrical Properties - Benefits and Limitations of a Nanoparticle Modified Matrix, Engineering Fracture Mechanics, 73: 2346-2359.
22.
Gojny, F.H. , Nastalczyk, J., Roslaniec , Z. and Schulte, K. (2003). Surface Modified Carbon Nanotubes in CNT/epoxy-composites, Chemical Physics Letters , 370: 820-824.
23.
Ganguli, S. , Aglan, H., Dennig , P. and Irvin, G. (2006). Effect of Loading and Surface Modification of MWCNTs on the Fracture Behavior of Epoxy Nanocomposites , Journal of Reinforced Plastics and Composites, 25(2): 175-188.
24.
Desai, AV and Haque, M.A. (2005). Mechanics of the Interface for Carbon Nanotube-polymer Composites, Thin Walled Structures, 43: 1787-1803.
25.
Zhu, J. , Imam, A., Crane , R., Lozano, K., Khabashesku, V.N. and Barrera, E.V. (2007). Processing a Glass Fiber Reinforced Vinyl Ester Composite with Nanotube Enhancement of Interlaminar Shear Strength, Composites Science and Technology, 67: 1509-1517.
26.
Zhou, Y., Pervin, F., Lewis, L. and Jeelani, S. (2008). Fabrication and Characterization of Carbon/Epoxy Composites Mixed with Multi-walled Carbon Nanotubes, Materials Science and Engineering A, 475: 157-165.
