This study reports characterization of polyurethane/polymethyl methacrylate (PU/PMMA, 50/50) Semi-Interpenetrating Polymer Network (SIPN) prepared by in-situ polymerization, and filled with different weight percent (wt%) of natural polymer, Gaur-Gum (GG). These are characterized for density, tensile strength and percentage elongation at break. Positron annihilation lifetime measurements have also been carried out to measure the free volume of these composites. The results show good correlation between free volume content of the composites with the mechanical properties. These natural polymer-filled composites were subjected to biodegradation using a specific microorganism, Aspergillus niger. The influence of A. niger on composites has also been studied. The results show that the weight loss of the specimens exposed to A. niger media increases with increase in gaur gum in the composite. Interestingly the weight loss of GG-filled composites seems to be more than the quantum of GG incorporated which is a clear indication that degradation of PU/PMMA system is responsible for the weight loss.
Swift, G. (1992). Biodegradable Polymers in the Environment: Are they Really Biodegradable?, Polym. Mater. Sci. Engg, 66: 403-404.
2.
American Society for Testing and Materials. ( 1996). In D 6002-96. Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics. American Society for Testing and Materials, Washington, D.C., pp. 782-787.
3.
Deutsches Institut für Normung e.V. (1997). In DIN 54900 Entwurf. Prüfung der Kompostierbarkeit von polymeren Werkstoffen , p. 17. Beuth Verlag GmbH, Berlin, Germany.
4.
Heisey, R.M. and Papadatos, S. (1995). Isolation of Microorganisms Able To Metabolize Purified Natural Rubbers, Appl. Environ. Microbiol., 61: 3092-3097.
5.
Sakai, K.N., Hamada, II and Watanabe, Y. (1986). Degradation Mechanism of poly(vinyl alcohol) by Successive Reactions of Secondary Alcohol Oxidase and β-diketone Hydrolase from Pseudomonas sp., Agric. Biol. Chem., 50: 989-996.
6.
Nelson, M., McCarthy, S.P. and Gross, R.A. (1992). Isolation of a Pseudomonas paucimobilis Capable of using Insoluble Cellulose Acetate as a Sole Carbon Source, Polym. Mater. Sci. Eng., 67: 139-140.
7.
Nishida, H. and Tokiwa, Y. (1992). Distribution of poly(β-hydroxybutyrate) and poly(ε-caprolactone) Degrading Microorganisms and Microbial Degradation behaviour on Plastic Surfaces, Polym. Mater. Sci. Eng., 67: 137-138.
8.
Doi, Y. (1990). Microbial Polyesters, VCH Publishers Inc., New York, pp. 33-98.
9.
Witt, U., Müller, R.J. and Deckwer, W.D. (1995). J. Environ. Polym. Degrad., 3: 215-223.
10.
Witt, U., Müller, R.J. and Deckwer, W.D. (1996). Evaluation of the Biodegradability of Copolyesters Containing Aromatic Compounds by Investigations of Model Oligomers, J. Environ. Polym. Degrad., 4: 9-20.
11.
Witt, U., Müller, R.J. and Deckwer, W.D. (1997). Biodegradation behavior and Material Properties of Aliphatic/Aromatic Polyesters of Commercial Importance, J. Environ. Polym. Degrad., 5: 81-89.
12.
Witt, U., Müller, R.J. and Deckwer, W.D. (1996). Studies on Sequence Distribution of Aliphatic/Aromatic Copolyesters by High-resolution 13C Nuclear Magnetic Resonance Spectroscopy for Evaluation of Biodegradability, Makromol. Chem. Phys. , 197: 1525-1535.
13.
Filip, Z. (1979). Euro. J. Appl. Microbiol. Biotechnol. , 7: 277-280.
Chulim, M.V.M. , Perez, F.B. and Escamilla , G.C. (2003). Biodegradation of Starch and Acrylic-grafted Starch by Aspergillus niger, J. Appl. Polym. Sci., 89: 2764-2770.
16.
Griffin, J.L. (1987). Degradable Plastic Films. In: Proced. of Symp. on Degradable Plastics, pp. 44-49. Washington DC , Society of Plastic Industry.
17.
Otey, F.H., Westhoff, R.P. and Doane, W.M. (1980). I&EC Prod Res Dev; Dec. pp. 592-595.
18.
Gould, J.M., Gordon, S.H., Dexter, L.B. and Swanson, C.L. (1990). In Glass, E. and Swift, G. (eds), Agricultural and Synthetic Polymers: Biodegradability and Utilization. ACS Symp. Series 433, Washington DC, Am. Chem. Soc., pp. 65-75.
19.
Kumar, H. and Siddaramaiah, 2. Improved and Simple Catalyst for the Preparation of Rigid and Elastomeric Polyurethanes (Indian Patent Application 354/CHE/2006).
20.
Mishra, V., Murphy, C.J. and Sperling, L.H. (1994). Interpenetrating Polymer Networks based on Thermoplastic Polyurethanes (TPUS) and cis-1,4-polyisoprene, J. Appl. Polym. Sci., 53: 1425-1434.
21.
Siddaramaiah, Mallu, P. and Somashekar, R. (1998). Characterization of Castor Oil-based Interpenetrating Polymer Networks of PU/PS, J. Appl. Polym. Sci., 68: 1739-1743.
22.
Jean, Y.C. (1990). Positron Annihilation Spectroscopy for Chemical Analysis: A Novel Probe for Microstructural Analysis of Polymers, Micro. Chem. J., 42: 72-102.
23.
Ramani, R. and Ranganathaiah, C. (2001). Free-volume Microprobe Study of Iodine Diffusion in Polymers, Polymer Intl., 50: 237-248.
24.
Brandt, W. and Dupasquier, A. (1983). Positron Solid State Phys A, North Holland, Amsterdam, pp. 359-407.
25.
Ravikumar, H.B. and Ranganathaiah , C. (2005). Compatibilizer-induced Microstructural Changes in poly(trimethylene terephthalate)/EPDM Blends Studied by the Positron Annihilation Lifetime Technique and Differential Scanning Calorimetry, Polymer Intl., 54: 1288-1295.
26.
Kirekegaard, P., Pedersen, N.J. and Eldrup, M. (1989). PATFIT-88: A Data Processing System for Positron Annihilation Spectra on Mainframe and Personal Computers, Riso Nat. Lab Reports, Denmark 2740.
27.
Nakanishi, H., Jean, Y.C., Smith, E.G. and Sandreczki , T.C. (1989). Positronium Formation at Free- Volume Sites in the Amorphous Regions of Semicrystalline PEEK, J. Polym. Phys., 27: 1419-1424.
28.
Nakanishi, H. , Wang, S.J. and Jean, Y.C. (1988). Positron Annihilation in Fluids, Edited by S.C. Sharma.World Scientific, Singapore, pp. 292-298.
29.
Tao, S.J. (1972). Positronium Annihilation in Molecular Substances, J. Chem. Phys., 56: 5499-5510.
30.
Eldrup, M., Lightbody, D. and Sherwood, J.N. (1981). The Temperature Dependence of Positron Lifetimes in Solid Pivalic Acid, J. Chem. Phys., 63: 51-58.
31.
Xie, X.L. , Fung, K.L., Li, R., Tjong, S.C. and Mai, Y.-W. (1997). Structural and Mechanical behavior of Polypropylene/Maleated styrene-(ethylene-co-butylene)-styrene/sisal Fiber Composites Prepared by Injection Molding, J. Polym. Sci. Part B Polym. Phys., 40: 1214-1222.
32.
Bledzki, A.K. , Faruk, O. and Huque, M. (2002). Physico-mechanical Studies of Wood Fiber Reinforced Composites, Polym. Plast. Tech. Eng. , 41: 435-451.
33.
Hristov, V.N. , Krumova, M., Vasileva, S.t. and Michler, G.H. (2004). Modified Polypropylene Wood Flour Composites. II. Fracture, Deformation, and Mechanical Properties , J. Appl. Polym. Sci., 92: 1286-1292.
34.
Okasman, K. and Lindberg, H. (1998). Influence of Thermoplastic Elastomers on Adhesion in Polyethylene-wood Flour Composites, J. Appl. Polym. Sci., 68: 1845-1855.
35.
Thwe, M.M. and Liao, K. (2002). Effects of Environmental Aging on the Mechanical Properties of Bamboo-glass Fiber Reinforced Polymer Matrix Hybrid Composites , Composites, 33: 43-52.
36.
Jacob, M., Thomas, S. and Verughese, K.T. (2004). Mechanical Properties of Sisal/Oil Palm Hybrid Fiber Reinforced Natural Rubber Composites, Comp. Sci. Tech. , 64: 955-965.
37.
Gatenholm, P. , Bertilsson, H. and Mathiasson, A. (1993). The Effect of Chemical Composition of Interphase on Dispersion of Cellulose Fibers in Polymers. I. PVC-Coated Cellulose in Polystyrene, J. Appl. Polym. Sci., 49: 197-208.
38.
Rana, A.K., Mandal, A., Mitra, B.C., Jocobson, R., Rowell, R. and Banerjee, A.N. (1998). Short Jute Fiber-reinforced Polypropylene Composites: Effect of Compatibilizer, J. Appl. Polym. Sci., 69: 329-338.
39.
Rozman, H.D., Tan, K.W., Kumar, R.N., Abubakar, A., Ishak, Z.A.M. and Ismail, H. (2000). The Effect of Lignin as a Compatibilizer on the Physical Properties of Coconut Fiber-Polypropylene Composites, Eur. Polym . J., 36: 1483-1494.
40.
Redondo, S.U.A. , Gonsalves, M.C. and Yoshida, I.V.P. (2003). Eucalyptus Kraft Pulp Fibers as an Alternative Reinforcement of Silicone Composites. II Thermal, Morphological, and Mechanical Properties of the Composites, J. Appl. Polym. Sci., 89: 3739-3746.
41.
Ali, K.M.I. , Khan, M.A., Balo, S.K. and Ahmad, M.U. (1998). Effect of Additives on Reinforcement of Radiation-induced Jute-urethane Polymer Composites, J. Appl. Polym. Sci., 67: 79-85.
42.
Ademark, P., de Vries, R.P., Hägglund, P., Stalbrand, H. and Visser, J. (2001). Cloning and Characterization of Aspergillus Niger Genes Encoding an Alpha- galactosidase and a Alphamannosidase Involved in Galactomannan Degradation, Eur. J. Biochem., 268: 2982-2990.
43.
Meier, H. and Reid, J.S.G. (1982). In: Loewus, F.A. and Tanner, W. (eds), Encyclopaedia of Plant Physiology Vol. 13A, pp. 418-471. Springer Verlag, Berlin, Germany.
44.
Chiellini, E., Solaro, R., Corti, A., Picci, G., Leporini, C., Pera, A., Vallini, G. and Donaggio, P. (1991). Degradation of Starch Filled Polyethylene Films in a Composting Environment, Chim. Indust., 8-9: 656-663.
45.
Pirt, S.J. (1980). Microbial Degradation of Synthetic Polymers, J. Chem. Tech. Biotechnol., 30: 176-179.
46.
Singleton, I. (1994). Microbial Metabolism of Xenobiotics: Fundamental and Applied Research, J. Chem. Tech. Biotechnol., 59: 9-23.
47.
Ali, S. , Ikram-ul-Haq, Qadeer, M.A. and Iqbal, J. (2002). Production of Citric Acid by Aspergillus niger using Cane Molasses in a Stirred Fermentor, E. J. Biotech. , 5(3): 258-271.
48.
Van de Merbel, N.C., Ruijter, G.J.G., Lingeman, H., U.A. Th, Brinkman and Visser , J. (1994). Oxalic Acid Production by Aspergillus niger: An Oxalate-non- producing Mutant Produces Citric Acid at pH 5 and in the Presence of Manganese, Appl. Microbiol. Biotechnol., 41: 658-663.
49.
Hayaishi, O. , Shimazono, H., Katagiri, M. and Saito, Y. (1956). Enzymatic Formation of Oxalate and Acetate from Oxaloacetate, J. Am. Chem. Soc., 78: 5126-5127.
50.
Muller, H.-M. (1975). Oxalate Accumulation from citrate by Aspergillus niger, Arch. Microbiol., 103: 185-189.
51.
Lenz, H., Wunderwald, P. and Eggerer, H. (1976). Partial Purification and some Properties of Oxalacetase from Aspergillus niger, Eur. J. Biochem., 63: 225-236.
52.
Shanta, T. and Rati, E.R. (1990). Isolation and Characterization of an Aflatoxin-Inhibiting Metabolite from A. niger, Curr. Sci., 59: 326-327.
53.
Bikiaris, D. and Panayiotou, C. (1998). LDPE/starch Blends Compatibilized with PE-g-MA Copolymers, J. Appl. Polym. Sci., 70: 1503-1521.
