In this study, the wetting behavior of oxide and metallic coated SiC substrate with Al—Si—Mg alloy has been investigated. SiC substrate and particles were coated with SiO2, TiO2, and metallic Ni by using thermo-chemical treatment, sol-gel and electroless coating techniques, respectively. Also, the effect of doping elements (Ni, Cu and Fe in TiO2 coating) on the wettability has been investigated. Coatings were characterized by SEM, EDS, XRD, and by means of surface roughness. Contact angle results demonstrate that metallic Ni coating significantly improves the wettability. However, doping elements did not alter the results due to their detrimental effect on surface roughness.
Lee, J.C. , Ahn, J.P., Shim, J.H., Shi, Z. and Lee, H. (1999). Control of the Interface in SiC/Al Composites, Scripta Mater., 41(8): 895-900.
2.
Hashim, J., Looney, L. and Hashmi, M.S.J. (2001). The Wettability of SiC Particles by Molten Aluminium Alloy, J. of Mater. Proc. Tech., 119: 324-328.
3.
Hashim, J., Looney, L. and Hashmi, M.S.J. (2001). The Enhancement of Wettability of SiC Particles in Cast Aluminium Matrix Composites, J. Mater. Proc. Tech. , 119: 329-335.
4.
Rajan, T.P.D. , Pillai, R.M. and Pai, B.C. (1998). Review Reinforcement Coatings and Interfaces in Aluminium Metal Matrix Composites, J. Mater. Sci., 33: 3491-3503.
5.
Tekmen, C. and Cocen, U. (2006). The Effect of Ceramic Coatings on the Wettability of Al-SiC Composites, J. Turkish Ceramic Federation, 17: 118-125.
6.
Yang, G., Fan, T. and Zhang, D. (2004). Interfacial Reaction of Al Matrix Composites Reinforced with TiO2-coated SiC Particles During Remelting, Mater. Letters , 58: 1546-1552.
7.
Lefebvre, L.P. , L'esperance, G. and Surey, M. (1997). Particle Degradation During Remelting of Al-1% Mg Alloy Reinforced with SiCp Coated with sol-gel-produced TiO2, J. Mater. Sci., 32: 3987-3994.
8.
Tekmen, C., Ozdemir, I., Cocen, U. and Onel, K. (2003). The Mechanical Response of Al-Si-Mg/SiCp Composite: Influence of Porosity, Mater. Sci. and Eng. A, 360: 365-371.
9.
Tekmen, C. and Cocen, U. (2003). The Effect of Si and Mg on Age Hardening Behavior of Al-SiCp Composites, J. Composite Mater., 37: 1791-1800.
10.
Pech-canul, M.I., Katz, R.N. and Makhlouf, M.M. (2000). Optimum Parameters for Wetting Silicon Carbide by Aluminum Alloys, Metall. and Mater. Trans. A., 31: 565-573.
11.
Rado, C., Kalogeropoulou, S. and Eustathopoulos, N. (2000). Bonding and Wetting in Non-reactive Metal:SiC Systems: Weak or Strong Interfaces? Mater. Sci. and Eng. A., 276: 195-202.
12.
Kennedy, A.R. and Karantzalis, A.E. (1999). The Incorporation of Ceramic Particles in Molten Aluminium and the Relationship to Contact Angle Data, Mater. Sci. and Eng. A., 264: 122-129.
13.
Rado, C., Kalogeropoulou, S. and Eustathopoulos, N. (2000). Wetting and Adhesion in Metal-silicon Carbide Systems: the Effect of Surface Polarity of SiC, Scripta Mater., 42: 203-208.
14.
Ouyang, Q.B. , Zhou, W.M., Zhang, G.D. and Zhang, D. (2007). Wettability and its Improvement at Al/SiC Interface, Key Eng. Mater., 351: 52-57.
15.
Muolo, M.L. , Valenza, F., Passerone, A. and Passerone, D. (2008). Oxygen Influence on Ceramics Wettability by Liquid Metals: Ag-αAl2O3-Experiments and Modeling, Materials Science and Engineering A, doi:10.1016/j.msea.2007.06.101
16.
Kumara, G. and Prabhu, K.N. (2007). Review of Non-reactive and Reactive Wetting of Liquids on Surfaces, Adv. Colloid and Inter. Sci., 133: 61-89.
17.
Nikolayeva, V.S., Gavrilyukc, S.L. and Gouin, H. (2006). Modeling of the Moving Deformed Triple Contact Line: Influence of the Fluid Inertia, J. Colloid and Inter. Sci., 302: 605-612.
18.
Libo, L., Maozhong, A. and Gaohui, W. (2006). A New Electroless Nickel Deposition Technique to Metallise SiCp/Al Composites, Surf. and Coat.Tech., 200(16-17): 5102-5112.
19.
Tekmen, C., Ervardar, O. and Cocen, U. (2007). Production of Al Based Composite Reinforced with SnO2 Coated SiC Particles, J. Composite Mater., 41: 3027-3033.
20.
Feng, A., McCoy, B.J., Munir, Z.A. and Cagliostro, D. (1998). Wettability of Transition Metal Oxide Surfaces, Mater. Sci. and Eng. A., 242: 50-56.
21.
Ip, S.W. , Sridhar, R., Toguri, J.M., Stephenson, T.F. and Warner, A.E.M. (1998). Wettability of Nickel Coated Graphite by Aluminium, Mater. Sci. and Eng. A., 244: 31-38.
22.
Leon, C.A. and Drew, R.A.L. (2002). The Influence of Nickel Coating on the Wettability of Aluminum on Ceramics. Composites A, 33: 1429-1432.
