Sage Journals: Discover world-class research

Abstract

An investigation was carried out on SnO₂ coating of SiC particles by sol-gel technique and the production of SnO₂ coated 20 vol% SiC particle reinforced composite and unreinforced matrix alloy by squeeze casting. The morphology of the coating and microstructural, interfacial and mechanical properties of the composite were characterized by using an optical microscope, image analyzer, scanning electron microscope (SEM), energy dispersion spectroscopy (EDS), and X-ray diffraction (XRD). It has been found that the coating is not degraded during the fabrication process; in other words, SnO₂ coating by sol-gel technique is an effective way to improve the matrix/reinforcement interfacial properties.

Keywords

sol-gel squeeze casting Al—Sic SnO2 surface coating.

Get full access to this article

View all access options for this article.

References

Lee, J.C. , Ahn, J.P. , Shim, J.H. , Shi, Z. and Lee, H.I. (1999). Control of the Interface in SiC/Al Composites , Scripta Materialia, 41(8): 895—900 .

Rajan, T.P.D. , Pillai, R.M. and Pai B.C. (1998). Review Reinforcement Coatings and Interfaces in Aluminium Metal Matrix Composites, Journal of Materials Science, 33: 3491—3503 .

Shi, Z. , Yang, J.M. , Fan, T. , Zhang, D. and Wu, R. (2000). The Melt Structural Characteristics Concerning the Interfacial Reaction in SiC(p)/Al Composites , Applied Physics, A71: 203—209 .

Thakur, S.K. and Dhindaw, B.K. (2001). The Influence of Interfacial Characteristics Between SiCp and Mg/Al Metal Matrix on Wear, Coefficient of Friction and Microhardness , Wear, 247: 191—201 .

Tang, W.M. , Zheng, Z.X. , Ding, H.F. and Jin, Z.H. (2003). Control of the Interface Reaction between Silicon Carbide and Iron, Materials Chemistry and Physics, 80: 360—365 .

Wang, R.M. , Surappa, M.K. , Tao, C.H. , Li, C.Z. and Yan, M.G. (1998). Microstructure and Interface Structure Studies of SiCp-Reinforced Al (6061) Metal-Matrix Composites , Materials Science and Engineering, A254: 219—226 .

Rams, J. , Urena, A. and Campo, J. (2004). Sol-Gel Coatings as Active Barriers to Protect Ceramic Reinforcement in Aluminum Matrix Composites , Advanced Engineering Materials, 6(1—2): 57—61 .

Wen, T. , Gao, J. , Shen, J. and Zhou, Z. (2001). Preparation and Characterization of TiO2 Thin Films by the Sol-Gel Process , Journal of Materials Science, 36: 5923—5926 .

Yang, G. , Fan, T. and Zhang, D. (2004). Chemical Reaction in Al Matrix Composite Reinforced with SiCp Coated by SnO2 , Journal of Materials Science, 39: 3689—3694 .

10.

Kolsgaard, A. , Arnberg, L. and Brusethaug, S. (1993). Solidification Micro-Structures of AlSi7Mg-SiC Particulate Composite , Materials Science Engineering , A173: 243—250 .

11.

Tekmen, C. , Ozdemir, I. , Cocen, U. and Onel, K. (2003). The Mechanical Response of Al—Si—Mg/SiCp Composite: Influence of Porosity , Materials Science and Engineering , A360(1—2): 365—371 .

12.

Ahmad, S.N. , Hashim, J. and Ghazali, M.I. (2005). The Effects of Porosity on Mechanical Properties of Cast Discontinuous Reinforced Metal—Matrix Composite, Journal of Composite Materials, 39(5): 451—466 .

13.

Skolianos, S.M. , Kiourtsidis, G. and Xatzifotiou , T. (1997). Effect of Applied Pressure on the Microstructure and Mechanical Properties of Squeeze-Cast Aluminum AA6061 Alloy , Materials Science and Engineering, A231: 17—24 .

14.

Ahmad, Z. (2001). Mechanical Behavior and Fabrication Characteristics of Aluminum Metal Matrix Composite Alloys , Journal of Reinforced Plastics and Composites, 20(11): 921—944 .

15.

Chen, L.G. , Shue, K.H. , Chang, S.Y. and Lin, S.J. (2002). Squeeze Casting of SiCp/Al-Alloy Composites with Various Contents of Reinforcements , Journal of Materials Research , 17(2): 376—385 .

Production of A1 Based Composite Reinforced with SnO 2 Coated SiC Particles

Abstract

Keywords

Get full access to this article

References