Restricted accessResearch articleFirst published online 2008-02
Elastic Properties of Short-fiber Polymer Composites,Derivation and Demonstration of Analytical Forms for Expectation and Variance from Orientation Tensors
Existing methods for predicting elastic properties of short-fiber polymer composites from fiber orientation tensors are based on the orientation average of a transversely isotropic stiffness tensor. These evaluations focus solely on average properties and have yet to include a quantitative measure of property variation. Recognizing the statistical nature of fiber orientations within the composite commonly defined through the fiber orientation distribution function, analytical expressions are developed here to predict both expectation and variance of the material stiffness tensor from a fiber orientation distribution function. The fiber orientation distribution function is expanded through the Laplace series of complex spherical harmonics and results demonstrate that material stiffness tensor expectation is a function of orientation tensors up through fourth-order and the corresponding variance requires orientation tensors up through eighth-order. Numerical simulations obtained with the method of Monte-Carlo for sample sets generated from statistically independent unidirectional samples belonging to the fiber orientation distribution function from the accept—reject generation algorithm are shown to agree with the analytic expressions for material expectation and variance.
Folgar, F.P. and Tucker, C.L. (1984). Orientation Behavior of Fibers in Concentrated Suspensions, Journal of Reinforced Plastics and Composites, 3(2): 98—119.
2.
Advani, S.G. and Tucker, C.L. (1987). The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites , Journal of Rheology, 31(8): 751—784.
3.
Hand, G.L. (1962). A Theory of Anisotropic Fluids, Journal of Fluid Mechanics, 13(1): 33—46.
4.
Altan, M.C., Advani, S.G., Guceri, S.I. and Pipes, R.B. (1989). On the Description of the Orientation State for Fiber Suspensions in Homogeneous Flows, Journal of Rheology , 33(7): 1129—1155.
5.
Cintra, J.S. and Tucker, C.L. (1995). Orthotropic Closure Approximations for Flow-Induced Fiber Orientation, Journal of Rheology, 39(6): 1095—1122.
6.
VerWeyst, B.E. , Tucker, C.L., Foss , P.H. and O'Gara , J.F. (1999). Fiber Orientation in 3-D Injection Molded Features: Prediction and Experiment , International Polymer Processing, 14(4): 409—420.
7.
Dupret, F. and Verleye, V. (1999). Modelling the Flow of Fiber Suspensions in Narrow Gaps. In: Siginer, D.A., Kee, D.D. and Chhabra, R.P. (eds) Advances in the Flow and Rheology of Non-Newtonian Fluids, Part B, pp. 1347—1398. Elsevier , Amsterdam, The Netherlands.
8.
Chung, D.H. and Kwon, T.H. (2002). Invariant-Based Optimal Fitting Closure Approximation for the Numerical Prediction of Flow-Induced Fiber Orientation, Journal of Rheology, 46(1): 169—194.
9.
Jack, D.A. and Smith, D.E. (2005). An Invariant Based Fitted Closure of the Sixth-order Orientation Tensor for Modeling Short-Fiber Suspensions, Journal of Rheology, 49(5): 1091—1116.
10.
Han, K.-H. and Im, Y.-T. (2002). Numerical Simulation of Three-Dimensional Fiber Orientation in Short-Fiber-Reinforced Injection-Molded Parts, Journal of MaterialsProcessing Technology , 124(3): 366—371.
11.
Camacho, C.W. , Tucker, C.L., Yalvac , S. and McGee , R.L. (1990). Stiffness and Thermal Expansion Predictions for Hybird Short Fiber Composites , Polymer Composites, 11(4): 229—239.
12.
Moginger, B. and Eyerer, P. (1991). Determination of the Weighting Function g(βi, r, vf) for Fibre Orientation Analysis of Short Fibre-ReinforcedComposites,Composites , 22(5): 394—399.
13.
Reifschneider, L.G. and Akay, H.U. (1994). Applications of a Fiber Orientation Prediction Algorithm for Compression Molded Parts With Multiple Charges, Polymer Composites, 15(4): 261—269.
14.
Zhu, Y.T. , Blumenthal, W.R. and Lowe, T.C. (1997). Determination of Non-Symmetric 3-D Fiber-Orientation Distribution and Average Fiber Length in Short-Fiber Composites, Journal of Composite Materials, 31(13): 1287—1301.
15.
Haag, R. (2003). Optimization of the Warpage of Fiber Reinforced Thermoplastics by Influencing the Fiber Orientation, ANTEC 2003 — Proceedings of the 61st Annual Technical Conference and Exhibition, 49: 661—664.
16.
Yang, W.-H., Hsu, D.C., and Yang, V. (2003). Computer Simulation of 3D Short Fiber Orientation in Injection Molding, ANTEC 2003 — Proceedings of the 61st Annual Technical Conference and Exhibition, 49: 651—655.
17.
Jack, D.A. and Smith, D.E. (2007). The Effect of Fiber Orientation Closure Approximations on Mechanical Property Predictions, Composites, Part A, 38(3): 975—982.
18.
Jack, D.A. (2006). Advanced Analysis of Short-fiber Polymer Composite Material Behavior, PhD Dissertation, University of Missouri — Columbia.
19.
Lielens, G. , Pirotte, P., Couniot , A., Dupret, F. and Keunings, R. (1998). Prediction of Thermo-Mechanical Properties for Compression Moulded Composites , Composites Part A, 29(1—2): 63—70.
20.
Dunn, M.L., Ledbetter, H., Heyliger, P.R. and Choi, C.S. (1996). Elastic Constants of Textured Short-Fiber Composites , Journal of the Mechanics and Physics of Solids, 44(9): 1509—1541.
21.
Doghri, I. and Tinel, L. (2006). Micromechanics of Inelastic Composites with Misaligned Inclusions: Numerical Treatment of Orientation, Computer Methods in Applied Mechanics and Engineering, 195(13—16): 1387—1406.
22.
Hogg, R.V., McKean, J.W. and Craig, A.T. (2005). Introduction to Mathematical Statistics, Pearson Prentice Hall, Upper Saddle River, NJ.
23.
Jeffery, G.B. (1923). The Motion of Ellipsoidal Particles Immersed in a Viscous Fluid, Proceedings of the Royal Society of London A, 102(715): 161—179.
24.
Kamal, M.R. and Mutel, A.T. (1989). The Prediction of Flow and Orientation Behavior of Short Fiber Reinforced Melts in Simple Flow Systems , Polymer Composites, 10(5): 337—343.
25.
Koch, D.L. (1995). A Model for Orientational Diffusion in Fiber Suspensions , Physics of Fluids, 7(8): 2086—2088.
26.
Phan-Thien, N., Fan, X.-J., Tanner, R.I. and Zheng, R. (2002). Folgar-Tucker Constant for a Fibre Suspension in a Newtonian Fluid, Journal of Non-Newtonian Fluid Mechanics, 103(2—3): 251—260.
27.
Tucker, C.L. , Wang, J., O'Gara, J.F., and DeBarr , G. (2004). Improved Fiber Orientation Predictions for Injection Molded Composites, NSF/DOE/APC Workshop: The Future of Modeling in Composites Molding Processes, June 2004, Washington, D.C.
28.
Jack, D.A. (2006). Incorporation of Directionally Dependant Diffusion with Polymer Composite Flow Theory. M.S. Thesis, University of Missouri — Columbia.
29.
Bay, R.S. and Tucker, C.L. (1991). Fiber Orientation in Simple Injection Moldings: Part 1 — Theory and Numerical Methods, Plastics and Plastic Composites: Material Properties, Part Performance, and Process Simulation, ASME1991, 29: 445—471.
30.
Jack, D.A. and Smith, D.E. (2004). Assessing the Use of Tensor Closure Methods With Orientation Distribution Reconstruction Functions, Journal of Composite Materials, 38(21): 1851—1872.
31.
Wetzel, E.D. (1999). Modeling Flow-Induced Microstructure of Inhomogeneous Liquid—Liquid Mixtures, Ph.D. Dissertation, University of Illinois at UrbanaChampaign.
32.
Petty, C.A., Parks, S.M., and Shiwei, M.S. (1999). Flow-Induced Alignment of Fibers, Proceedings of ICCM-12. July 1999, Paris, France.
33.
VerWeyst, B.E. , and Tucker C.L. III (2002). Fiber Suspensions in Complex Geometries: Flow-Orientation Coupling, The Canadian Journal of Chemical Engineering, 80(6): 1093—1106.
34.
Chung, D.H., and Kwon, T.H. (2001). Improved Model of Orthotropic Closure Approximation for Flow Induced Fiber Orientation, Polymer Composites, 22(5): 636—649.
35.
Malvern, L.E. (1969). Introduction to the Mechanics of a Continuous Medium, Prentice-Hall, New Jersey .
36.
Jones, R.M. (1999). Mechanics of Composite Materials, 2nd edn, Taylor and Francis, Inc., Philadelphia, PA.
37.
Tucker, C.L. and Liang, E. (1999). Stiffness Predictions for Unidirectional Short-Fiber Composites: Review and Evaluation . Composites Science and Technology, 59(5): 655—671.
38.
Wright, C.M. (1988). Prediction of Elastic Properties and Thermal Expansion for MultiComponent Composits. M.S. Thesis, University of Illinois at Urbana-Champaign.
39.
Onat, E.T. (1982). Representation of Inelastic Behavior in the Presence of Anisotropy and Finite Deformations, Plasticity of Metals at Finite Strain Theory, Experiment and Computation, pp. 519—544,Division of Applied Mechanics, Stanford University, Stanford, CA.
40.
Onat, E.T. (1982). Representation of Inelastic Behavior in the Presence of Anisotropy and of Finite Deformations, In: Wilshire, B. and Owen, D.R.J. (eds), Recent Advances in Creep and Fracture of Engineering Materials and Structures, pp. 231—264. Pineridge Press Limited, West Cross, Swansea, UK.
41.
Onat, E.T. and Leckie, F.A. (1988). Representation of Mechanical Behavior in the Presence of Changing Internal Structure, Journal of Applied Mechanics , 55(1): 1—10.
42.
Gel'Fand, I.M. , Minlos, R.A. and Shapiro, Z.Ya. (1963 ). Representations of the Rotation and Lorentz Groups and Their Applications, Pergamon Press Limited, Oxford.
43.
Jack, D.A., and Smith, D.E. (2005). A Statistical Method to Obtain Material Properties from the Orientation Distribution Function for Short-Fiber Polymer Composites , Proceedings of ASME IMECE'05, November, 2005.
44.
Bevington, P.R. and Robinson, K. (1992). Data Reduction and Error Analysis for the Physical Sciences, WCB/McGraw-Hill , Boston, MA.
45.
Altan, M.C. , Subbiah, S., Guceri , S.I. and Pipes, R.B. (1990). Numerical Prediction of Three-Dimensional Fiber Orientation in Hele-Shaw Flows , Polymer Engineering and Science, 30(14): 848—859.
46.
Khisty, C.J. and Mohammadi, J. (2001). Fundamentals of Systems Engineering: with Economics, Probability, and Statistics, Prentice Hall, Upper Saddle River, NJ.
47.
Press, W.H., Teukolsky, S.A., Vetterling, W.T. and Flannery, B.P. (2003). Numerical Recipes in Fortran 77: The Art of Scientific Computing, 2nd edn, Vol. 1, Cambridge University Press, New York, NY.
48.
Bay, R.S. (1991). Fiber Orientation in Injection Molded Composites: A Comparison of Theory and Experiment. Ph.D. Dissertation , University of Illinois at Urbana-Champaign.
49.
Wade, W.R. (2000). An Introduction to Analysis, 2nd edn, Prentice Hall, Upper Saddle River, NJ.
50.
Tucker, C.L. and Advani, S.G., (1994). Processing of Short-Fiber Systems, In: Advani, S.G. (ed.), Flow and Rheology in Polymer Composites Manufacturing, pp. 147—202. Elsevier Science, Amsterdam, The Netherlands.
