Thermally conductive resins are needed for fuel cell bipolar plates. Varying amounts of three different carbons (carbon black, synthetic graphite particles, and carbon fiber) were added to Vectra A950RX Liquid Crystal Polymer. The resulting single filler composites were tested for thermal conductivity. In addition, the effects of single fillers and combinations of two different carbon fillers were studied via a factorial design. Synthetic graphite caused the largest statistically significant increase in composite through plane and in plane thermal conductivity. Composites containing synthetic graphite/carbon black and synthetic graphite/carbon fiber caused a statistically significant increase in through plane and in plane thermal conductivity.
Finan, J.M. (1999). Thermally Conductive Thermoplastic Materials, In: Proceedings of the Society of Plastics Engineers Annual Technical Conference, New York, USA, May 2—6, pp. 1547—1550.
2.
Agari, Y. and Uno, T. (1985). Thermal Conductivity of Polymer Filled with Carbon Materials: Effect of Conductive Particle Chains on Thermal Conductivity, Journal of AppliedPolymer Science, 30(5): 2225—2235.
Bigg, D.M. (1985). Effect of Compounding on the Properties of Short Fiber Reinforced Injection Moldable Thermoplastic Composites, PolymerComposites, 6(1): 20—28.
6.
Nagata, K., Iwabuki, H. and Nigo, H. (1999). Effect of Particle Size of Graphites on Electrical Conductivity of Graphite/polymer Composite, Composite Interfaces , 6(5): 483—495.
7.
Demain, A. (1994). Thermal Conductivity of Polymer-Chopped Carbon fibre Composites. Ph.D. Dissertation, Universite Catholique de Louvain, Louvain-la-Neuve, Belgium.
8.
King, J.A., Tucker, K.W., Meyers, J.D., Weber, E.H., Clingerman, M.L. and Ambrosius, K.R. (2001). Factorial Design Approach Applied to Electrically and Thermally Conductive Nylon 6,6, PolymerComposites, 22(1): 142—154.
9.
Murthy, M.V. (1994). Permanent EMI Shielding of Plastics Using Copper Fibers, In: Proceedings of the Society of Plastics Engineers Annual Technical Conference, San Francisco, California , USA, May 1—5, pp. 1396—1400.
Mapleston, P. (1992). Conductive Composites Get a Growth Boost from Metallic Fibers, Modern Plastics, 69(May): 80—83.
12.
Donnet, J.-B. , Bansal, R.C. and Wang, M.-J. (1993), Carbon Black, 2nd edn, Marcel Dekker, Inc., New York.
13.
Huang, J.-C. (2002). Carbon Black Filled Conducting Polymers and Polymer Blends, Advances in Polymer Technology,21(4): 299—313.
14.
Bigg, D.M. (1979). Mechanical, Thermal, and Electrical Properties of Metal Fiber-filled Polymer Composites, Polymer Engineering and Science, 19(16): 1188—1192.
15.
Wilson, M.S. and Busick, D.N. (2001). U.S. Patent Number 6,248,467. Composite Bipolar Plate for Electrochemical Cells.
16.
Loutfy, R.O. and Hecht, M. (2003). U.S. Patent Number 6,511,766. Low cost molded plastic fuel cell separator plate with conductive elements .
17.
Braun, J.C., Zabriskie Jr, J.E., Neutzler, J.K., Fuchs, M. and Gustafson, R.C. (2001). U.S. Patent Number 6,180,275. Fuel cell collector plate and method of fabrication.
18.
Mehta, V. and Cooper, J.S. (2003). Review and Analysis of PEM Fuel Cell Design and Manufacturing, Journal of Power Sources,114(1): 32—53.
19.
Heiser, J.A. and King, J.A. (2004). Thermally Conductive Carbon Filled Nylon 6,6, PolymerComposites, 25(2): 186—193.
20.
Weber, E.H. , Clingerman, M.L. and King, J.A. (2003). Thermally Conductive Nylon 6,6 and Polycarbonate Based Resins. I. Synergistic Effects of Carbon Fillers, Journal of AppliedPolymer Science , 88(1): 112—122.
Chiou, J.S. and Paul, D.R. (1987). Gas Transport in a Thermotropic Liquid-crystalline Polyester, Journal of Polymer Science Part B: Polymer Physics, 25(8): 1699—1707.
23.
Akzo NobelElectrically Conductive Ketjenblack Product Literature, 300. S. Riverside Plaza, Chicago, IL, 60606 (1999).
24.
AsburyCarbons Product Information , Asbury, NJ, 08802 (2004).
Toho Tenax America, Inc.Fortafil Carbon Fibers Technical Data Sheet, 121 Cardiff Valley Road, Rockwood, TN 37854, USA.
27.
King, J.A., Morrison, F.A., Keith, J.M., Miller, M.G., Smith, R.C., Cruz, M., Neuhalfen, A.M. and Barton, R.L. (2006). Electrical Conductivity and Rheology of Carbon-Filled Liquid Crystal Polymer Composites, Journal of AppliedPolymer Science, 101(4): 2680—2688.
28.
Plastics-standard Atmospheres for Conditioning and Testing. ISO 291:1997 , International Standard Organization, Switzerland (1998).
29.
Evaluating thermal conductivity of gasket materials. ASTM Standard F433—77 (Reapproved 1993), American Society for Testing and Materials , Philadelphia (1996 ).
30.
Gustavsson, M. , Karawacki, E. and Gustafsson, S.E. (1994). Thermal Conductivity, Thermal Diffusivity, and Specific Heat of Thin Samples from Transient Measurements With Hot Disk Sensors, Review of Scientific Instruments,65(12): 3856—3859.
31.
Log, T. and Gustafsson, S.E. (1995). Transient Plane Source Technique for Measuring Thermal Transport Properties of Building Materials , Fire and Materials,19(1): 43—49.
32.
Bohac, V., Gustavsson, M.K., Kubicar, L. and Gustafsson, S.E. (2000). Parameter Estimations for Measurements of Thermal Transport Properties with the Hot Disk Thermal Constants Analyzer, Review of Scientific Instruments,71(6): 2452—2455.
33.
Hot Disk Thermal Constants Analyzer Instruction Manual, Hot Disk AB, Gothenburg, Sweden, ( 2007).
34.
Transient Plane Source Gustafsson Hot Disk Technique, standards for Contact Transient Measurements of Thermal Properties. National Physical Laboratory, United Kingdom, accessed February 2006 at http://www.npl.co.uk/thermal/ctm
35.
He, Y. (2005). Rapid Thermal Conductivity Measurement with a Hot Disk Sensor Part 1. Theoretical Considerations, Thermochimica Acta,436(1): 122—129.
36.
Heiser, J.A. , King, J.A., Konell , J.P., Miskioglu, I. and Sutter, L.L. (2004). Tensile and Impact Properties of Carbon Filled Nylon 6,6 Based Resins, Journal of AppliedPolymer Science, 91(5): 2881—2893.
37.
Konell, J.P. , King, J.A. and Miskioglu , I. (2004). Synergistic Effects of Carbon Fillers on Tensile and Impact Properties in Nylon 6,6 and Polycarbonate Based Resins, Polymer Compsites,25(2): 172—185.
38.
King, J.A., Miller, M.G., Barton, R.L., Keith, J.M., Hauser, R.A., Peterson, K.R. and Sutter, L.L. (2006). Thermal and Electrical Conductivity of Carbon Filled Liquid Crystal Polymercomposties, Journal of AppliedPolymer Science, 99(4): 1552—1558.
39.
Keith, J.M. , King, J.A., Grant , P.W., Cole, A.J., Klett, B.M. and Miskioglu , I. (in press). Tensile Properties of Carbon Filled Liquid Crystal Polymer Composites, Journal of Applied Polymer Science.
40.
Montgomery, D.C. (2001). Design and Analysis of Experiments, 5th edn, John Wiley & Sons, Inc., New York.
