Kenaf fiber (KF) based thermoplastic natural rubber (TPNR) composite was produced by melt blending with polypropylene (PP). Kenaf fiber (15% by volume) and TPNR were mixed in as Haake 600p internal mixer. The fracture behavior of the TPNR matrix and of TPNR—kenaf (with and without maleic anhydride grafted polypropylene, MAPP) composites was evaluated using the essential work of fracture (EWF) method and double edge notched tensile (DENT) specimens. Various ligament lengths were employed ranging from 4 to 12 mm. The strain rate was fixed at 2 mm/min. The specific work of fracture (we) and plastic work (βwp) showed the highest energy for TPNR that corresponds to its ductility and allows the application of the EWF approach. It was found that the presence of kenaf fibers and MAPP reduced the toughness of TPNR and changed the ductile fracture to brittle behavior. SEM observation revealed that energy absorption mechanisms include matrix deformation, fiber pullout, and fiber breakage. Acoustic emission (AE) was employed to analyze the failure processes further. The signals emitted by composites were substantially higher than that of the TPNR matrix, reflecting that also the failure mechanisms were affected by the fibers incorporated.
Sulaiman, C.S. , Ahmad, S.H. and Abdullah, I. (1994). Kajian Adunan Getah Asli/Polietilena Berketumpatan Tinggi Dengan Getah Asli Cecair Sebagai Penserasi, Sains Malaysiana, 23: 29—38.
2.
Nair, K.C.M., Diwan, S.M. and Thomas, S. (1996). Tensile Properties of Short Sisal Fibre Reinforced Polystyrene Composites, J. Appl. Polym. Sci., 60: 1483—1497.
3.
Rowell, R.M. , Sanadi, A., Jacobson, R. and Caulield, D. (1999). Kenaf Properties, Processing and Products, Mississippi State University, Ag. & Bio. Eng., 381—392.
4.
Mai, Y.-W. and Powell, P.J. (1991). Essential Work of Fracture and J-integral Measurements for Ductile Polymers, J. Polym. Sci., Part B, Polym. Phys. , 29(7): 785—793.
5.
Mai, Y.-W., Wong, S.-C. and Chen, X.-H. (1999). Application of Fracture Mechanics for Determination of Toughness of Polymer Blends (chap. 20). Di dalam, In: Paul, D.R. and Bucknall, C.B. (eds), Polymer Blends: Formulations and Performance , Vol. 2, pp. 17—58, Wiley, New York.
6.
Mai, Y.-W., Wong, S.C. and Chen, X.H. (2000). Application of Fracture Mechanics for Characterization of Toughness of Polymer Blends in Polymer Blends, In: Paul, D.R. and Bucknall C.B. (eds), Performance, Wiley, New York.
7.
Moore, D.R., Pavan, A. and Williams, J.G. (2001). Fracture Mechanics Testing Methods for Polymers, Adhesives and Composites, ESIS Publication 28. Elsevier , Netherlands.
8.
Gong, G., Xie, B.-H., Yang, W., Li, Z.-M., Zhang, W.-Q. and Yang, M.-B. (2005). Essential Work of Fracture (EWF) Analysis for Polypropylene Grafted with Maleic Anhydride Modified Polypropylene/Calcium Carbonate Composites, Polym. Testing, 24: 410—417.
9.
Mouzakis, D.E. , Gahleitner, M. and Karger-Kocsis , J. (1998). Toughness Assessment of Elastomeric Polypropylene (ELPP) by the Essential Work of the Fracture Method, J. Appl. Polym. Sci., 70: 873—881.
10.
Karger-Kocsis, J., Czigany, T. and Moskala, E.J. (1997). Thickness Dependence of Work of Fracture Parameters of an Amorphous Copolyester, Polymer, 38: 4587—4593.
11.
Maspoch, M.L.I. , Games-Perez, J. and Karger-Kocsis , J.Effects of Thickness, Deformation Rate and Energy Partitioning on the Work of Fracture Parameters of uPVC Films, Polym. Bull., 50: 279—286.
12.
Karger-Kocsis, J. and Czigany, T. (2000). Strain Rate Dependence of the Work of Fracture Response of an Amorphous Poly(ethylene-naphthalate) (PEN) Film, Polym. Eng. and Sci., 40(8): 1809—1815.
13.
Karger-Kocsis, J., Czigany, T. and Moskala, E.J. (1998). Deformation Rate Dependence of the Essential and Non-essential Work of Fracture Parameters in an Amorphous Copolyester, Polymer, 39(17): 3939—3944.
14.
Wu, J.-S. , Mai, Y.-W. and Cotterell , B. (1993). J. Mater. Sci., 28(12): 3373—3384.
15.
Ferrer-Balas, D., Maspoch, M.L.I., Martinez, E. Ching, Li, R.K.Y. and Mai, Y.-W. (2001). Influence of Annealing on the Microstructural, Tensile and Fracture Properties of Polypropylene Films , Polym., 42(6): 2665—2674.
16.
Yamakawa, R.S. , Razzino, C.A., Correa, C.A. and Hage Jr., E. (2004). Influence of Notching and Moulding Conditions on Determination of EWF Parameters in Polyamide 6, Polymer Testing,23: 195—202.
17.
Karger-Kocsis, J., Barany, T. and Moskala, E.J. (2003). Plane Stress Fracture Toughness of Physically Aged Plasticized PETG as Assessed by the Essential Work of Fracture (EWF) Method, Polymer, 44: 5691—5699.
18.
Fayolle, B., Tcharkhtchi, A. and Verdu, J. (2004). Temperature and Molecular Weight Dependence of Fracture Behaviour of Polypropylene Films, Polym. Testing , 23: 939—947.
19.
Karger-Kocsis, J. and Moskala, E.J. (2000). Molecular Dependence of the Essential and Non-essential Work of Fracture of Amorphous Films of Poly(ethylene-2,6-napthalate) (PEN), Polymer, 41: 6301—6310.
20.
Czigany, T., Marosfalvi, J. and Karger-Kocsis, J. (2000). An Acoustic Emission Study of the Temperature-dependent Fracture Behavior of Polypropylene Composites Reinforced by Continuous and Discontinuous Fiber Mats, Compos. Sci. & Technol., 60: 1203—1212.
21.
Abdullah, I. and dan Zakaria, Z. (1989). Pendepolimeran Fotokimia Getah Asli, Sains Malaysiana, 18(2): 99—109.
22.
Mai, Y.W. and Cotterell, B. (1986). On the Essential Work of Ductile Fracture in Polymers , Int. J. Fract., 32(2): 105—125.
23.
Wu, J.S. and Mai, Y.-W. (1996). The Essential Fracture Work Concept for Toughness Measurement of Ductile Polymers, Polym. Engr. Sci., 36(18): 2275—2288.
24.
Tjong, S.C. , Xu, S.-A., Li, R.K.-Y. and Mai, Y.-W. (2002). Mechanical Behavior and Fracture Toughness Evaluation of Maleic Anhydride Compatibilized Short Glass Fiber/SEBS/ Polypropylene Hybrid Composites, Compos. Sci. & Technol., 62: 831—840.
25.
Li, W.D. , Li, R.K.Y. and Tjong, S.C. (1997). Fracture Toughness of Elastomer-modified Polypropylene, Polym. Testing, 16: 563—574.
26.
Tjong, S.C. , Xu, S.-A., Li, R.K.-Y. and Mai, Y.-W. (2002). Short Glass Fiber-reinforced Polyamide 6,6 Composites Toughened with Maleated SEBS, Compos. Sci. & Technol., 62: 2017—2027.
27.
Czigany, T. (2005). Special Manufacturing and Characteristics of Basalt Fiber Reinforced Hybrid Polypropylene Composites: Mechanical Properties and Acoustic Emission Study, Compos. Sci. & Technol., 66(16): 3210—3220.
28.
Dogossy, G. and Czigany, T. (2006). Failure Mode Characterization in Maize Hull Filled Polyethylene Composites by Acoustic Emission, Polym. Testing, 25: 353—357.
29.
Kishi, H., Yoshioka, M., Yamanoi, A. and Shiraishi, N. (1988). Composites of Wood and Polypropylenes I, Mokuzai Gakkaishi, 34(2): 133—139.
