Global measurements from low-velocity impact experiments and local strain measurements from embedded and surface mounted optical fiber Bragg grating (FBG) sensors were used to obtain failure maps for two- and three dimensional woven composites. These maps delineated five distinct regimes spanning behavior from initial impact to complete penetration. Sensor and host damage were separated by signal intensity and the evolution of Bragg peaks due to repeated impact loads. The results indicate that a local-global framework can be used to monitor damage progression in different host materials, and hence it can be potentially used to mitigate damage.
Feraboli, P. and Masini, A. (2004). Development of Carbon/Epoxy Structural Components for a High Performance Vehicle, Composites Part B: Applied Science and Manufacturing, 35: 323—330.
2.
Baucom, J.N. and Zikry, M.A. (2003). Evolution of Failure Mechanisms in 2D and 3D Woven Composite Systems Under Quasi-Static Perforation, Journal ofComposite Materials, 37(18): 1651—1674.
3.
Flanagan, M.P. , Zikry, M.A., Wall, J.W. and El-Sheikh , A. (1999). An Experimental Investigation of High Velocity Impact and Penetration Failure Modes in Textile Composites, Journal ofComposite Materials , 33(12): 1080—1103.
Melotik, D.J. , Czaplicki, M., Whalen, T.J. and Day, D.R. (1993). Analysis of the Resin Transfer Molding Process Using in-mold Dielectric Sensors, Thermochimica Acta, 217: 251—262.
6.
Idriss, R.L., Kodindouma, M.B., Kersey, A.D. and Davis M.A. (1998). Multiplexed Bragg Grating Optical Fiber Sensors for Damage Evaluation in Highway Bridges, Smart Materials and Structures, 7(2): 209—216.
7.
Shah Khan, M.Z. and Grabovac, I. (2000). Repair of Damage to Marine Sandwich Structures: Part II—Fatigue Testing. DSTO-TN-0275, Melbourne , Australia: Defence Science and Technology Organisation (DSTO), Aeronautical and Maritime Research Laboratory Corporate Reports, pp. 1—6.
8.
Tien-Wei, S. and Yu-Hao, P. (2003). Impact Resistance and Damage Characteristics of Composite Laminates, Composite Structures, 62: 193—203.
9.
Güemes, J.A., Menendez, J.M., Frövel, M., Fernandez, I. and Pintado J.M. (2001). Experimental Analysis of Buckling in Aircraft Skin Panels by Fibre Optic Sensors, Smart Materials and Structures , 10(3): 490—496.
10.
Kumar, K.S. and Bhat, T.B. (1998). Response of Composite Laminates on Impact of High Velocity Projectiles, Key Engineering Materials, 141—143: 337—348.
11.
Bosia, F., Giaccari, P., Botsis J., Facchini, M., Limberger, H.G. and Salathe', R.P. (2003). Characterization of the Response of Fibre Bragg Grating Sensors Subjected to a Two-Dimensional Strain Field, Smart Materials and Structures, 12: 925—934.
12.
Murukeshan, V.M., Chan, P.Y., Ong, L.S. and Seah, L.K. (2000). Cure Monitoring of Smart Composites Using Fiber Bragg Grating Based Embedded Sensors, Sensors and Actuators A: Physical, 79(2): 153—161.
13.
Leng, J.S. and Asundi, A. (2002). Real-Time Cure Monitoring of Smart Composite Materials Using Extrinsic Fabry-Perot Interferometer and Fiber Bragg Grating Sensors , Smart Materials and Structures, 11(2): 249—255.
14.
Doyle, C., Martin, A., Liu, T., Wu, M., Hayes, S., Crosby, P.A., Powell, G.R., Brooks, D. and Fernando, G.F. (1998). In-situ Process and Condition Monitoring of Advanced Fiber-Reinforced Composite Materials Using Optical Fibre Sensors, Smart Materials and Structures, 7(2): 145—158.
15.
Kuang, K.S.C. , Kenny, R., Whelan, M.P., Cantwell, W.J. and Chalker, P.R. (2001). Residual Strain Measurements and Impact Response of Optical Fibre Bragg Grating Sensors in Fibre Metal Laminates, Smart Materials and Structures, 10: 338—346.
16.
Waele, W. De, Degrieck, J., Moerman, W., Taerwe, L. and Baets, P. De (2003). Feasibility of Integrated Optical Fibre Sensors for Condition Monitoring of Composite Structures Part 1: Comparison of Bragg-Sensors and Strain Gauges, INSIGHT—Non-Destructive Testing and Condition Monitoring, 45(4): 266—271.
17.
Yang, B., Tao, X.M., Yu, J. and Ho, H.L. (2004). Compression Force Measured by Fiber Optic Smart Cellular Textile Composites, Textiles Research Journal, 74(4): 305—313.
18.
Takeda, S., Minakuchi, S., Okabe, Y. and Takeda, N. (2005). Delamination Monitoring of Laminated Composites Subjected to Low-Velocity Impact Using Small Diameter FBG Sensors, Smart Materials and Structures, 9(3): 310—315.
19.
Bayandor, J. , Thomson, R.S., Scott M.L., Nquyen M.Q. and Elder D.J. (2003). Investigation of Impact and Damage Tolerance in Advanced Aerospace Composite Structures, International Journal of Crashworthiness, 8(3): 297—306.
20.
Baucom, J.N. and Zikry, M.A. (2005). Low-Velocity Impact Damage Progression in Woven E-Glass Composite Systems, Journal of Composites Part A-Applied Science and Manufacturing, 36(5): 658—664.
21.
Davies, G.A.O. and Zhang, X. (1994). Impact Damage Prediction in Carbon Composite Structures, International Journal of Impact Engineering, 16(1): 149—170.
22.
Peters, K., Studer, M., Botsis, J., Iocco, A., Limberger, H. and Salathe', R. (2001). Embedded Optical Fiber Bragg Grating Sensors in a Nonuniform Strain Field: Measurements and Simulations, Experimental Mechanics, 41(1): 19—28.
23.
Belingardi, G. and Vadori, R. (2002). Low Velocity Impact Tests of Laminates Glass-Fiber-Epoxy Matrix Composite Material Plates, International Journal of Impact Engineering, 27: 213—229.
24.
Kang, Ki-Weon and Kim, Jung-Kyu. (2004). Fatigue Life Prediction of Impacted Carbon/ Epoxy Laminates Under Constant Amplitude Loading, Composites Part A: Applied Science and Manufacturing, 35: 529—535.
25.
Zhang, A.P., Tao, X.M. and Tam H.Y. (2003). Effects of Microstructure of Smart Fiber Composites on Embedded Fiber Bragg Grating Sensors, Journal of Reinforced Plastics and Composites, 22(14): 1319—1329.
26.
Wagreich, R.B. , Atia, W.A., Singh, H. and Sirkis J.S. (1996). Effects of Diametric Load on Fibre Bragg Gratings Fabricated in Low Birefringent Fibre, Electronics Letters, 32(13): 1223—1224.
27.
Matos, C.J.S. de, Torres, P., Valente, L.C.G., Margulis, W. and Stubbe, R. (2001). Fiber Bragg Grating (FBG) Characterization and Shaping by Local Pressure, Journal of Lightwave Technology, 19(8): 1206—1211.
