Wear Behavior of Functionalized Multi-walled Carbon Nanotube Reinforced Epoxy Matrix Composites

Abstract

This article studies the tribological behavior of functionalized multi-walled carbon nanotubes (MWNTs) reinforced epoxy matrix composites. MWNTs reinforced epoxy composites are fabricated by an injection molding process. The effects on the tribological properties of different loading concentrations and different functional groups of MWNTs are investigated by using a linear reciprocal wear tester. As increasing the concentration of MWNTs reduces wear loss, better tribological property was attained on functionalized MWNTs than as-produced MWNTs. The changes in worn surface morphology are observed in order to investigate the wear behavior. The MWNTs in the epoxy matrix near the surface are exposed and became a lubricating working film on the worn surface. The dispersion and interfacial bonding of MWNTs in the epoxy matrix are investigated from the fracture surface. The existence of MWNT at the wear surface is verified by a Raman spectrometer.

Keywords

surface modification multi-walled carbon nanotubes (MWNTs)tribological property functionalization

Get full access to this article

View all access options for this article.

References

Thostenson, E. T. and Chou, T. W. (2003). On the Elastic Properties of Carbon Nanotube-based Composite: Modeling and Characterization , Journal Physics D: Applied Physics, 36(5): 573-582 .

Yu, M. , Lourie, O. , Dyer, M. J. , Moloni, K. , Kelly, T. F. and Ruoff, R. S. (2000). Strength and Breaking Mechanism of Multiwalled Nanotubes under Tensile Load , Science, 287(5453): 637-640 .

Wang, Y. , Wu, J. and Wei, F. (2003). A Treatment Method to give Separated Multi-walled Carbon Nanotubes with High Purity, High Crystallization and Large Aspect Ratio , Carbon, 41(15): 2939-2948 .

Frankland, S. J. V. , Caglar, A. , Brenner, D. W. and Gabriel, M. (2002). Molecular Simulation of the Influence of Chemical Cross-links on the Shear Strength of Carbon Nanotubes-polymer Interfaces , Journal of Physical Chemistry B., 106(12): 3046-3049 .

Hirsh, A. (2002). Functionalization of Single-walled Carbon Nanotubes , Angrew Chem. Int. Ed., 41(11): 1853-1859 .

Allaoui, A. , Bai, S. , Cheng, H. M. and Bai, J. B. (2002). Mechanical and Electrical Properties of MWNT/Epoxy Composite , Composites Science and Technology, 62(15): 1993-1998 .

Lim, D.-S. , An, J.-W. and Lee, H. J. (2002). Effects of Carbon Nanotube Addition on the Tribological Behavior of Carbon/Carbon Composites , Wear, 252(5-6): 512-517 .

Cai, H. , Yan, F. and Xue, Q. (2004). Investigation of Tribological Properties of Polyimide/Carbon Nanotube Nanocomposites , Material Science and Engineering A, 364(1-2): 94-100 .

Yang, Zhi , Dong, Bin , Huang, Yi , Liu, Liang , Yan, Feng-Yuan and Li, Hu-Lin (2005). A Study on Carbon Nanotubes Reinforced Poly(Methyl Methacrylate) Nanocomposites , Materials Letters, 59(17): 2128-2132 .

10.

Chen, J. , Hamon, M. A. , Hu, H. , Chen, Y. , Rao, A. M. , Eklund, P. C. and Haddon, R. C. (1998). Solution Properties of Single-walled Carbon Nanotubes , Science, 282(5386): 95-98 .

11.

Rao, A. M. , Richer, E. , Bandow, S. , Chase, B. , Eklund, P. C. , Wlilliams, K. A. , Fang, S. , Suibbaswamy, K. R. , Menon, M. , Thess, A. , Smally, R. E. and Dresselhaus, G. (1997). Diameter-selective Raman Scattering from Vibrational Modes in Carbon Nanotubes , Science, 275(5279): 187-191 .