The high-strain-rate compressive behavior of an epoxy syntactic foam is examined in this study. A pulse-shaped split Hopkinson pressure bar (SHPB), modified for low-impedance material testing, was used to ensure that the samples deformed under dynamic equilibrium and at a nearly constant strain-rate. Dynamic stress equilibrium in the specimen was monitored for each experiment using piezoelectric force transducers mounted close to the specimen end-faces. Quasi-static experiments were also conducted to demonstrate rate effects of the foam, as well as to study its failure behavior. It was determined that the compressive strength of the foam increased with strain rate up to a transition strain rate of between 550 and 1030 s 1. For experiments conducted at strain rates above this transition range, strain-rate-induced damage caused the compressive strength of the foam to decrease. Based on the experimental results, a constitutive model with strain-rate and damage effects was developed, which described the test data well.
3. Shutov, F.A. (1991). Syntactic Polymer Foams, In: Klempner, D. and Frisch, K.C. (eds.), Handbook of Polymeric Foams and Foam Technology, pp. 355–374, Hanser Publishers, New York.
4.
4. Gupta, N., Kishore, Woldesenbet E. and Sankaran, S. (2001). Studies on Compressive Failure Features in Syntactic Foam Material, Journal of Materials Science, 36: 4485–4491.
5.
5. Young, K.S. (April 1985). Value-Adding Syntactic Foams Gain in Composites Applications, Modern Plastics, 92–97.
6.
6. Ansermet, J.PH. and Baeriswyl, E. (1994). Dielectric Study of Hollow Microsphere Composites, Journal of Materials Science, 29: 2841–2846.
7.
7. Kim, H.S. and Oh, H.H. (2000). Manufacturing and Impact Behavior of Syntactic Foam, Journal of Applied Polymer Science, 76: 1324–1328.
8.
8. Harruff, P.W. and Sandman, B.E. (1983). Carbon/Epoxy Composite Structures for Underwater Pressure Hull Applications, The 28th National SAMPE Symposium and Exhibition, pp. 40–49, Society for the Advancement of Material and Process Engineering, April 12–14, Anaheim, CA.
9.
9. Hiel, C., Dittman, D. and Ishai, O. (1993). Composite Sandwich Construction with Syntactic Foam Core: A Practical Assessment of Post-Impact Damage and Residual Strength, Composites, 24: 447–450.
10.
10. Ishai, O. and Hiel, C. (1992). Damage Tolerance of a Composite Sandwich with Interleaved Foam Core, Journal of Composites Technology & Research, 14: 155–168.
11.
11. Smiley, L.H. (1986). Hollow Microspheres: More Than Just Fillers, Materials Engineering, 103: 27–30.
12.
12. Jackson, D. and Clay, P. (September 1983). Syntactic Foam Sphere Improves Oceanographic Mooring Performance, Sea Technology, 24–29.
13.
13. Rizzi, E., Papa, E. and Corigliano, A. (2000). Mechanical Behavior of A Syntactic Foam: Experiments and Modeling, International Journal of Solids and Structures, 37: 5773–5794.
14.
14. Corigliano, A., Rizzi, E. and Papa, E. (2000). Experimental Characterization and Numerical Simulations of a Syntactic-Foam/Glass-Fibre Composite Sandwich, Composites Science and Technology, 60: 2169–2180.
15.
15. Huang, J.S. and Gibson, L.J. (1993). Elastic Moduli of A Composite of Hollowspheres in A Matrix, Journal of the Mechanics and Physics of Solids, 41: 55–75.
16.
16. Bunn, P. and Mottram, J.T. (1993). Manufacture and Compression Properties of Syntactic Foams, Composites, 24: 565–571.
17.
17. Narkis, M., Puterman, M. and Kenig, S. (1980). Syntactic Foams II. Preparation and Characterization of Three-Phase Systems, Journal of Cellular Plastics, 16: 326–330.
18.
18. Palumbo, M. and Tempesti, E. (1998). On the Nodular Morphology and Mechanical Behavior of A Syntactic Foam Cured in Thermal and Microwave Fields, Acta Polymer, 49: 482–486.
19.
19. Gupta, N., Woldesenbet, E. and Kishore (2002). Compressive Fracture Features of Syntactic Foams – Microscopic Examination, Journal of Materials Science, 37: 3199–3209.
20.
20. Cohen, A., Yalvac, S. and Wetters, D.G. (1992). Impact Fatigue Behavior of A Syntactic Composite Material, The 37th International SAMPE Symposium and Exhibition, March 9–12, pp. 641–653, Society for the Advancement of Material and Process Engineering, Anaheim, CA.
21.
21. Kolsky, H. (1949). An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading, In: Proceedings of the Royal Society of London, B62: 676–700.
22.
22. Chen, W., Song, B., Frew, D.J. and Forrestal, M.J. (2003). Dynamic Small Strain Measurements of a Metal Specimen with a Split Hopkinson Pressure Bar, Experimental Mechanics, 43: 20–23.
23.
23. Chen, W., Wu, Q., Kang, J.H. and Winfree, N.A. (2001). Compressive Superelastic Behavior of a NiTi Shape Memory Alloy at Strain Rates of 0.001 to 750 s 1, International Journal of Solids and Structures, 38: 8989–8998.
24.
24. Chen, W. and Ravichandran, G. (1996). Static and Dynamic Compressive Behavior of Aluminum Nitride under Moderate Confinement, Journal of the American Ceramic Society, 79: 579–584.
25.
25. Song, B., Chen, W. and Weerasooriya, T. (2003). Quasi-Static and Dynamic Compressive Behaviors of a S-2 Glass/SC15 Composite, Journal of Composite Materials, 37: 1723–1743.
26.
26. Song, B. and Chen, W. (2003) Dynamic Compressive Constitutive Behavior of EPDM Rubber, Transactions of the ASME, Journal of Engineering Materials and Technology, 125: 294–301.
27.
27. Chen, W., Lu, F. and Winfree, N. (2002). High-Strain-Rate Compressive Behavior of a Rigid Polyurethane Foam with Various Densities, Experimental Mechanics, 42: 65–73.
28.
28. Gray, G.T. (2000). Classic Split-Hopkinson Pressure Bar Testing, Mechanical Testing and Evaluation, Metals Handbook, 8: 462–476, American Society for Metals, Materials Park, OH.
29.
29. Song, B., Chen, W., Dou, S. and Winfree, N.A.Effects of Strain Rate on Elastic and Early Cell-Collapse Responses of a Polystyrene Foam, International Journal of Impact Engineering (revised).
30.
30. Frew, D.J., Forrestal, M.J. and Chen, W. (2002). Pulse Shaping Techniques for Testing Brittle Materials with a Split Hopkinson Pressure Bar, Experimental Mechanics, 42: 93–106.
31.
31. Song, B. and Chen, W.Dynamic Stress Equilibrium on a Rubber Specimen during a Split Hopkinson Pressure Bar Experiment, Experimental Mechanics (to appear).
32.
32. Jones, F.R. (1990). Micromechanics and Properties of Fibre Composites, In: Middleton, D.H. (ed.), Composite Materials in Aircraft Structures, pp. 69–92, Longman Scientific & Technical Publishers, New York.
33.
33. Chen, W., Lu, F. and Zhou, B. (2000). A Quartz Crystal Embedded Split Hopkinson Bar for Soft Materials, Experimental Mechanics, 40: 1–6.
34.
34. Chen, W., Lu, F., Frew, F.J. and Forrestal, M.J. (2001). Dynamic Compression Testing of Soft Materials, Transactions of the ASME, Journal of Applied Mechanics, 69: 214–223.
35.
35. Dighe, M.D., Gokhale, A.M., Horstemeyer, M.F. and Mosher, D.A. (2000). Effect of Strain Rate on Damage Evolution in a Cast Al-Si-Mg Base Alloy, Metallurgical and Materials Transactions A, 31A: 1725–1731.
36.
36. Hodowany, J., Ravichandran, G., Rosakis, A. J. and Rosakis, P. (2000). Partition of Plastic Work into Heat and Stored Energy in Metals, Experimental Mechanics, 40: 113–123.
37.
37. Randles, P.W. and Nemes, J.A. (1992). A Continuum Damage Model for Thick Composite Materials Subjected to High-Rate Dynamic Loading, Mechanics of Materials, 13: 1–13.
38.
38. Park, S.W. and Schapery (1997). A Viscoelastic Constitutive Model for Particulate Composites with Growing Damage, International Journal of Solids and Structures, 34: 931–947.
39.
39. Knauss, W.G. (1973). The Mechanics of Polymer Fracture, Applied Mechanics Reviews, 26: 1–17.
40.
40. Kander, R.G. and Siegmann, A. (1992). The Effect of Strain Rate on Damage Mechanisms in a Glass/Polypropylene Composite, Journal of Composite Materials, 26: 1455–1473.
41.
41. Gazonas, G.A. (1993). A Uniaxial Nonlinear Viscoelastic Constitutive Model with Damage for M30 Gun Propellant, Mechanics of Materials, 15: 323–335.
42.
42. Bonora, N. and Milella, P.P. (2001). Constitutive Modeling for Ductile Metals Behavior Incorporating Strain Rates, Temperature and Damage Mechanics, International Journal of Impact Engineering, 26: 53–64.
43.
43. Wang, L. and Yang, L. (1992). Nonlinear Viscoelastic Constitutive Relationship for Solid Polymers, In: Wang, L., Yu, T. and Li, Y. (eds), Advances in Impact Dynamics, pp. 88–116, The University of Science and Technology of China Publications, Hefei, China.
44.
44. Li, Y., Ramesh, K.T. and Chin, E.S.C. (2000). Viscoplastic Deformations and Compressive Damage in an A359/SiCp Metal-Matrix Composite, Acta Materialia, 48: 1563–1573.
45.
45. Cervera, M., Oliver, J. and Manzoli, O. (1996). A Rate-Dependent Isotropic Damage Model for the Seismic Analysis of Concrete Dams, Earthquake Engineering and Structural Dynamics, 25: 987–1010.
