Finite Element Analysis of Diaphragm-type Air Springs with Fiber-reinforced Rubber Composites

Abstract

This paper is concerned with deformation analysis of diaphragm-type air springs, especially an air bag which consists of nylon fiber-reinforced rubber, composite rubber linings and steel wire bead parts. The analysis has been carried out with a finite element code developed to consider the orthotropic properties of fiber-reinforced rubber lamina, geometric nonlinearity by large deformation, and contact between an air bag and a bead ring.

Five different models have been considered in the design optimization procedure in order to investigate the effect of design variables with the variation of the cord angle of an air bag. The analysis provides the hoop and the longitudinal strain distributions in an air bag as well as the variation of the outer diameter, the fold height and the vertical force with respect to the internal pressure.

Get full access to this article

View all access options for this article.

References

1. Morton, J.E. (1987). Rubber Technology, Van Nostrand Reinhold, New York .

2. Gent, A.N. and Thomas, A.G. (1974). Rubber Chemistry and Technology, 47: 384-395 .

3. Agnew, B. (1991). Proc. Institution of Mechanical Engineers, 205: 207-209 .

4. Boros, A., Kovacs, F. and Lengyel, K. (1991). International Rubber Conference (IKT/IRC 91), 487-489 .

5. Maßmann, C. (1995). Kautschuk Gummi Kunststoffe, 48: 423-429 .

6. Hibbitt, Karlsson & Sorensen Inc. (1996). ABAQUS/Standard Manual.

7. Tsai, S.W. and Hahn, H.T. (1980). Introduction to Composite Materials, Technomic Publishing Co., Inc., Westport, Connecticut, USA .

8. Gibson, R.F. (1994). Principles of Composite Material Mechanics, McGraw-Hill, New York .

9. McMeeking, R.M. and Rice, J.R. (1975). Int. J. Solids Struct., 11: 601-616 .

10.

10. Huh, H. and Kwak, Y.K. (1990). Comput. Struct., 36(5): 871-881 .

11.

11. Cheng, J.H. and Kikuchi, N. (1985). Comput. Methods Appl. Mech. Engrg, 49: 71-108 .

12.

12. Kim, S.H., Lee, H.W., Huh, H., Lee, J.H. and Oh, S.T. (1998). Trans. of KSAE, in Korean, 6(3): 123-137 .

13.

13. Bathe, K.J. and Chaudhary, A. (1985), Int. J. Numer. Meth. Engng, 21: 65-88 .

14.

14. Lee, H.W., Kim, S.H., Lee, C.H., Huh, H., Lee, J.H. and Oh, S.T. (1997). Trans. of KSME, in Korean, 21(12): 2121-2133 .

15.

15. Hughes, T.J.R. (1983). Int. J. Numer. Meth. Engng, 15: 1413-1418 .

16.

16. Mark, J.E., Erman, B. and Eirich, F.R. (1994). Science and Technology of Rubber, Academic Press, San Diego, USA .

17.

17. Reddy, J.N. (1992). Energy and Variational Methods in Applied Mechanics, John Wiley & Sons, New York .