A novel lab-scale batch foaming equipment: The mini-batch

Abstract

In this paper, we report the design of a new experimental apparatus for the study of the foaming process of thermoplastic polymers with physical blowing agents. The novel lab-scale batch foaming equipment is capable of achieving accurate control of the processing variables, namely, the temperature, the saturation pressure and the pressure drop rate and, furthermore, of allowing the achievement of very high pressure drop rates, the observation of the sample while foaming and the very fast extraction of the foamed sample. By recalling the considerations discussed by Muratani et al. (J Cell Plast 2005; 24: 15), the design converged into a simple, cheap, and very small pressure vessel, thereby denoted as mini-batch. We herein describe the overall design path of the mini-batch, its characteristics, configurations, together with some examples of use with polystyrene and CO₂ as the blowing agent.

Keywords

Batch foaming pressure vessel pressure drop rate view cell mini-batch

Get full access to this article

View all access options for this article.

References

Colton

Suh

. The nucleation of microcellular thermoplastic foam with additives: Part I: theoretical considerations. Polym Eng Sci 1987; 27: 485–492.

Colton

Suh

. The nucleation of microcellular thermoplastic foam: process model and experimental results. Mater Manuf Process 1986; 1: 341–364.

Marrazzo

Di Maio

Iannace

. Conventional and nanometric nucleating agents in poly (ɛ-caprolactone) foaming: crystals vs. bubbles nucleation. Polym Eng Sci 2008; 44: 336–344.

Marrazzo

Di Maio

Iannace

. Foaming of synthetic and natural biodegradable polymers. J Cell Plast 2007; 43: 123–133.

Doroudiani

Kortschot

. Polystyrene foams. II. Structure–impact properties relationships. J Appl Polym Sci 2003; 90: 1421–1426.

Park

Baldwin

Suh

. Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymers. Polym Eng Sci 1995; 10: 432–440.

Han

Koelling

Tomasko

. Extrusion of polystyrene nanocomposite foams with supercritical CO₂. Polym Eng Sci 2002; 42: 1261–1275.

Park

Popiliev

. Effects of die geometry on cell nucleation of PS foams blown with CO₂. Polym Eng Sci 2003; 7: 1378–1390.

Leung

Wong

Park

. Role of processing temperature in polystyrene and polycarbonate foaming with carbon dioxide. Ind Eng Chem 2009; 48: 7107–7116.

10.

Sorrentino

Di Maio

Iannace

. Poly(ethyleneterephthalate) foams: correlation between the polymer properties and the foaming process. J Appl Polym Sci 2010; 116: 27–35.

11.

Marrazzo

Di Maio

Iannace

. Process-structure relationships in PCL foaming. J Cell Plast 2008; 44: 37–52.

12.

Muratani

Shimbo

Miyano

. Correlation of decompression time and foaming temperature on the cell density of foamed polystyrene. Cell Polym 2005; 24: 15–27.

13.

Doroudiani

Kortschot

. Polystyrene foams. I. Processing-structure relationships. J Appl Polym Sci 2003; 90: 1412–1420.

14.

Guo

Wang

Park

. A microcellular foaming simulation system with a high-pressure drop rate. Ind Eng Chem Res 2006; 45: 6153–6161.

15.

Chen

Sheth

Wang

. Effects of shear stress and pressure drop rate on microcellular foaming process. J Cell Plast 2001; 37: 353–363.

16.

Salerno

Di Maio

Iannace

. Solid-state supercritical CO₂ foaming of PCL and PCL-HA nano-composite: effect of composition, thermal history and foaming process on foam pore structure. J Supercrit Fluids 2011; 58: 158–167.