To investigate the effect of clay particles on the cell morphology of HDPE-clay nanocomposite foams, research on the batch foaming process of HDPE-clay nanocomposites using supercritical CO2 is conducted. This study demonstrates that in comparison with pure HDPE, nanocomposites produce much finer and more uniform cell structures. Additionally, an attempt to produce a nanocellular structure is successfully performed using HDPE-clay nanocomposites.
Baldwin, D. F. and Suh, N. P. (1992). Microcellular Poly(ethylene terephthalate) and Crystallizable Poly(ethylene terephthalate): Characterization of Process Variables , SPE ANTEC Tech. Papers, 38: 1503 .
2.
Collias, D. I. , Baird, D. G. and Borggreve, R. J.M. (1994). Impact Toughening of Polycarbonate by Microcellular Foaming , Polymer, 35(18): 3978 .
3.
Collias, D. I. and Baird, D. G. (1995). Tensile Toughness of Microcellular Foams of Polystyrene, Styrene-Acrylonitrile Copolymer, and Polycarbonate, and the Effect of Dissolved Gas on the Tensile Toughness of the Same Polymer Matrices and Microcellular Foams , Polym. Eng. Sci., 35(14): 1167 .
4.
Lee, C. , Sheth, S. H. and Kim, R. (2001). Gas Absorption with Filled Polymer Systems , Polym. Eng. Sci., 41(6): 990 .
5.
Ramesh, N. S. , Rasmussen, D. H. and Campbell, G. A. (2001). The Heterogeneous Nucleation of Microcellular Foams Assisted by the Survival of Microvoids in Polymers Containing Low Glass Transition Particles. Part I: Mathematical Modeling and Numerical Simulation , Polym. Eng. Sci., 34(22): 1685 .
6.
Ramesh, N. S. , Rasmussen, D. H. and Campbell, G. A. (2001). The Heterogeneous Nucleation of Microcellular Foams Assisted by the Survival of Microvoids in Polymers Containing Low Glass Transition Particles. Part II: Experimental Results and Discussion , Polym. Eng. Sci., 34(22): 1698 .
7.
Giannelis, E. P. (1996). Polymer Layered Silicate Nanocomposites , Adv. Mater., 8(1): 29 .
8.
Krishnamoorti, E. , Vaia, R. A. and Giannelis, E. P. (1996). Structure and Dynamics of Polymer-Layered Silicate Nanocomposites , Chem. Mater., 8(8): 1718 .
9.
Kojima, Y. , Usuki, A. , Kawasumi, M. , Okada, A. , Fukushima, Y. , Kurauchi, T. and Kamigaito, O. (1993). Mechanical Properties of Nylon 6-Clay Hybrid , J. Mater. Res., 8(5): 1185 .
10.
Wang, K. H. , Chung, I. J. , Jang, M.C. , Keum, J.K. and Song, H.H. (2002). Deformation Behavior of Polyethylene-Silicate Nanocomposites as Studied by Real-Time Wide Angle X-ray Scattering , Macromolecules, 35(14): 5529 .
11.
Wang, K.H. , Xu, M. , Choi, Y.S. and Chung, I.J. (2001). Effect of Aspect Ratio of Clay on Melt Extensional Process of Maleated Polyethylene-Clay Nanocomposites , Polymer Bulletin, 46: 499 .
12.
Han, X. , Zeng, C. , Lee, L. J. , Tomasko, D. L. and Koelling, K. W. (2002). Polymer Nanocomposite Foams by Using Supercritical CO2, PPS-18, PO23.
13.
Han, X. , Zeng, C. , Lee, L. J. , Tomasko, D. L. and Koelling, K. W. (2002). Processing and Cell Structure of Nano-Clay Modified Microcellular Foams, SPE ANTEC Tech. Papers, 1915.
14.
Wingert, M. J. , Han, X. , Zeng, C. , Li, H. , Lee, L. J. , Tomasko, D. L. and Koelling, K. W. (2003). Rheological Changes in CO2 Impregnated Polystyrene Reinforced with Nanoclays, SPE ANTEC Tech. Papers, 986.
15.
Yuan, M., Turng, L.S., Spindler, R., Caulfield, D. and Hunt, C. (2003). SPE ANTEC Tech. Papers, 691.
16.
Wunderlich, B. and Czornyj, G. (1977). A Study of Equilibrium Melting of Polyethylene , Macromolecules, 10(5): 906 .
17.
Kleinrahm, R. and Wagner, W. (1986). Measurement and Correlation of the Equilibrium Liquid and Vapor Densities and the Vapor-Pressure along the Coexistence Curve of Methane , J. Chem. Thermodynamics, 18(8): 739 .
18.
Doroudiani, S. , Park, C. B. and Kortschot, M. T. (1996). Effect of the Crystallinity and Morphology on the Microcellular Foam Structure of Semicrystalline Polymers , Polym. Eng. Sci., 36(21): 2645 .
19.
Vaia, R. A. and Giannelis, E. (1997). Polymer Melt Intercalation in Organically-Modified Layered Silicate: Model Predictions and Experiment , Macromolecules, 30(25): 8000 .
20.
Hasegawa, N. , Kawasumi, M. , Kato, M. , Usuki, A. and Okada, A. (1998). Preparation and Mechanical Properties of Polypropylene-Clay Hybrids Using a Maleic Anhydride-Modified Polypropylene Oligmer , J. Appl. Polym. Sci., 67(1): 87 .
21.
Ren, J. A. , Silva, S. and Krishnamoorti, R. (2000). Linear Viscoelasticity of Disordered Polystyrene-Polyisoprene Block Copolymer Based Layered-Silicate Nanocomposites , Macromolecules, 39(10): 3979 .
22.
Lee, K. M. and Han, C. D. (2003). Linear Dynamic Viscoelastic Properties of Functionalized Block Copolymer-Organoclay Nanocomposites , Macromolecules, 36(3): 804 .
23.
Lee, K. M. and Han, C. D. (2003). Effect of Hydrogen Bonding on the Rheology of Polycarbonate-Organoclay Nanocomposites , Polymer, 44(16): 4573 .
24.
Nam, P. H. , Maiti, P. , Okamoto, M. , Kotaka, T. , Nakayama, T. , Takada, M. , Oshima, M. , Usuki, A. , Hasegawa, N. and Okamoto, H. (2002). Foam Processing and Cellular Structure of Polypropylene-Clay Nanocomposites , Polym. Eng. Sci., 42(9): 1907 .
25.
Messersmith, P. B. and Giannelis, E. P. (1995). Synthesis and Barrier Properties of Poly("-carprolactone)-Layered Silicate Nanocomposites , J. Polym. Sci.: Polym. Chem., 33(7): 1047 .
26.
Yano, K. , Usuki, A. , Kurauchi, T. and Kamigaito, O. (1993). Synthesis and Properties of Polyimide-Clay Hybrid , J. Polym. Sci.: Polym. Chem., 31(10): 2493 .
27.
Strauss, W. , Ranade, A. , D’Souza, N. A. , Reidy, R. F. and Paceley, M. (2003). Effect of Montmorillonite on Formation of Polystyrene Foams Using Supercritical CO2, SPE ANTEC Tech. Papers, 3410.
28.
Colton, J. S. and Suh, N. P. (1987). Nucleation of Microcellular Foam: Theory and Practice , Polym. Eng. Sci., 27(7): 500 .
29.
Han, X. , Zeng, C. , Lee, L. J. , Koelling, K. W. and Tomasko, D. L. (2003). Polym. Eng. Sci., 43(6): 1261 .
