In this study two molds were designed and used in MuCell® technology to generate implants with a porous structure. To arrive the desired pore structure many process parameters were investigated for indicating the effects of process parameters on the pore morphology. This process parameter investigation was performed on each mold respectively, so that the influences of the mold design on the pore morphology have been researched by the same process parameter setting. It was found that the mold design also had effects on the pore structure in MuCell® technology. A proper mold design could improve the generated pore structure, such as porosity, pore diameter, and interconnectivity.
Kawashima, H. and Shimbo, M.Effect of Key Variables on Microstructure of Injection Molded Microcellular Polystyrene Foams, Cell. Polym., 2003: 22: 175-190.
6.
Wu, H., Krampe, E., Schlicht, H. and Wintermantel, E. ( 2009). Application of a Microcellular Injection Molding Process (MuCell®) to Produce an Implant with Porous Structure, Berlin, Springer Verlag.
7.
Okamoto, K.T. ( 2003). Microcellular Processing, Munich, Carl Hanser Verlag.
8.
Moore, M.J., Jabbari, E., Ritman, E.L. et al. Quantitative Analysis of Interconnectivity of Porous Biodegradable Scaffolds with Micro-CT, J. Biomed. Mater. Res. A., 2004: 71: 258-267.
9.
Lu, J.X. , Flautre, B., Anselme, K. et al. Role of Interconnections in Porous Bioceramics on Bone Recolonization In Vitro and In Vivo, J. Mater. Sci. Mater. Med., 1999: 10: 111-120.
10.
Mastrogiacomo, M., Scaglione, S., Martinetti, R. et al. Role of Scaffold Internal Structure on In Vivo Bone Formation in Macroporous Calcium Phosphate Bioceramics, Biomaterials, 2006: 27: 3230-3237.
11.
Lee, J.W.S. , Wang, J., Yoon, J.D. and Park, C.B.Strategies to Achieve a Uniform Cell Structure with a High Void Fraction in Advanced Structural Foam Molding, Ind. Eng. Chem. Res., 2008: 47: 9457-9464.
12.
Wintermantel, E. and Ha, S.-W. (2008). Medizintechnik, Berlin, Springer Verlag.
