Sage Journals: Discover world-class research

Abstract

This article investigates the foaming process of bi-cellular polystyrene foams blown with n-butane and water in extrusion. The bi-cellular foam structure has two types of cells: large cells ranging from 0.1 to 1.2 mm and small cells ranging in size from about 5% to about 50% of the average large cell size, which constitute more than 90% of the total cell volume. A bi-cellular structure has outstanding heat insulation property. In order to generate a bi-cellular structure, a water-blowing technology was used. This technique is environmentally benign and economical since butane and water are used as blowing agents. Despite these advantages, the foaming process and mechanism of bi-cellular foams have not been identified in detail. Therefore, in this article, an attempt has been made to enhance our knowledge and understanding of the foaming behavior of bi-cellular polystyrene foam. The effects of n-butane, water, and silica (a nucleating agent) on the foam cell morphology are presented.

Keywords

bi-cellular foam water foaming thermal conductivity silica.

Get full access to this article

View all access options for this article.

References

Biedermann, A. , Kudoke, C. , Merten , A. et al. Analysis of Heat Transfer Mechanisms in Polyurethane Rigid Foam, J. Cell. Plast., 2004: 37: 467-483.

Perkins, R. , Cusco, L. , Howley, J. et al. Thermal Conductivities of Alternatives to CFC-11 for Foam Insulation , J. Chem. Eng. Data, 2004: 46: 428-432.

Richard, R.G. and Shankland, I.R. A Transient Hot-wire Method for Measuring the Thermal Conductivity of Gases and Liquids, Int. J. Thermophys. , 1989: 10: 673-686.

Vo, C.V. and Paquet, A.N. An Evaluation of the Thermal Conductivity of Extruded Polystyrene Foam Blown with HFC-134a or HCFC-142b , J. Cell. Plast., 2004: 40: 205-228.

Glicksman, L. , Schuetz, M. and Schuetz, M. Radition, Heat Transfer in Foam Insulation , Int. J. Heat Mass Transfer , 1987: 30: 187-197.

Montreal Protocol on Substances that Deplete the Ozone Layer, Montreal (1987).

Suh, K. and Paquet, A.N. ( 2003). Polystyrene Foams, In: Scheirs, J. and Priddy, D. (eds), Modern Styrenic Polymers: Polystyrene and Related Polymers, Chap. 10, Chichester, UK, John Wiley & Sons, pp. 213-217.

Suh, K. and Killingbeck, G. ( 1978). GB Patent, 1,537,421.

Gendron, R. , Huneault, M. , Tatibouet, J. et al. Foam Extrusion of Polystyrene Blown with HFC-134a, Cell. Polym., 2002: 21: 315-341.

10.

Dournel, P. and Zipfel, L. ( 2001). HFC Blends for the Production of High Performance XPS Insulating Foams, In: Blowing Agents and Foaming Process, Foams Conference 2001, Paper no. 24, pp. 1-7.

11.

Butler, F. and Radlinsky, J. ( 1979). The Change of Thermal Conductivity with Time of Extruded Polystyrene Skinboards, In: International Foamed Plastic Symposium, Dusseldorf, Germany.

12.

Kuhn, J. , Ebert, H.-P. , Arduini-Schuster, M.C. et al. Thermal Transport in Polystyrene and Polyurethane Foam Insulations , Int. J. Heat Mass Transfer, 1992: 35: 1795-1801.

13.

Motani, S. , Saito, T. and Itho, T. ( 1991). U.S. Patent 5,064,874.

14.

Paquet, A.N. and Suh, K. ( 1993). U.S. Patent 5,240,968 .

15.

Suh, K. and Paquet, A.N. ( 1995). U.S. Patent 5,380,767 .

16.

Berghmans, H. , Chorvath, I. , Kelemen , P. et al. (2000). U.S. Patent 6,127,439 .

17.

Schubert, J.C. and Leduc, E.C. (1984). U.S. Patent 5,380,767 .

18.

Hurps, R.L. and Suh, K. ( 1985). U.S. Patent 4,559,367 .

19.

Paquet, A.N. and Suh, K. ( 1994). U.S. Patent 5,369,137 .

20.

Hayashi, T. , Tanaka, K. , Kobayashi, H. , et al. (2005). U.S. Patent 6,841,581 .

21.

Pallay, J. Kelemen, P. Berghmans, H. et al. Expansion of Polystyrene Using Water as the Blowing Agent, Macromol. Mater. Eng., 2000: 275: 18-25.

22.

Pallay, J. and Berghmans, H. ( 2002). Cell. Polym., 21: 1-18.

23.

Pallay, J. and Berghmans, H. ( 2002). Cell. Polym., 21: 19.

24.

Naguib, H.E. , Park, C.B. and Reichelt, N. Fundamental Foaming Mechanisms Governing the Volume Expansion of Extruded Polypropylene Foams, J. Appl. Polym. Sci., 2004: 91: 2661-2668.

25.

van Krevelen, D.W. (1990). Properties of Polymers , 3rd edn, Amsterdam, Oxford, New York, Elsevier Science Publishers.

26.

Xu, X. , Park, C.B. , Xu, D. et al. Effect of the Die Geometry on Cell Nucleation of PS Foams Blown with CO2, Polym. Eng. Sci., 2003: 43: 1378-1390.

27.

Gibbs, J.W. The Scientific Papers of Willard Gibbs, Vol. 1, New York , Dover Publication .

Bi-cellular Foam Structure of Polystyrene from Extrusion Foaming Process

Abstract

Keywords

Get full access to this article

References