This paper investigates the effect of silica aerogels on mechanical (flexural and impact), non-destructive and thermal properties of glass/epoxy composites. Silica aerogels were mixed with epoxy at various volume fractions (1% and 3%) and infused with glass fabrics to produce composite laminates. Flexural tests indicated that the addition of aerogels increased the flexural strength of composites at the warp direction. Low impact energy (10–30 J) test results exhibited that impact force and energy absorption of composites were slightly increased. Higher energy (100 J) caused more severe damages and the effect of aerogels was more obvious. The thermogravimetric analysis revealed that addition of aerogels increased the thermostability. Generally, addition 1% of aerogel provides more improvement on mechanical properties and thermal stability compared to addition 3%. Although there is not a linear relationship between aerogel content and thermal conductivity, samples with 3% aerogel exhibited lower thermal conductivity values than other samples.
KabebSM, HassanA, MohamadZ, Exploring the effects of nanofillers of epoxy nanocomposite coating for sustainable corrosion protection. Chem Eng Trans. 2019; 72: 121–126.
2.
TanabiH, ErdalM.Effect of CNTs dispersion on electrical, mechanical and strain sensing properties of CNT/epoxy nanocomposites. Results Phys. 2019; 12: 486–503.
3.
IslamMS, MasoodiR, RostamiH.The effect of nanoparticles percentage on mechanical behavior of silica-epoxy nanocomposites. J Nanosci. 2013; 2013: 1–10.
KhostavanS, FazliM, AhangariMG, The effect of interaction between nanofillers and epoxy on mechanical and thermal properties of nanocomposites: theoretical prediction and experimental analysis. Adv Polym Technol. 2019; 2019: 1–10.
6.
MadyanOA, FanM, FeoL, Enhancing mechanical properties of clay aerogel composites: an overview. Compos Part B. 2016; 98: 314–329.
ChakrabortyS, PisalAA, KothariVK, Synthesis and characterization of fibre reinforced silica aerogel blankets for thermal protection. Adv Mater Sci Eng. 2016; 2016: 1–8.
9.
Mazraeh-shahiZT, ShoushtariAM, BahramianAR.A new method for measuring the thermal insulation properties of fibrous silica aerogel composite. Procedia Mat Sci. 2015; 11: 583–587.
10.
FengJ, ZhangC, FengJ.Carbon fiber reinforced carbon aerogel composites for thermal insulation prepared by soft reinforcement. Mater Lett. 2012; 67 ( 1 ): 266–268.
11.
ZhuZ, YaoH, WangF, Fiber reinforced polyimide aerogel composites with high mechanical strength for high temperature insulation. Macromol Mater Eng. 2019; 304 ( 5 ): 1–8.
12.
GeslainA, GrobyJP, Romero-GarcíaV, Acoustic characterization of silica aerogel clamped plates for perfect absorption. J Non Cryst Solids. 2018; 499: 283–288.
13.
YangT, XiongX, VenkataramanM, Investigation on sound absorption properties of aerogel/polymer nonwovens. J Text Inst. 2019; 110 ( 2 ): 196–201.
14.
TalebiZ, SoltaniP, HabibiN, Silica aerogel/polyester blankets for efficient sound absorption in buildings. Constr Build Mater. 2019; 220: 76–89.
15.
BheekhunN, Abu TalibAR, HassanMR.Aerogels in aerospace: an overview. Adv Mater Sci Eng. 2013; 2013: 1–18.
16.
BhuiyanMAR, WangL, ShaidA, Silica aerogel-integrated nonwoven protective fabrics for chemical and thermal protection and thermophysiological wear comfort. J Mater Sci. 2020; 55 ( 6 ): 2405–2418.
17.
ShafiS, TianJ, NavikR, Fume silica improves the insulating and mechanical performance of silica aerogel/glass fiber composite. J Supercrit Fluids. 2019; 148: 9–15.
18.
ZhouT, ChengX, PanY, Mechanical performance and thermal stability of glass fiber reinforced silica aerogel composites based on co-precursor method by freeze drying. Appl Surf Sci. 2018; 437: 321–328.
19.
TianJ, ShafiS, TanH, Mechanical and thermal-insulating performance of silica aerogel enhanced jointly with glass fiber and fumed silica by a facile compressing technique. Chem Phys Lett. 2020; 739: 136950.
20.
LiZ, ChengX, HeS, Aramid fibers reinforced silica aerogel composites with low thermal conductivity and improved mechanical performance. Compos Part A. 2016; 84: 316–325.
LuZ, YuanZ, LiuQ, Multi-scale simulation of the tensile properties of fiber-reinforced silica aerogel composites. Mater Sci Eng A. 2015; 625: 278–287.
33.
ChengH, XueH, HongC, Preparation, mechanical, thermal and ablative properties of lightweight needled carbon fibre felt/phenolic resin aerogel composite with a bird's nest structure. Compos Sci Technol. 2017; 140: 63–72.
34.
PrichardJC, HoggPJ.The role of impact damage in post-impact compression testing. Composites. 1990; 21 ( 6 ): 503–511.
35.
HsiehT-H, HuangY-S.The mechanical properties and delamination of carbon fiber-reinforced polymer laminates modified with carbon aerogel. J Mater Sci. 2017; 52 ( 6 ): 3520–3534.
36.
ConradiM, ZorkoM, KocijanA, Mechanical properties of epoxy composites reinforced with a low volume fraction of nanosilica fillers. Mater Chem Phys. 2013; 137 ( 3 ): 910–915.
37.
GuoQ, ZhuP, LiG, One-pot synthesis of bimodal silica nanospheres and their effects on the rheological and thermal–mechanical properties of silica–epoxy composites. RSC Adv. 2015; 5 ( 62 ): 50073–50081.
38.
MaS, LiuW, HuC, Toughening of epoxy resin system using a novel dendritic polysiloxane. Macromol Res. 2010; 18 ( 4 ): 392–398.
39.
IshidaH.Chapter 1 - overview and historical background of polybenzoxazine research. In: IshidaH, AgagT, editor. Handbook of benzoxazine resins. Amsterdam: Elsevier; 2011. p. 3–81.
40.
AegerterMA, LeventisN, KoebelMM.Aerogels handbook. New York: Springer; 2011.
41.
SehaquiH, ZhouQ, BerglundLA.High-porosity aerogels of high specific surface area prepared from nanofibrillated cellulose (NFC). Compos Sci Technol. 2011; 71 ( 13 ): 1593–1599.
