This article presents the compressive mechanical response at low strains for a collection of polyethylene foams with high densities and cell sizes in the microcellular range. The materials under study had a relative density between 0.27 and 0.92, a homogeneous and multi-structured cellular structure with a dense skin and a foamed core. The Young’s modulus and collapse stress were reduced when density did, the modulus following a linear trend and the collapse stress a quadratic tendency. For relative densities higher than 0.7, the materials showed Young’s modulus slightly above the limit given by a potential law with exponent equal to one. In addition, it has been proved that variations in the cell size did not influence the elastic properties. The advantages of using these materials for flat structural panels have been analyzed. A reduction of the weight of flat panels loaded in bending of up to 35% can be reached by using these foams in spite of the solid sheet from which the foam was produced.
Park, C.B. ( 2000). Continuous Production of High-density and Low-density Microcellular Plastics in Extrusion, In: Lee, S.-T. (ed.), Foam Extrusion: Principles and Practise, USA, Technomic Publishing Company, USA, Chapter 11, pp. 263-305.
3.
Colton, J. and Suh, N.P.The Nucleation of Microcellular Thermoplastic Foam with Additives: Part I: Theoretical Considerations, Polym. Eng. Sci., 1987: 27: 485-492.
Kumar, V. and Weller, J.E.A Process to Produce Microcellular PVC, Int. Polym. Proc. , 1993: 8: 73-80.
6.
Arora, K.A., Lessor, A.J. and McCarthy, T.J.Preparation and Characterization of Microcellular Polystyrene Foams Processed in Supercritical Carbon Dioxide, Macromolecules, 1998: 31: 4614-4620.
7.
Kumar, V., VanderWel, M., Weller, J.E. and Seeler, K.A.Experimental Characterisation of the Tensile Behaviour of Microcellular Polycarbonate Foams, J. Eng. Mater. Technol., 1994: 116: 439-445.
8.
Wing, G., Pasricha, A., Tuttle, M. and Kumar, V.Time Dependent Response of Polycarbonate and Microcellular Polycarbonate, Polym. Eng. Sci., 1995: 35: 673-679.
9.
Sun, H., Sur, G.S. and Mark, J.E.Microcellular Foams from Polyethersulfone and Polyphenylsulfone: Preparation and Mechanical Properties, Eur. Polym. J., 2002: 38: 2373-2378.
10.
Sun, H. and Mark, J.E.Preparation, Characterization, and Mechanical Properties of Some Microcellular Polysulfone Foams, J. Appl. Polym. Sci., 2002: 86: 1692-1701.
11.
Martini, J.E. , Suh, N.P. and Waldman, F.A. (1984). US Patent 4473655.
12.
Kumar, V. ( 2004). Microcellular Plastics, In: Eaves, D. (ed.), Handbook of Polymeric Foams, Chapter 10, UK, Rapra Technology.
13.
Park, C.B., Behravesh, A.H. and Venter, R.D.Polymeric Foams: An Overview, In: Khemani, K.C. (ed.), Polymeric Foams: Science and Technology, Washington, DC, USA, ACS Symposium Series No. 669, pp. 1-7.
14.
Seibig, B., Huang, Q. and Paul, D.Design of a Novel Extrusion System for Manufacturing Microcellular Polymer , Cell. Polym., 2000: 19: 93-102.
15.
Bledzki, A.J. , Kuhn, J., Kirschiling, H. and Pitscheneder , W.Microcellular Injection Molding of PP and PC/ABS with Precision Mold Opening and Gas Counterpressure , Cell. Polym., 2008: 27: 91-100.
16.
Shimbo, M., Higashitani, I. and Miyano, Y.Mechanisms of Strength Improvement of Foamed Plastics having Fine Cells, J. Cell. Plast., 2007: 43(2): 157-167.
17.
Shimbo, M., Baldwin, D.F. and Suh, N.P. ( 1999). Viscoelastic and Mechanical Behavior of Microcellular Plastics with Varying Cell Size, In: Proceedings of the Conference on Advances Technology on Experimental Mechanics, pp. 309-313.
18.
Puri, R.R. and Collington, K.T.The production of Cellular Crosslinked Polyolefins. 2. The Injection-Molding and Press Molding Techniques, Cell. Polym., 1988: 7(57): 219-231.
19.
Eaves, D. (ed.) (2004). In: Handbook of Polymeric Foams, Chapter 8, UK, Rapra Technology.
20.
Rodriguez-Pérez, M.A., del Carpio, M.A., Lopez-Dίaz, J.F. and de Saja, J.A. ( 2006). Procedure to Produce Moulded Pipes with Cranial Microcellular Structure, Spanish Patent No. P200602638 (PCT Applied 2007).
21.
Gibson, L.J. and Ahsby, M.F. ( 1997). Cellular Solids, Structure and Properties, UK, Cambridge University Press.
22.
Rodrίguez-Pérez, M.A., Velasco, J.I., Arencón , D., Almanza, O. and de Saja, J.A.Mechanical Characterization of Closed-cell Polyolefin Foams, J. Appl. Polym. Sci., 2000: 75: 156-166.
23.
Rodrίguez-Pérez, M.A., Almanza, O., Ruiz-Herrero, J.L. and de Saja, J.A.The Effect of Processing on the Structure and Properties of Mechanical Response of Polyethylene Foams 15 Crosslinked Closed Cell Polyethylene Foams, Cell. Polym., 2008: 27: 179-200.
24.
Rodrίguez-Pérez, M.A., Gonzalez-Peña, J.I., Witten, N. and de Saja, J.A. The Effect of Cell Size on the Physical Properties of Crosslinked Closed Cell Polyethylene Foams Produced by a High Pressure Nitrogen Solution Process, Cell. Polym., 2002: 21: 165-194.
25.
Rodrίguez-Pérez, M.A. The Effect of Chemical Composition, Density and Cellular Structure on the Dynamic Mechanical Response of Polyolefin Foams, Cell. Polym., 2002: 21: 117-136.
