This article reports on sample preparation, characterization, CO2 sorption behavior, and foaming of blends of poly L-lactic acid (PLLA) and poly methyl methacrylate (PMMA) in compositions of 75/25, 50/50, and 25/75 wt.%. The crystallization and thermal decomposition behavior of the polymer blends were found to be dependant on concentration of PLLA in the samples. Annealing the specimens in air at 90°C for 24 h resulted in complete recrystallization in the 75/25 and 50/50 wt.% samples. Detailed studies on the sorption kinetics of CO2 in the prepared blend samples indicated gas solubilities to be comparable to those observed in neat PMMA, however, foam morphologies significantly improved in the blends when compared to neat PLLA.
Lu, L. and Mikos, A.G. (1999). Poly (Lactic acid), Polymer Data Handbook, Oxford University Press Inc., New York, pp. 627—633.
2.
Patel, M.M., Zeles, M.G., Manning, M.C., Randolph, T.W. and Anchordoquy, T.J. (2004). Degradation Kinetics of High Molecular Weight Poly (L-Lactide) Microspheres and Release Mechanism of Lipid: DNA Complexes, Journal of Pharmaceutical Sciences , 93(10): 2573—2584.
3.
Ray, S.S. and Okamoto, M. (2003). New Polylactide/Layered Silicate Nanocomposites , Macromol. Mater. Eng., 288(12): 936—944.
4.
Chen, C., Chueh, J.-Y., Tseng, H., Huang, H-M. and Lee, S.-Y. (2003). Preparation and Characterization of Biodegradable PLA Polymeric Blends, Biomaterials, 24(7): 1167—1173.
5.
Ohkoshi, I., Abe, H. and Doi, Y. ( 2000). Miscibility and Solid-state Structures for Blends of Poly[(S)-Lactide] with Atactic Poly[(R,S)-3-hydroxybutyrate], Polymer, 41(15): 5985—5992.
6.
Erba, R.D., Groeninckx, G., Maglio, G., Malinconico, M. and Migliozzi, A. (2001). Immiscible Polymer Blends of Semicrystalline Biocompatible Components: Thermal Properties and Phase Morphology Analysis of PLLA/PCL Blends , Polymer, 42(18): 7831—7840.
7.
Zhang, G., Zhang, J., Wang, S. and Shen, D. (2003). Miscibility and Phase Structure of Binary Blends of Polylactide and Poly (methyl methacrylate), Journal of Polymer Science: Part B: Polymer Physics, 41(1): 23—30.
Weir, N.A., Buchanan, F.J., Orr, J.F., Farrar, D.F. and Boyd, A. (2004). Processing, Annealing and Sterilisation of Poly-l-Lactide , Biomaterials, 25(18): 3939—3945.
10.
Mano, J.F., Ribelles, J.L.G., Alves, N.M. and Sanchez, M.S. (2005). Glass Transition Dynamics and Structural Relaxation of PLLA Studied by DSC: Influence of Crystallinity, Polymer , 46(49): 8258—8265.
11.
Hsu, S.L. (1999). Poly (methyl methacrylate), Polymer Data Handbook , Oxford University Press Inc., New York , pp. 655—657.
12.
Kim, T.K., Yoon, J.J., Lee, D.S. and Park, T.G. (2006). Gas Foamed Open Porous Biodegradable Polymeric Microspheres, Biomaterials, 27(2): 152—159.
13.
Handa, Y.P. and Zhang, Z. (2000). A Novel Stress-induced Nucleation and Foaming Process and its Application in Making Homogeneous Foams , Anisotropic Foams, and Multilayered Foams, Cellular Polymers , 19(2): 77—91.
14.
Fujimoto, Y. , Ray, S.S., Okamoto, M., Ogami, A., Yamada, K. and Ueda, K. (2003). Well-controlled Biodegradable Nanocomposite Foams: From Microcellular to Nanocellular, Macromolecular Rapid Communications, 24(7): 457—461
15.
Liao, X., Nawaby, A.V. and Day, M. (2005). Layered Open Cell Poly (L-lactic acid) Nanomorphology , ACS, Washington, USA.
Handa, Y.P. , Zhang, Z. and Wong, B. (2001). Solubility, Diffusivity, and Retrograde Vitrification in PMMA-CO2, and Development of Sub-micro Cellular Structure, Cellular Polymer, 20(1): 1—16.
18.
Wong, B., Zhang, Z. and Handa, Y.P. (1998). High-Precision Gravimetric Technique for Dertermining the Solubility and Diffusivity of Gases in Polymers, Journal of Polymer Science: Part B: Polymer Physics, 36(12): 2025—2032.
19.
Manninen, A.R. , Naguib, H.E., Nawaby, A.V. and Day, M. (2005). CO2 Sorption and Diffusion in Polymethyl Methacrylated-clay Nanocomposites, Polymer Engineering and Science, 45(7): 904—913.
20.
Sato, Y., Yamane, M., Sorakubo, A., Takishima, S., Masuoka, H., Yamamoto H. and Takasugi, M. (2000). Solubility and Diffusion Coefficient of Carbon Dioxide in Polylactide, The 21st Japan Symposium on Thermophsical Properties, Nagoya, Japan, pp. 196—199.
21.
Baldwin, D.F. , Shimbo, M. and Suh, N.P. (1995). The Role of Gas Dissolution and Induced Crystallization During Microcellular Polymer Process: A Study of Poly (Ethylene Terephthalate) and Carbon Dioxide Systems, Journal of Engineering Materials and Technology, 117(1): 62—74.
22.
Liao, X., Nawaby, A.V. and Handa, Y.P. (2005). Morphological Changes in Atactic/Syndiotactic Polystyrene Blend by Compressed Carbon Dioxide ACS, San Diego, USA.
