A complete three-dimensional morphological analysis is performed to determine the size and deformation of both foam cells and dispersed phase particles in the extrusion foaming of HDPE/PP blends. Each dimension is carefully measured to determine interaction between blending and foaming on the final foam morphology. In this study, blends of 0, 10, 30, 50, 70, 90, and 100% PP in HDPE are foamed using azodicarbonamide (ACA). The effect of using a compatibilizing agent (Kraton D 1102) is also included.
Juntunen, R. P. , Kumar, V. and Weller, J. E. (2000). Impact Strength of High Density Microcellular Poly(Vinyl Chloride) Foams , J. Vinyl Add. Tech., 6(2): 93-99 .
2.
Tejeda, Herrera, E. , Sahagún, Zepeda, C. , González-Núñez, R. and Rodrigue, D. (2005). Morphology and Mechanical Properties of Foamed Polyethylene-polypropylene Blends , J. Cell. Plast., 41(5): 417-435 .
3.
Doroudiani, S. , Park, C. B. and Kortschot, M. T. (1998). Processing and Characterization of Microcellular Foamed High-density Polyethylene/Isotactic Polypropylene Blends , Polym. Eng. Sci., 38(7): 1205-1215 .
4.
Djoumaliisky, S. , Christova, D. , Vaylo Petrov, I. , Touleshkov, N. and Nedkov, E. (2002). Flow Behaviour of Gas-containing LDPE/i-PP Melts , Macromol. Symp., 181(1): 493-497 .
5.
Spitael, P. and Macosko, C. W. (2004). Strain Hardening in Polypropylenes and its Role in Extrusion Foaming , Polym. Eng. Sci., 44(11): 2090-2100 .
6.
Rachtanapun, P. , Selke, S. E. M. and Matuana, L. M. (2004). Relationship between Cell Morphology and Impact Strength of Microcellular Foamed High-density Polyethylene/Polypropylene Blends , Polym. Eng. Sci., 44(8): 1551-1560 .
7.
Rachtanapun, P. , Selke, S. E. M. and Matuana, L. M. (2004). Effect of the High-density Polyethylene Melt Index on the Microcellular Foaming of High-density Polyethylene/Polypropylene Blends , J. Appl. Polym. Sci., 93(1): 364-371 .
8.
Chen, X. , Heuzey, M. C. and. Carreau, P. J. (2004). Rheological Properties of Injection Molded LDPE and mPE Foams , Polym. Eng. Sci., 44(11): 2158-2164 .
9.
Zhang, Y. , Rodrigue, D. and Aït-Kadi, A. (2003). Morphology and Mechanical Properties of Foamed Polyethylene Blends , Cell. Polym., 22(4): 211-236 .
10.
Kraton Technical Data Sheet. KRATON POLYMERS U.S. LLC, Houston (TX), USA.
11.
Chiu, W. Y. , Shyu, G. D. (1988). Die Swell from Capillary Die and Slit Die: A Theoretical Study , J. Appl. Polym. Sci., 35(4): 847-862 .
12.
Gosselin, R. and Rodrigue, D. (2005). Cell Morphology Analysis of High Density Polymer Foams , Polym. Test., 24(8): 1027-1035 .
13.
Xu, X. , Xu, D. and Park, C. B. (2004). Effects of CO2 Content on the Expansion Behaviors of PS Foams , ANTEC Proc., 2646-2652 .
14.
Lee, M. and Tzoganakis, C. (2000). Effects of Supercritical CO2 on the Viscosity and Morphology of Polymer Blends , Adv. Polym. Tech., 19(4): 300-311 .
15.
Lee, M. , Tzoganakis, C. and Park, C. B. (1998). Extrusion of PE/PS Blends with Supercritical Carbon Dioxide , Polym. Eng. Sci., 38(7): 1112-1120 .
