Improving of Cell Structure of Microcellular Foams Based on Polypropylene/High-density Polyethylene Blends

Abstract

Polypropylene/high-density polyethylene (PP/HDPE) blends and their nanocomposites are melt compounded using twin-screw extruder. The as-extruded samples are then batch foamed with supercritical carbon dioxide. It is demonstrated that the blend with a viscosity ratio close to unity produces a microcellular foam with very uniformly distributed finer cell structure, whereas nonuniformly distributed cells may be obtained in the foamed blend with a viscosity ratio greater than unity. Then three methods are tried to improve the cellular structure of the latter. The results show that the increase of HDPE content improves the uniformity of cellular size and distribution, but results in the increase of cell diameter and the decrease of cell density. Properly lowering the foaming temperature reduces the cell diameter and improves the cellular distribution. Incorporating nanoparticles, including nano-calcium carbonate and nanoclay, into the blend leads to a significantly smaller cell size and more homogeneous cell distribution. A critical content of nanoparticles exists to obtain dramatically improved cell structure. Moreover, the results show that most cells in foamed blends are nearly reticulated. So open-celled foams are achieved in this work.

Keywords

blends foams nanocomposites polypropylene high-density polyethylene.

Get full access to this article

View all access options for this article.

References

Martini, J. , Waldman, F. and Suh, N.P. (1982). Production and Analysis of Microcellular Thermoplastic Foams, SPE ANTEC Tech Papers, pp. 674—676.

Doroudiani, S. , Park, C.B. and Kortschot , M.T. (1996). Effect of the Crystallinity and Morphology on the Microcellular Foam Structure of Semicrystalline Polymers, Polym. Eng. Sci., 36(21): 2645—2662.

Doroudiani, S. , Park, C.B. and Kortschot , M.T. (1998). Processing and Characterization of Microcellular Foamed High-density Polyethylene/ isotactic Polypropylene Blends, Polym. Eng. Sci., 38(7): 1205—1215.

Rachtanapun, P. , Selke, S.E.M. and Matuana , L.M. (2004). Effect of the High-density Polyethylene Melt Index on the Microcellular Foaming of High-density Polyethylene/polypropylene Blends, J. Appl. Polym. Sci., 93(1): 364—371.

Rachtanapun, P. , Selke, S.E.M. and Matuana , L.M. (2004). Relationship between Cell Morphology and Impact Strength of Microcellular Foamed High-density Polyethylene/polypropylene Blends, Polym. Eng. Sci., 44(8): 1551—1560.

Okamoto, M. , Nam, P.H. , Maiti, P. , Kotaka, T. , Nakayama, T. , Takada, M. , Ohshima, M. , Usuki, A. , Hasegawa, N. and Okamoto H. (2001). Biaxial Flow-induced Alignment of Silicate Layers in Polypropylene/clay Nanocomposite Foam, Nano Lett., 1(9): 503—505.

Nam, P.H. , Maiti, P. and Okamoto, M. (2002). Foam Processing and Cellular Structure of Polypropylene/clay Nanocomposites , Polym. Eng. Sci., 42(9): 1907—1918.

Taki, K. , Yanagimoto, T. and Funami, E. (2004). Visual Observation of CO2 Foaming of Polypropylene-clay Nanocomposites, Polym. Eng. Sci., 44(6): 1004—1011.

Huang, H.X. and Wang, J.K. (2007). Improving Polypropylene Microcellular Foaming through Blending and the Addition of Nano-calcium Carbonate, J. Appl. Polym. Sci., 106(1): 505—513.

10.

Huang, H.X. and Wang, J.K. (2005). Microcellular PP-CaCO 3 Nanocomposites: Relationship between Nanocomposite Morphology and Foam Morphology, Proceedings of the ASME Materials Division , 100MD: 575—580.

11.

Finlay, J. , Sheppard, S. , Tookey, S. , Hill, M.J. and Barham, P.J. (2001). Unexpectedly High Young's Moduli Recorded for IPP/HDPE Blends, J. Polym. Sci.—Physics, 39(12): 1404—1414.

12.

Wang, K.H. , Lee, Y.H. and Park, C.B. (2004). Optimum Content of Clay for Microcellular LDPE/clay Nanocomposite Foams Blown with CO2, SPE ANTEC Tech Papers, pp. 2510—2514.

13.

Yang, K.M. , Lee, S.H. and Oh J.M. (1999). Effects of Viscosity Ratio and Compatibilizers on the Morphology and Mechanical Properties of Polycarbonate/acrylonitrile-butadiene-styrene Blends, Polym. Eng. Sci., 39(9): 1667—1677.

14.

Han, X.M. , Shen, J. , Huang , H.X. , Tomasko, D.L. and Lee , L.J. (2007). CO2 Foaming Based on Polystyrene/Poly(Methyl Methacrylate) Blend and Nanoclay, Polym. Eng. Sci., 42(2): 103—111.

15.

Baldwin, D.F. , Park, C.B. and Suh , N.P. (1996). Microcellular Processing Study of Poly (Ethylene Terephthalate) in the Amorphous and Semicrystalline States, Polym. Eng. Sci., 36(11): 1437—1453.

16.

Colton, J.S. and Suh, N.P. (1987). The Nucleation of Microcellular Thermoplastic Foam with Additives: Part I: Theoretical Considerations , Polym. Eng. Sci., 27(7): 485—492.

17.

Han, X.M. , Zeng, C. , Lee , L.J. , Koelling, K.W. and Tomasko, D.L. (2003). Extrusion of Polystyrene Nanocomposite Foams with Supercritical CO2, Polym. Eng. Sci., 43(6): 1261—1275.

18.

Han, X.M. , Lee, L.J. and Huang, H.X. (2005). Foaming of Nanoclay Reinforced PS/PMMA Polymer Blends, SPE ANTEC Tech Papers, pp. 2518—2522.

19.

Lee, Y.H. , Park, C.B. , Wang , K.H. and Lee , M.H. (2005). HDPE/clay Nanocomposite Foams Blown with Supercritical CO2, SPE ANTEC Tech Papers, pp. 1970—1975.

20.

Huang, H.X. , Jiang, G. and Mao, S.Q. (2005). Effect of Flow Fields on Morphology of PP/nano-CaCO 3 Composite and Its Rheological Behavior, Proceedings of the ASME Materials Division, 100MD: 567—574.

21.

Huang, H.X. , Jiang, G. and Mao, S.Q. (2006). Microstructure and On-line Shear Viscosity of PP/nano-CaCO3 Composites Prepared by Twin-Screw Extruder, J. Mater. Sci., 41(15): 4985—4988.