This article demonstrates the effect of exfoliated nano-clay on the microcellular foam processing of amorphous and crystalline nylon. Amorphous and crystalline nylon 6 nanocomposites are prepared using a twin-screw extruder. The exfoliated nanocomposite structures are characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Nylon and its nanocomposites are foamed in extrusion using supercritical CO2. Subsequently, the cell morphologies of nylon and its nanocomposite foams are investigated. It appeared that the nano-clay not only enhanced cell nucleation, but also suppressed cell deterioration during the microcellular foaming of nylon.
Collias, D.I. , Baird, D.G. and Borggreve, R.J.M. (1994). Impact Toughening of Polycarbonate by Microcellular Foaming , Polymer, 35(18): 3978–3983 .
3.
Collias, D.I. and Baird, D.G. (1995a). Impact Behavior of Microcellular Foams of Polystyrene and Styrene-Acrylonitrile Copolymer, and Single-edge-notched Tensile Toughness of Microcellular Foams of Polystyrene, Styrene-Acrylonitrile Copolymer and Polycarbonate , Polym. Eng. Sci., 35(14): 1178–1183 .
4.
Collias, D.I. and Baird, D.G. (1995b). Tensile Toughness of Microcellular Foams of Polystyrene, Styrene-Acrylonitrile Copolymer, and Polycarbonate, and the Effect of Dissolved-Gas on the Tensile Toughness of the Same Polymer Matrices and Microcellular Foams , Polym. Eng. Sci., 35(14): 1167–1177 .
5.
Kumar, V. , Vanderwel, M. , Weller, J. and Seeler, K.A. (1994). Experimental Characterization of the Tensile Behavior of Microcellular Polycarbonate Foams , J. Eng. Mater.-T. ASME, 116(4): 439–445 .
6.
Kumar, V. and Seeler, K.A. (1994). Effect of CO2 Saturation and Desorption on the Fatigue Life of Polycarbonate , J. Eng. Mater.-T. ASME, 116(4): 451–456 .
7.
Kumar, V. and Seeler, K.A. (1993). Tension-Tension Fatigue of Microcellular Polycarbonate — Initial Results , J. Reinf. Plast. Comp., 12(3): 359–376 .
8.
Doroudiani, S. , Park, C.B. and Kortschot, M.T. (1996). Characterization of Microcellular Foamed HDPE/PP Blends , SPE ANTEC Tech Paper, 42: 1914–1919 .
9.
Park, C.P. (1991). In: Klempner, D. and Frish, K.C. (eds), Polymeric Foams, Ch. 9, Hanser, New York .
10.
Park, C.B. , Doroudiani, S. and Kortschot, M.T. (1998). Processing and Characterization of Microcellular Foamed High-Density Polyethylene/Isotactic Polypropylene Blends , Polym. Eng. Sci., 38(7): 1205–1215 .
11.
Naguib, H.E. , Park, C.B. and Reichelt, N. (2004). Fundamental Foaming Mechanisms Governing the Volume Expansion of Extruded Polypropylene Foams , J. Appl. Poly. Sci., 91(4): 2661–2668 .
12.
Naguib, H.E. , Park, C.B. , Panzer, U. and Reichelt, N. (2002). Strategies for Achieving Ultra Low-Density Polypropylene Foams , Polym. Eng. Sci., 42(7): 1481–1492 .
13.
Kitagawa, S., Nakayama, T. and Isono, M. (1987). US Patent 4 766 159.
14.
Ratzsch, M. , Panzer, U. , Hesse, A. and Bucka, H. (1999). Developments in High Strength i-PP: Technology Properties, Applications and Markets , SPE ANTEC Tech Paper, 45: 2071–2075 .
Alexandre, M. and Dubois, P. (2000). Polymer-layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials , Mater. Sci. Eng. R., R28(1–2): 1–63 .
17.
Qi, Z.N. and Shang, W.Y. (2002). Polymer/Layered Silicate Nanocomposites: Theory and Practice, Chemical Industrial Publications, Beijing .
Shah, D. , Maiti, P. , Gunn, E. , Schmidt, D.F. , Jiang, D.D. , Batt, C.A. and Giannelis, E.P. (2004). Dramatic Enhancements in Toughness of Polyvinylidene Fluoride Nanocomposites via Nanoclay-directed Crystal Structure and Morphology , Adv. Mater, 16(14): 1173–1177 .
20.
Okada, A., Fukushima, Y., Kawasumi, M., Inagaki, S., Sugiyami, S., Kurauchi, T. and Kamigaito, O. (1988). US Patent 4 739 007.
21.
Usuki, A. , Kojima, Y. , Kawasumi, M. , Okada, A. , Fukushima, Y. , Kurauchi, T. and Kamigaito, O. (1993). Synthesis of Nylon 6-Clay Hybrid , J. Mater. Res., 8(5): 1179–1184 .
22.
Liu, L.M. , Qi, Z.N. and Zhu, X.G. (1999). Studies on Nylon 6 Clay Nanocomposites by Melt-intercalation Process , J. Appl. Polym. Sci., 71(7): 1133–1138 .
23.
Shah, R.K. and Paul, D.R. (2004). Nylon 6 Nanocomposites Prepared by a Melt Mixing Masterbatch Process , Polymer, 45(9): 2991–3000 .
24.
Cho, J.W. and Paul, D.R. (2001). Nylon 6 Nanocomposites by Melt Compounding , Polymer, 42(3): 1083–1094 .
25.
Fornes, T.D. and Paul, D.R. (2003). Crystallization Behavior of Nylon 6 Nanocomposites , Polymer, 44(14): 3945–3961 .
26.
Yoon, P.J. , Fornes, T.D. and Paul, D.R. (2002). Thermal Expansion Behavior of Nylon 6 Nanocomposites , Polymer, 43(25): 6727–6741 .
27.
Fornes, T.D. , Yoon, P.J. , Keskkula, H. and Paul, D.R. (2001). Nylon 6 Nanocomposites: The Effect of Matrix Molecular Weight , Polymer, 42(25): 9929–9940 .
28.
Fornes, T.D. , Yoon, P.J. , Hunter, D.L. , Keskkula, H. and Paul, D.R. (2002). Effect of Organoclay Structure on Nylon 6 Nanocomposite Morphology and Properties , Polymer, 43(22): 5915–5933 .
Han, X.M. , Koelling, K.W. , Tomasko, D.L. and Lee, L.J. (2002). Continuous Microcellular Polystyrene Foam Extrusion with Supercritical CO2 , Polym. Eng. Sci., 42(11): 2094–2106 .
31.
Wang, K.H. , Lee, Y.H. and Park, C.B. (2004). Optimum Content of Clay for Microcellular LDPE/Clay Nanocomposite Foams Blown with CO2 , SPE ANTEC Tech Paper, 50: 2510–2514 .
32.
Okamoto, M. , Nam, P.H. , Maiti, P. , Kotaka, T. , Nakayama, T. , Takada, M. , Ohshima, M. , Usuki, A. , Hasegawa, N. and Okamoto, H. (2001). Biaxial Flow-Induced Alignment of Silicate Layers in Polypropylene/Clay Nanocomposite Foam , Nano Lett., 1(9): 503–505 .
33.
Nam, P.H. , Maiti, P. , Okamoto, M. , Kotaka, T. , Nakayama, T. , Takada, M. , Ohshima, M. , Usuki, A. , Hasegawa, N. and Okamoto, H. (2002). Foam Processing and Cellular Structure of Polypropylene/Clay Nanocomposites , Polym. Eng. Sci., 42(9): 1907–1918 .
34.
Ramesh, N.S. , Rasmussen, D.H. and Campbell, G.A. (1994). The Heterogeneous Nucleation of Microcellular Foams Assisted by the Survival of Microvoids in Polymers Containing Low Glass-Transition Particles. 1. Mathematical-Modeling and Numerical-Simulation , Polym. Eng. Sci., 34(22): 1685–1697 .
35.
Ramesh, N.S. , Rasmussen, D.H. and Campbell, G.A. (1994). The Heterogeneous Nucleation of Microcellular Foams Assisted by the Survival of Microvoids in Polymers Containing Low Glass-Transition Particles. 2. Experimental Results and Discussion , Polym. Eng. Sci., 34(22): 1698–1706 .
36.
Park, C.B. and Cheung, L.K. (1997). A Study of Cell Nucleation in the Extrusion of Polypropylene Foams , Polym. Eng. Sci., 37(1): 1–10 .
37.
Krause, B. , Mettinkhof, R. , van der Vegt, N.F.A. and Wessling, M. (2001). Microcellular Foaming of Amorphous High-T-g Polymers Using Carbon Dioxide , Macromolecules, 34(4): 874–884 .
38.
Lee, J.W.S. , Wang, K.H. and Park, C.B. (2004). Challenge to Manufacture of Low-Density Microcellular Polycarbonate Foams Using CO2 , SPE ANTEC Tech Paper, 50: 3117–3121 .
