A Novel System Design for Continuous Processing of Plastic/Wood-Fiber Composite Foams with Improved Cell Morphology

Abstract

It is believed that the moisture that is inherently present in nondried wood-fibers adversely affects the cell morphology of plastic/wood-fiber composite foams processed in extrusion. Based on this hypothesis, achieving a continuous extrusion-based production of fine-celled plastic/wood-fiber composite foams witha desirable quality would be strongly conditioned by the efficiency of the system designed for uninterrupted wood-fiber moisture elimination. This paper presents an innovative approachin addressing this problem by implementing the well-known cascade devolatilizing system in a chemical blowing agent (CBA) based production of plastic/wood-fiber composite foams. It comprises a moisture-evaporation tandem extrusion system equipped witha vent at the interconnection of the two extruders to serve for purging the moisture in the atmosphere. In order to check the performance of the newly developed system, an experimental study has been carried out for comparing the cell morphology and the volume expansion ratios of the foams obtained by processing identically formulated foamable plastic/wood-fiber composite mixtures using simultaneously the cascade devolatilizing tandem extrusion system and a corresponding single extruder withno vent. The experimental results revealed that the foams produced by using the cascade devolatilizing tandem system exhibited significantly improved cell morphologies and surface quality.

Get full access to this article

View all access options for this article.

References

1. Balatinecz, J.J. and Woodhams, R.T. (1993). J. Forestry, 91: 22-22.

2. Chtourou, A. , Riedl, B. and Ait-Kadi, A. (1992). J. Reinf. Plast. Comp., 11: 372-372.

3. Raj, R.G. , Kokta, B.V. , Groleau, G. and Daneault, C. (1989). Plast. Rubber Proc. Appl., 11: 215-215.

4. Youngquist, J.A. and Rowell, R.M. (1990). In: Maloney, T.M. (ed.), Proceedings of 23rd Int. Particleboard/ Comp. Mat. Symp., Pullman: Washington State Univ. p. 141-141.

5. Felix, J. (1993). PhD Thesis, Department of Polymer Technology, Chalmers University of Technology, Göteborg, Sweden.

6. Maldas, D. , Kokta, B.V. and Daneault, C. (1989). J. Vinyl Tech., 11: 90-90.

7. Kokta, B.V. , Maldas, D. , Daneault, C. and Béland, P. (1990). J. Vinyl Tech., 12: 146-146.

8. Matuana, L.M. , Woodhams, R.T. , Balatinecz, J.J. and Park, C.B. (1998). Polym. Compos., 19: 446-446.

9. Matuana, L.M. , Balatinecz, J.J. and Park, C.B. (1998). Polym. Eng. Sci., 38: 765-765.

10.

10. Matuana, L.M. , Park, C.B. and Balatinecz, J.J. (1997). J. Vinyl Add. Tech., 3: 265-265.

11.

11. Matuana, L.M. , Park, C.B. and Balatinecz, J.J. (1998). Polym. Eng. Sci., 38: 1862-1862.

12.

12. Fuad, M.Y.A. , Shukor, R. , Ishak, Z.A.M. and Omar, A.K.M. (1994). Plast. Rubber Proc. Appl., 21: 225-225.

13.

13. Raj, R.G. , Kokta, B.V. and Nizio, J.D. (1992). J. Appl. Polym. Sci., 45: 91-91.

14.

14. Park, B.D. and Balatinecz, J.J. (1996). J. Thermoplast. Comp. Mat., 9: 343-343.

15.

15. Meyers, G.E. , Chahyadi, I. , Coberly, C.A. and Ermer, D.S. (1991). Intern. J. Polymeric Mater., 15: 21-21.

16.

16. Klason, C. , Kubàt, J. and Strömvall, H.E. (1984). Intern. J. Polymeric Mater., 10: 159-159.

17.

17. Geimer, R.L. , Clemons, C.M. and Wood, J.E. Jr. (1993). Wood Fiber Sci., 25: 163-163.

18.

18. Rizvi, G.M., Matuana, L.M. and Park, C.B. (1999). SPE ANTEC. Technical Papers, 45: 2040. Also accepted for publication in Polymer Engineering and Science.

19.

19. Rizvi, G.M. (1999). MASc Thesis, University of Toronto.

20.

20. Zhang, H. (1999). MASc Thesis, University of Toronto.

21.

21. Rauwendaal, C. (1994). Polymer Extrusion. 3rd Edn. Hanser Publishers.

22.

22. Turk, D.L. and Grill, O. (1999). US Patent No. 5,858,522.

23.

23. Deaner, M.J., Puppin, G. and Heikkila, K.E. (1998). US Patent No. 5,827,607.

24.

24. Deaner, M.J., Puppin, G. and Heikkila, K.E. (1996). US Patent No. 5,539,027.

25.

25. Deaner, M.J., Puppin, G. and Heikkila, K.E. (1996). US Patent No. 5,486,553.

26.

26. Deaner, M.J., Puppin, G. and Heikkila, K.E. (1999). US Patent No. 5,932,334.

27.

27. Behravesh, A.H. , Park, C.B. , Cheung, L.K. and Venter, R.D. (1996). J. Vinyl Add. Tech., 2: 349-349.

28.

28. Franc, A. (1998). Personal Communication, Boehringer Ingelheim.

29.

29. Saunders, J.H. (1991). In: Klempner, D. and Frisch, K.C. (eds.), Handbook of Polymeric Foams and Foam Technology. Chap. 2. New York: Hanser.

30.

30. Baldwin, D.F. , Park, C.B. and Suh, N.P. (1998). Polym. Eng. Sci., 38: 674-674.

31.

31. Matuana, L.M. , Park, C.B. and Balatinecz, J.J. (1997). Polym. Eng. Sci., 37: 1137-1137.

32.

32. Park, C.B. , Baldwin, D.F. and Suh, N.P. (1995). Polym. Eng. Sci., 35: 432-432.

33.

33. Zhang, H., Rizvi, G.M., Lin, W.S., Guo, G. and Park, C.B. (2001). Development of an extrusion system for fine-celled foaming of wood-fiber composites using a PBA. SPE, ANTEC 2001, Dallas, Texas. 6–10 May. abstract submitted.

34.

34. Rizvi, G., Park, C.B. and Matuana, L.M. Foaming of PS/Wood-fiber composites using moisture as a blowing agent. Polymer Engineering and Science, (accepted for publication).

35.

35. Behravesh, A.H. , Park, C.B. and Venter, R.D. (1998). Cell. Polym., 17: 309-309.

36.

36. van Krevelen, D.W. (1980). Properties of Polymer. New York: Elsevier.