Laboratory data are presented on the effect of constant temperature aging on the apparent thermal conductivity of polyurethane foam insulation for refrigerators and freezers. The foam specimens were blown with HCFC-141b and with three of its potential replacements—HFC-134a, HFC-245fa, and cyclopentane. Specimens were aged at constant temperatures of 90 F, 40 F, and-10 F. Thermal conductivity measurements were made on two types of specimens: full-thickness simulated refrigerator panels containing foam enclosed between solid plastic sheets, and thin slices of core foam cut from similar panels. Results are presented for the first three years of a multi-year aging study. Preliminary comparisons of measured data with predictions of a mathematical aging model are presented.
Get full access to this article
View all access options for this article.
References
1.
1. Wilkes, K.E., Yarbrough, D.W. and Weaver, F.J. (1997). Aging of Polyurethane Foam Insulation in Simulated Refrigerator Walls, International Conference on Ozone Protection Technologies, pp. 253–262.
2.
2. Wilkes, K.E., Gabbard, W.A. and Weaver, F.J. (1998). Aging of Polyurethane Insulation Foamed with Second-and Third-Generation Blowing Agents. In: Proceedings of the 49th Annual International Appliance Technical Conference, pp. 387–398.
3.
3. Wilkes, K.E., Gabbard, W.A. and Weaver, F.J. (1998). Aging of Polyurethane Foam Insulation in Simulated Refrigerator Panels–Initial Results with Third-generation Blowing Agents, The Earth Technologies Forum, pp. 280–289.
4.
4. Wilkes, K.E., Gabbard, W.A. and Weaver, F.J. (1999). Aging of Polyurethane Foam Insulation in Simulated Refrigerator Panels–One-Year Results with Third-generation Blowing Agents, The Earth Technologies Forum, pp. 303–313.
5.
5. Wilkes, K.E., Gabbard, W.A., Weaver, F.J. and Richard Booth, J. (2000). Aging of Polyurethane Foam Insulation in Simulated Refrigerator Panels–Two-Year Results with Third-generation Blowing Agents, Polyurethanes, pp. 417–428.
6.
6. C 518, Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus, 2000 Annual Book of ASTM Standards, Vol. 04.06, pp. 173–184, American Society for Testing and Materials, West Conshohocken, PA.
7.
7. Haworth, G.J. (1996). Next Generation Insulation Foam Blowing Agents for Refrigerators/Freezers, In: Proceedings, 47th International Appliance Technical Conference, pp. 271–282.
8.
8. C 1303, Standard Test Method for Estimating the Long-Term Change in the Thermal Resistance of Unfaced Rigid Closed Cell Plastic Foam by Slicing and Scaling Under Controlled Laboratory Conditions, 2000 Annual Book of ASTM Standards, Vol. 04.06, pp. 726–734, American Society for Testing and Materials, West Conshohocken, PA.
9.
9. Hoogendoorn, C.J. (1994). Thermal Ageing, Low Density Cellular Plastics: Physical Basis of Behaviour, Hilyard, N.C. and Cunningham, A. (eds), pp. 153–186, Chapman & Hall, London.
10.
10. Reid, R.C. and Sherwood, T.K. (1966). The Properties of Gases and Liquids, 2nd Ed., pp. 483–484, McGraw-Hill, New York.
11.
11. ASHRAE Handbook-Fundamentals (1997). Atlanta: American Society of Heating, Refrigerating, and Air-Conditioning Engineers, pp. 19.75–19.79.
12.
12. Eckert, E.R.G. and Drake, Jr. R.M. (1959). Heat and Mass Transfer, pp. 506-506, McGraw-Hill, New York.
13.
13. Shankland, I.R., Williams, D.J., Bogdan, M.C. and Logsdon, P.B. (1998). Next Generation Blowing Agents for Thermal Insulating Foams, 60 Years of Polyurethanes, Kresta, J.E., Eldred, E.W. (eds.), pp. 86-86, Technomic Publishing Co., Inc., Lancaster, PA.
14.
14. Reid, R.C. and Sherwood, T.K. (1966). The Properties of Gases and Liquids, 2nd Ed., pp. 405-405, McGraw-Hill, New York.
15.
15. ASHRAE Handbook-Fundamentals (1997). Atlanta: American Society of Heating, Refrigerating, and Air-Conditioning Engineers, p. 18.3.
16.
16. Glicksman, L.R. (1994). Heat Transfer in Foams, Low Density Cellular Plastics: Physical Basis of Behaviour, Hilyard, N.C. and Cunningham, A. (eds.), pp. 105–152, Chapman & Hall, London.
17.
17. Permeance Measurements were Made by Modern Controls, Inc., Minneapolis, Minnesota.
18.
18. Booth, J.R., Graves, R.S. and Yarbrough, D.W. (1996). Effective Diffusion Coefficients for CFC-11 by Gravimetric Depletion from Thin Slices of PIR Foams, Thermal Conductivity 23, Wilkes, K.E., Dinwiddie, R.B. and Graves, R.S. (eds.), pp. 352–337, Technoinic Publishing Co., Inc., Lancaster, PA.
