Modelling and analysis of electrodynamic suspension of an aluminium disc as a complex engineering problem

Abstract

A final year project is an effective tool in teaching complex engineering phenomena. Problem identification and formulation, applying mathematical and engineering knowledge for solving a problem, and design and synthesis of the final product are some of the outcomes that the students achieve upon completing such projects. In this paper, the design of an electrodynamic suspension system, in which an aluminium disc suspended above two concentric coils, is considered. The mathematical description is presented and proved that the value of electromagnetic force exerted on the disc is proportional to the inverse square of its height. The system is then simulated with a finite element method software and the effects of varying different system’s parameters on the exerted force are studied through simulation results. Analytical calculations and simulation results are validated by being compared with experimental measurements, which show a close agreement.

Keywords

Magnetic levitation electrodynamic suspension finite element method Eddy currents complex engineering problem solving

Get full access to this article

View all access options for this article.

References

Document: E-02-PE, Qualification Standard for Bachelor of Science in Engineering (BSc(Eng))/Bachelors of Engineering (BEng): NQF Level 8 Revision 4, Engineering Council of South Africa, 2014.

Barry

and Hudgins

Levitation of an aluminium disc in a magnetic flux well. Int J Electr Eng Educ 2012; 44: 280–288.

Branco

PJC.

Development of two laboratory experiments for teaching electrodynamic forces in an advanced course in electromechanical system. Int J Electr Eng Educ 2010; 47: 380–392.

Santisteban

de Noronha

and Suhett

MR.

The finite element method as an effective control design tool. Int J Electr Eng Educ 2012; 44: 230–243.

Huijuan

Zhenyang

and Tengfei

Case study of enquiry-based learning designed for rotating magnetic fields in electric machinery course. Int J Electr Eng Educ 2017; 54: 341–353.

Riba

Garcia

and Romero

An educational tool to assist the design process of switched reluctance machines. Int J Electr Eng Educ 2017; 54: 35–56.

LeeKim

and Lee

Review of Maglev train technology. IEEE Trans Magn 2006; 42: 1917–1925.

Suresh

and Raghu

Non vibration and safe electromagnetic regenerative suspension lift design (MAGLIF). Int Innovat Res J Eng Tech 2015; 1: 13–16.

Earnshaw

On the nature of the molecular forces which regulate the constitution of the luminiferous ether. Trans Cambridge Philos Soc 1842; 7: 97–112.

10.

Cazacu

andMoraru A. Escaping from Earnshaw theorem. Revue Roumaine Des Sciences Techniques Serie Electrotechnique Et Energetqque 2006; 51(3): 275–280.

11.

Oka

and Higuchi

A three-degrees-of-freedom Maglev system with actuators. Elect Eng Jpn 1996; 116: 294–300.

12.

Thompson

MT.

Eddy current magnetic levitation models and experiments. IEEE Potentials 2000; 19: 40–44.

13.

Meeker

Finite element method magnetics: OctaveFEMM. Washington, DC: Foster-Miller, [online], http://femm.info/archives/doc/octavefemm.pdf (2006) (accessed 11 November 2017).

14.

Bussy

and Ghayoor

Magnetic levitation based on electrodynamic suspension. In: Proceedings of the 25th Southern African Universities power engineering conference, Stellenbosch, South Africa, January 2017, pp.124–129.

15.

Laithwaite

Electromagnetic levitation. IEEE Proc 1965; 112: 2361–2375.