Commercially Available Friction-Reducing Patient-Transfer Devices Reduce Biomechanical Stresses on Caregivers’ Upper Extremities and Low Back

Abstract

Objective:

The aim of this study was to evaluate the efficacy of commercially available friction-reducing patient-transfer devices in reducing biomechanical stresses on caregivers and patients.

Background:

Caregivers suffer from high prevalence of work-related musculoskeletal disorders, which is associated with manual patient handling. However, there is not enough information available on the efficacy of various friction-reducing devices in reducing biomechanical stresses in the upper extremities and low back.

Method:

During patient-transfer tasks performed by 20 caregivers, we measured hand force; shoulder and trunk posture; shoulder moment; muscle activity in the flexor digitorum superficialis, extensor digitorum communis, biceps, triceps, trapezius, and erector spinae; and usability ratings from four devices: a draw sheet, a repositioning sheet, a slide board, and an air-assisted device. In addition, triaxial head acceleration of mock patients was measured to evaluate patients’ head acceleration.

Results:

The slide board and air-assisted device significantly reduced hand force (p < .001), shoulder flexion (p < .001), shoulder moment (p < .001), muscle activities of caregivers (p < .004), and patients’ head acceleration (p < .023) compared with the draw sheet. However, no significant differences in biomechanical measures were found between the repositioning and draw sheets. The air-assisted device consistently showed the lowest biomechanical stresses and was most preferred by participants.

Conclusion:

Reduction in caregivers’ biomechanical stresses and mock patients’ head acceleration indicates that a slide board and an air-assisted device can be effective engineering controls to reduce risk of injury.

Application:

The study results can provide a recommendation for engineering controls to reduce biomechanical stresses for both caregivers and patients.

Keywords

air-assisted device friction-reducing device head acceleration musculoskeletal disorders patient handling

Get full access to this article

View all access options for this article.

References

Bartnik

L. M.

Rice

M. S.

(2013). Comparison of caregiver forces required for sliding a patient up in bed using an array of slide sheets. Workplace Health & Safety, 61, 393–400. https://doi.org/10.3928/21650799-20130816-52

Bureau of Labor Statistics. (2016). Case and demographic characteristics for work-related injuries and illnesses involving days away from work. Retrieved from https://www.bls.gov/iif/oshcdnew.htm

Chaffin

D. B.

(1975). Ergonomics guide for the assessment of human static strength. American Industrial Hygiene Association Journal, 36, 505–511.

Cheung

Gillen

Faucett

Krause

(2006). The prevalence of and risk factors for back pain among home care nursing personnel in Hong Kong. American Journal of Industrial Medicine, 49, 14–22.

Chow

A. Y.

Dickerson

C. R.

(2016). Determinants and magnitudes of manual force strengths and joint moments during two-handed standing maximal horizontal pushing and pulling. Ergonomics, 59, 534–544.

Crisco

J. J.

Fiore

Beckwith

J. G.

Chu

J. J.

Brolinson

P. G.

Duma

McAllister

T. W.

Duhaime

A.-C.

Greenwald

R. M.

(2010). Frequency and location of head impact exposures in individual collegiate football players. Journal of Athletic Training, 45, 549–559.

Davis

K. G.

Kotowski

S. E.

(2015). Prevalence of musculoskeletal disorders for nurses in hospitals, long-term care facilities, and home health care: A comprehensive review. Human Factors, 57, 754–792. https://doi.org/10.1177/0018720815581933

Dempster

W. T

. (1955). Space requirements of the seated operator: Geometrical, kinematic, and mechanical aspects of the body with special reference to the limbs (Report No. 55-159). University of Michigan, AERO Medical Laboratory.

Drew

K. E.

Kozey

J. W.

Moreside

J. M.

(2015). Biomechanical evaluation and perceived exertion of a lateral patient-handling task. Occupational Ergonomics, 12, 151–163.

10.

Garg

Owen

Beller

Banaag

(1991). A biomechanical and ergonomic evaluation of patient transferring tasks: Bed to wheelchair and wheelchair to bed. Ergonomics, 34, 289–312. https://doi.org/10.1080/00140139108967314

11.

Harms-Ringdahl

Ekholm

Schüldt

Linder

Ericson

M. O.

(1996). Assessment of jet pilots’ upper trapezius load calibrated to maximal voluntary contraction and a standardized load. Journal of Electromyography and Kinesiology, 6, 67–72.

12.

Hermens

H. J.

Freriks

Merletti

Stegeman

Blok

Rau

Disselhorst-Klug

Hägg

(1999). European recommendations for surface electromyography. Roessingh Research and Development, 8, 13–54.

13.

Hinz

Menzel

Bluethner

Seidel

(2010). Seat-to-head transfer function of seated men: Determination with single and three axis excitations at different magnitudes. Industrial Health, 48, 565–583.

14.

International Organization for Standardization. (1997). Mechanical vibration and shock—Evaluation of human exposure to whole body vibration—Part 1: General requirements (ISO 2631-1:1997). Retrieved from https://www.iso.org/standard/7612.html

15.

Jonsson

. (1982). Measurement and evaluation of local muscular strain in the shoulder during constrained work. Journal of Human Ergology, 11(1), 73–88.

16.

Kahn

J. F.

Monod

(1989). Fatigue induced by static work. Ergonomics, 32, 839–846.

17.

Larson

R. E.

Murtagh

E. M.

Rice

M. S.

(2018). Forces involved when sliding a patient up in bed. Work, 59, 439–448.

18.

Lavender

S. A

Conrad

K. M

Reichelt

P. A

Kohok

A. K

Gacki-Smith

. (2007). Designing ergonomic interventions for EMS workers—Part II: Lateral transfers. Applied Ergonomics, 38(2), 227–236.

19.

Liao

Yoshikawa

Goto

Hamada

(2015). Caregiver and patient’s comfort investigation based on head motion behavior analysis during transfer care. Procedia Manufacturing, 3, 440–447.

20.

Lloyd

Baptiste

(2006). Biomechanical evaluation of friction-reducing devices for lateral patient transfers. AAOHN Journal, 54, 113–119.

21.

MacKinnon

S. N.

Vaughan

C. L.

(2005). Effect of the reach distance on the execution of one-handed submaximal pull forces. Occupational Ergonomics, 5, 161–172.

22.

Marras

W. S.

Davis

K. G.

Kirking

B. C.

Bertsche

P. K.

(1999). A comprehensive analysis of low-back disorder risk and spinal loading during the transferring and repositioning of patients using different techniques. Ergonomics, 42, 904–926. https://doi.org/10.1080/001401399185207

23.

Mbaisi

E. M.

Ng’ang’a

Wanzala

Omolo

(2013). Prevalence and factors associated with percutaneous injuries and splash exposures among health-care workers in a provincial hospital, Kenya, 2010. Pan African Medical Journal, 14, 10.

24.

McGinley

L. D.

Bunke

(2008). Best practices for safe handling of the morbidly obese patient. Bariatric Nursing and Surgical Patient Care, 3, 255–260.

25.

Mirka

G. A.

Marras

W. S.

(1993). A stochastic model of trunk muscle coactivation during trunk bending. Spine, 18, 1396–1409.

26.

Mogk

Keir

(2003). The effects of posture on forearm muscle loading during gripping. Ergonomics, 46, 956–975.

27.

Nagavarapu

Lavender

S. A.

Marras

W. S.

(2016). Spine loading during the application and removal of lifting slings: the effects of patient weight, bed height and work method. Ergonomics. Advance online publication. https://doi.org/10.1080/00140139.2016.1211750

28.

Occupational Safety and Health Administration. (2009). OSHA 3182-3R: Guidelines for nursing homes, ergonomics for the prevention of musculoskeletal disorders. Washington, DC: U.S. Department of Labor.

29.

Odell

Barr

Goldberg

Chung

Rempel

(2007). Evaluation of a dynamic arm support for seated and standing tasks: A laboratory study of electromyography and subjective feedback. Ergonomics, 50, 520–535.

30.

Pellino

T. A.

Owen

Knapp

Noack

(2006). The evaluation of mechanical devices for lateral transfers on perceived exertion and patient comfort. Orthopaedic Nursing, 25, 4–10.

31.

Picchiotti

M. T

Weston

E. B

Knapik

G. G

Dufour

J. S

Marras

W. S

. (2019). Impact of two postural assist exoskeletons on biomechanical loading of the lumbar spine. Applied Ergonomics, 75, 1–7.

32.

Post

Clark

J. M.

Robertson

D. G. E.

Hoshizaki

T. B.

Gilchrist

M. D.

(2017). The effect of acceleration signal processing for head impact numeric simulations. Sports Engineering, 20, 111–119.

33.

Putz-Anderson

Bernard

B. P.

Burt

S. E.

Cole

L. L.

Fairfield-Estill

Fine

L. J.

Grant

K. A.

Gjessing

Jenkins

Hurrell

J. J.

Jr. (1997). Musculoskeletal disorders and workplace factors (NIOSH 104). Washington, DC: National Institute for Occupational Safety and Health.

34.

Reynolds

B. B.

Patrie

Henry

E. J.

Goodkin

H. P.

Broshek

D. K.

Wintermark

Druzgal

T. J.

(2016). Practice type effects on head impact in collegiate football. Journal of Neurosurgery, 124, 501–510.

35.

Skotte

Fallentin

(2008). Low back injury risk during repositioning of patients in bed: The influence of handling technique, patient weight and disability. Ergonomics, 51, 1042–1052.

36.

Soderberg

G. L.

Knutson

L. M.

(2000). A guide for use and interpretation of kinesiologic electromyographic data. Physical Therapy, 80, 485.

37.

Sun

Buchholz

Punnett

Gallegan

Quinn

(2015). Evaluation of low-tech client transfer devices used by home care aides. In Proceedings of the Human Factors and Ergonomics Society 59th Annual Meeting (pp. 1264–1268). Santa Monica, CA: Human Factors and Ergonomics Society. https://doi.org/10.1177/1541931215591203

38.

Sun

Buchholz

Quinn

Punnett

Galligan

Gore

(2018). Ergonomic evaluation of slide boards used by home care aides to assist client transfers. Ergonomics, 61, 913–922.

39.

U.S. Census Bureau. (2013). Men in nursing occupations: American Community Survey highlight report. Washington, DC: Author.

40.

Weiner

Kalichman

Ribak

Alperovitch-Najenson

(2017). Repositioning a passive patient in bed: Choosing an ergonomically advantageous assistive device. Applied Ergonomics, 60, 22–29.

41.

Wiggermann

(2015). Biomechanical evaluation of a bed feature to assist in turning and laterally repositioning patients. Human Factors, 58, 748–757. https://doi.org/10.1177/0018720815612625

42.

Winter

D. A.

(2009). Biomechanics and motor control of human movement. New York, NY: Wiley.

43.

Yassi

Lockhart

(2013). Work-relatedness of low back pain in nursing personnel: A systematic review. International Journal of Occupational Environment and Health, 19, 223–244. https://doi.org/10.1179/2049396713Y.0000000027

44.

Zhou

Wiggermann

(2017). Ergonomic evaluation of brake pedal and push handle locations on hospital beds. Applied Ergonomics, 60, 305–312. https://doi.org/10.1016/j.apergo.2016.12.012