The political decision to implement competency-based training widely throughout vocational education systems in Australia, before rigorous evaluation through adequate pilot programs, was made because it was viewed as essential for increasing skill levels and work productivity. Recent data indicate that Australia's relative international competitiveness actually declined during 1994–97, suggesting an urgent need to reassess underpinning policies. Despite the marked reluctance of the Australian National Training Authority to commission studies specifically assessing the effectiveness of competency-based training, several independent studies have been carried out. These and other commissioned studies indicate some major problems with competency-based training which has not achieved stated objectives of increasing skill levels. Research also indicates that competency-based training has not been adopted widely by business and industry. The appropriateness of using public agencies to implement innovations which are untested, and may not be supported by the wider community intended to benefit from their introduction, is queried.
Australian Mission on Management Skills. (1991). Report (Vol. 1). Canberra: AGPS.
2.
BeeversB. (1993). Competency-based training in TAFE: Rhetoric and reality. In CollinsC. (Ed.), Competencies. Canberra: Australian College of Education.
3.
BerlinerD. C. (1996) Uninvited comments from an uninvited guest. Educational Researcher, 25 (8), 47–50.
4.
CollinsC. (1993). Introduction. In CollinsC. (Ed.), Competencies. Canberra: Australian College of Education.
5.
CornfordI. (1993). Theories of skill learning and research into the development of expertise: Some implications for competency-based training. In After competence: The Future of Post-compulsory Education and Training Conference: Conference papers, Vol.1. Brisbane: Griffith University, Centre for Skill Formation, Research and Development.
6.
CornfordI. (1996). Experienced teachers' views of competency-based training in NSW TAFE. In Learning & work: The challenges: Conference papers, Vol. 4 (pp. 105–115). Brisbane: Griffith University, Centre for Learning and Work Research.
7.
CornfordI. (1997). Competency-based training: An assessment of its strengths and weaknesses by NSW vocational teachers. Australian and New Zealand Journal of Vocational Education Research, 5 (1), 53–76.
8.
CornfordI. (1999). Rediscovering the importance of learning and curriculum in vocational education and training in Australia. Journal of Vocational Education and Training, 51, 93–113.
9.
CornfordI.AthanasouJ. (1995). Developing expertise through practical training. Industrial and Commercial Training, 27(2), 10–18.
10.
CullenR. B. (1997). Workskills and national competitiveness: External benchmarks. Report No. 2: Benchmarking Australian qualification profiles. A project conducted by Performance Management Solutions for ANTA. Hawthorn, Vic.: Performance Management Solutions Pty Ltd.
11.
EwerP.AblettD. (1996). Competency based training: Has it all gone wrong? In Selby-SmithC.FerrierF. (Eds.), The economic impact of vocational education and training. Canberra: AGPS.
12.
FieldL. (1996, March–May). Is there room for CBT in the learning organisation?Australian Training Review, 18, pp. 24–25.
13.
FitzGeraldV. (1994). Successful reform. Report to the Australian National Training Authority from the Allen Consulting Group Pty Ltd. Melbourne: Allen Consulting Group.
14.
FooksD. (1998). Industry partnership: Leaning on a broken reed. Training Agenda, 6 (3), 15–16.
15.
FoysterJ. (1997a, March–May). Do we still need CBT?Australian Training Review, 22, p. 32.
16.
FoysterJ. (1997b, June–August). Does Australia need CBT?Australian Training Review, 23 pp. 21–25.
17.
GoncziA.HagerP.OliverL. (1990) Establishing competency standards in the professions (National Office of Overseas Skills Recognition Research Paper No. 1). Canberra: AGPS.
18.
HagerP. (1994). Is there a cogent philosophical argument against competency standards?Australian Journal of Education, 38, 3–18.
19.
HagerP. (1995). Competency standards—a help or a hindrance? An Australian perspective. Journal of Vocational Education and Training, 47, 141–151.
20.
HagerP.GoncziA. (1993). Attributes and competence. Australian and New Zealand Journal of Vocational Education Research, 1, 36–45.
21.
HawkeG.CornfordI. (1998). Australian vocational education policy change: But will the revolution improve the quality of training?Australian and New Zealand Journal of Vocational Education Research, 6 (2), 104–133.
22.
HaytonG.WagnerZ. (1998). Performance assessment in vocational education and training. Australian and New Zealand Journal of Vocational Education Research, 6 (1), 69–85.
23.
HeywoodL.GoncziA.HagerP. (1992) A guide to development of competency standards for professions (National Office of Overseas Skills Recognition Research Paper No. 7). Canberra: AGPS.
24.
House of Representatives Standing Committee for Long Term Strategies (B. Jones, Chair). (1995). Report of the inquiry into the workforce of the future. Canberra: AGPS.
25.
Industry Task Force on Leadership and Management Skills (D. Karpin, Chair). (1995). Enterprising nation: Report. Canberra: AGPS.
26.
JacksonN. (1993). Competence: A game of smoke and mirrors? In CollinsC. (Ed.), Competencies. Canberra: Australian College of Education.
27.
LidburyR. (1995). Level of awareness of competency-based training in the Fabrication and Welding (Heavy) Industry in the Hunter Institute of Technology Region. Unpublished research project submitted for the Bachelor of Education (Technical), University of Technology, Sydney.
28.
MaglenL. (1998). Keynote address. Inaugural Conference of the Australian Vocational Education and Training Research Association (AVETRA), Sydney, 16–17 February.
29.
McBeathC. (1995). Overcoming barriers to effective curriculum change: A case study in dissemination practice. In 3rd International Conference on Post-compulsory Education and Training, 21–23 November: Conference papers, Vol. 2. Brisbane: Griffith University, Centre for Learning and Work Research.
30.
PickersgillR. (1996). Who is using the competency standards for assessment? Survey of the purchasers of the ‘Competency standards for assessment’. Clovelly, NSW: CSB — Assessors and Workplace Trainers.
31.
RaggattP. (1997). The politics of competence: A case study in policy. In 5th International Conference on Post-compulsory Education and Training: Conference papers, Vol. 2. (pp. 69–84). Brisbane: Griffith University.
32.
Roux-SalembienD.McDowellD.CornfordI. (1996). Teachers' perceptions of the introduction of competency-based training in NSW TAFE Commercial Cookery. In Learning & work: The challenges: Conference papers, Vol. 3. (pp. 95–105). Brisbane: Griffith University, Centre for Learning and Work Research.
33.
RyanR. (1997a, June–August). Does Australia need CBT?Australian Training Review, 23, 21–25.
34.
RyanR. (1997b, September–November). CBT: The final words. Australian Training Review, 24, p. 35.
35.
SimonsM. (1996). ‘Something old, something new’: TAFE teachers' ways of working with CBT. In Learning & work: The challenges: Conference papers, Vol. 3. (pp. 23–31). Brisbane: Griffith University, Centre for Learning and Work Research.
36.
SmithE. (1997). Does competency-based training mean the end of teaching as we know it? In 5th International Conference on Post-compulsory Education and Training: Conference papers, Vol. 2 (pp. 69–84). Brisbane: Centre for Learning and Work Research, Griffith University.
37.
SmithE.HillD.SmithA.PerryP.RobertsP.BushT. (1995). The availability of competency-based training in TAFE and non-TAFE settings in 1994. Canberra: AGPS.
38.
SmithE.KeatingJ. (1997). Making sense of training reform and competency based training. Wentworth Falls, NSW: Social Science Press.
39.
SmithE.LowrieT.HillD.BushA.LobegeirJ. (1997). Making a difference? How competency-based training has changed teaching and learning. Wagga Wagga: Charles Sturt University.
40.
StaszC. (1996). Workplace skills in practice: Understanding the new basic skills. Keynote address at the 4th Annual International Conference on Post-compulsory Education and Training, Surfers Paradise, 2–4 December. In Learning & work: The challenges. Brisbane: Griffith University, Centre for Learning and Work Research.
41.
SteedmanH. (1994). Assessment, certification and recognition of occupational skills and competences. European Journal of Vocational Training, 1, 36–42.
42.
StevensonJ. (Ed.). (1994). Cognition at work: The development of vocational expertise. Adelaide: NCVER.
43.
StevensonJ. (1995). The political colonisation of the cognitive construction of competence. Journal of Vocational Education and Training, 47, 353–364.
44.
StevensonJ. (1997). Editorial. Australian and New Zealand Journal of Vocational Education Research, 5 (1), vii–ix.
45.
Van BerkelC. (1997a, September–November). CBT: The final words. Australian Training Review, 24, pp. 34–35.
46.
Van BerkelC. (1997b, June–August). Does Australia need CBT?Australian Training Review, 23, pp. 21–25, 35.
47.
WatsonA. (1993). Competency-based vocational education and training in Australia: Some unresolved issues. Australian and New Zealand Journal of Vocational Education Research, 1, 93–125.
