Simultaneous Measurement of Strain and Temperature of Structures Using Fiber Optic Sensor

Abstract

This paper presents the simultaneous measurement of strain and temperature using fiber Bragg grating/extrinsic Fabry-Perot interferometric (FBG/EFPI) sensor. This hybrid sensor consists of a FBG element encapsulated in EFPI sensor. Temperature can be measured from FBG part and strain from EFPI. We have analytically derived the relationship of the sensor outputs to measurands (strain and temperature) and yielded the characteristic matrix of sensor. Therefore, it is not necessary to perform sensor calibration for each sensor. By the derived relationship, we could measure directly and simultaneously the strain and temperature using a single sensing element. The fiber optic sensor was surface-mounted on an aluminum alloy beam together with an electrical resistance strain gauge and a thermocouple. The wavelength-swept fiber laser (WSFL) was used as a light source to supply high signal power. The simultaneous measurement of thermal strain and temperature was performed in a thermal chamber. Experimental results of fiber optic sensor show good agreements with those of conventional gauges such as strain gauge and thermocouple.

Get full access to this article

View all access options for this article.

References

Bhatia, V. , Campbell, D. , Claus, R.O. and Vengsarkar, A.M. (1997). Simultaneous strain and temperature measurement with long-period gratings. Optics Letters, 22(9): 648-650.

Hong, C.S. , Ryu, C.Y. , Koo, B.Y. , Kim, C.G. and Yun, S.H. (2000). Strain monitoring of smart bridge using fiber Bragg grating sensor system with wavelength-swept fiber laser. In: Liu, S.C. (Ed.), Smart Structures and Materials: Smart Systems for Bridges, Structures, and Highways, Proc. SPIE Vol. 3988, pp. 371-379.

Jin, X.D. , Sirkis, J.S. , Chung, J.K. and Venkat, V.S. (1998). Embedded in-line fiber etalon/Bragg grating hybrid sensor to measure strain and temperature in a composite beam, Journal of Intelligent Material Systems and Structures, 9(3): 171-181.

Liu, T. , Fernando, G.F. , Zhang, L. , Bennion, I. , Rao, Y.J. and Jackson, D.A. (1997). Simultaneous strain and temperature measurement using a combined fibre Bragg grating/extrinsic Fabry-Perot sensor. In: Day, G.W. and Kersey, A.D. (Eds.), 12th International Conference on Optical Fiber Sensors: (OFS-12). Proc. SPIE 3746, VA, USA, pp. 40-43.

Patrick, H.J. , Williams, G.M. , Kersey, A.D. , Pedrazzani, J.R. and Vengsarkar, A. M. (1996). Hybrid fiber Bragg grating/long period fiber grating sensor for strain/temperature discrimination. IEEE Photonics Technology Letters, 8(9): 1223-1225.

Tran, T.A. , Greene, J.A. , Murphy, K.A. , Bhatia, V. , Sen, M.B. and Claus, R.O. (1995). EFPI manufacturing improvements for enhanced performance and reliability. In: Robert Crowe C. , (Ed.), Smart Structures and Materials (1995): Industrial and Commercial Applications of Smart Structures Technologies. Proc. SPIE 2447, San Diego, California, pp. 312-323.

Xu, M.G. , Archambault, J.L. , Reekie L. and Dakin, J.P. (1994). Discrimination between strain and temperature effects using dual-wavelength fibre grating sensors. Electronics Letters, 30(13): 1085-1087.

Yun, S.H. , Richardson, D.J. and Kim, B.Y. (1998). Interrogation of fiber grating sensor arrays with a wavelength-swept fiber laser, Optics Letters, 23(11): 843-845.