Smart Flexible Microrobots for Scanning Electron Microscope (SEM) Applications

Abstract

In the scanning electron microscope (SEM), specially designed microrobots can act as a flexible assembly facility for hybrid microsystems, as probing devices for in-situ tests on IC structures or just as a helpful teleoperated tool for the SEM operator when examining samples. Several flexible microrobots of this kind have been developed and tested. Driven by piezoactuators, these few cubic centimeters small mobile robots can perform manipulations with a precision of up to 10 nm and transport the gripped objects at speeds of up to 30 mm/s. In accuracy, flexibility and price they are superior to conventional precision robots. A new SEM-suited microrobot prototype is described in this paper. The SEM’s vacuum chamber has been equipped with various elements like flanges and CCD cameras to enable the robot to operate. In order to use the SEM image for the automatic real-time control of the robots, the SEM’s electron beam is actively controlled by a PC. The latter submits the images to the robots’ control computer system. For obtaining three-dimensional information in real time, especially for the closed-loop control of a robot endeffector, e.g., microgripper, a triangulation method with the luminescent spot of the SEM’s electron beam is being investigated.

Get full access to this article

View all access options for this article.

References

Allegro, S. and J. Jacot , 1997,“Automated Microassembly by Means of a Micromanipulator and External Sensors,” Proc. of the Int. Conf. Microrobotics and Micromanipulation, SPE ’97, pp. 108-116, Vol. 3202, Pittsburgh, PA.

Breguet, J. - M., E. Pernette and R. Clavel , “Stick and Slip Actuators and Parallel Architectures Dedicated to Microrobotics,” 1996, Proc. SPIE 2906, Boston, MA, pp. 13-24.

Bruninx, E. and G. Rudstam , 1961, “Electro-Spraying: a Method of Making Samples for b Counting Allowing Accurate Correction for Self-Scattering and Self-Absorption,” Nucl. Instr. and Meth., 13, pp. 131-140.

Buerkle, A. and F. Schmoeckel , 2000, “Quantitative Measuring System of a Flexible Microrobot-Based Microassembly Station,” 4th Seminar on Quantitative Microscopy, Semmering, Austria.

Fatikow, S. , A. Buerkle and J. Seyfried , 1999, “Automatic Control System of a Microrobot-Based Microassembly Station Using Computer Vision,” SPIE’s International Symposium on Intelligent Systems & Advanced Manufacturing, Conference on Microrobotics and Microassembly, SPIE, pp. 11-22, Boston, MA.

Fatikow, S., J. Seyfried, St. Fahlbusch, A. Buerkle and F. Schmoeckel, 1999, “Entwicklung flexibler Mikroroboter zur Handhabung von Mikroobjekten,” 4. Chemnitzer Fachtagung Mikromechanik & Mikroelektronik, pp. 138-143.

Fatikow, S. , J. Seyfried , St. Fahlbusch , A. Buerkle and F. Schmoeckel , 2000, “A Flexible Microrobot-Based Microassembly Station,” Journal of Intelligent & Robotic Systems, 27, pp. 135-169.

Hatamura, Y. , M. Nakao and T. Sato , 1997, “Construction of an Integrated Manufacturing System for 3D Microstructure Concept, Design and Realization,” CIRP Annals, 46(1), pp. 313-318.

Kammrath & Weiss GmbH, 1999, Dortmund, Product information.

10.

Kasaya, T. , H. Miyazaki , S. Saito and T. Sato , 1998, “Microobject Handling under SEM by Vision-Based Automatic Control,” Microrobotics and Micromanipulation, SPIE 3519, Boston, pp. 181-191.

11.

LogiCad3D GmbH, 1999, Gilching, Germany, Driver CD.

12.

Mitsuishi, M. et al. , “A Tele-Micro Machining System with Operational Environment Transmission under a Stereo-SEM,” 1996, Proc. IEEE Intern. Conf on Robotics and Automation, Minneapolis, pp. 2194-2201.

13.

Munassypov, R. , B. Grossmann , B. Magnussen and S. Fatikow , 1996, “Development and Control of Piezoelectric Actuators for the Mobile Micromanipulation System,” Proc. ACTUATOR, pp. 213-216, Bremen.

14.

Point Electronic GmbH , 1999, Digital Image Scanning System, Halle, http://www.pointelectronic.de.

15.

Ruocco, S. R. , 1991, Sensoren und Wandler fur Roboter, Weinheim, VCH.

16.

Tomomasa Sato et al. , 1995, “Hand-Eye System in Nano Manipulation World.” IEEE Int. Conf on Robotics and Automation, pp. 59-66.

17.

Weck, M. , J. Hümmler and B. Petersen , 1997, “Assembly of Hybrid Micro Systems in a Large-Chamber Scanning Electron Microscope by Use of Mechanical Grippers,” Micromachining and Microfabrication, pp. 223-229, Austin, TX, SPIE.