Multi-Duct ER Dampers

Abstract

This paper describes the design, construction, testing and modeling of controllable damping devices utilizing electro-rheological (ER) materials. The rheological properties of ER materials (yield stress and viscoelasticity) are extremely sensitive to electric fields. Modulations of the electric field in an electrorheological damper results in a corresponding change in device forces. The key feature of the ER devices described in this paper is a set of multiple concentric annular ducts through which the ER material flows. The annular ducts are formed by a set of concentric metallic tubes, which may be electrically charged with a high voltage potential, or electrically grounded. Three designs targeting different force levels (2-6 kN), are designed, tested and modeled. The device analyses used in the design incorporate a simplified closed form relation for the flow behavior of ER materials. Evolutionary and algebraic device models are fit to the measured force response of the devices over a range of harmonic frequencies and at zero and high electric field magnitudes. The evolutionary model is motivated by observations and simulations of ER materials in simple shear, and the algebraic model is convenient for control and feedback linearization applications. The algebraic model is evaluated with data collected with random excitation and with switching electric fields. The three devices display different levels of pre-yield viscoelasticity. Friction, due to seals in the device, was not accounted for in the initial design, and affected the behavior of the device as tested.

Get full access to this article

View all access options for this article.

References

Anaskin, I.F. , Gleb, V.K. , Korobko, E.V. , Khizhinskii, B.P. and Khusid, B.M. (1984). Effect of external field on amplitude-frequency characteristics of electrorheological damper. Journal of Engineering Physics, 46: 233-238.

Block, H. and Kelly, J.P. (1988). Review article: electro-rheology. J. Physics D: Applied Physics, 21: 1661-1677.

Block, H. , Kelly, J.P. , Qin, A. and Watson, T. (1990). Materials and mechanisms in electrorheology. Langmuir, 6: 6-14.

Brooks, D. , Goodwin, J. , Hjelm, C. , Marshall, L. and Zukoski, C. (1986). Visco-elastic studies on an electro-rheological fluid. Colloids and Surfaces, 18: 219-312.

Bonnecaze, R.T. and Brady, J.F. (1992). Dynamic simulation of an electrorheological fluid. J. Chemical Physics, 96(3): 2183-2202.

Burton, S.A. , Makris, N. , Konstantopoulos, I. and Antsaklis, P.J. (1996). Modeling the response of ER damper: Phenomenology and emulation. J. Engineering Mechanics, 122(9): 987-906.

Filisko, F.E. and Radzilowski, L.H. (1990). An intrinsic mechanism for the activity of alumino-silicate based electrorheological materials. J. Rheology, 34(4): 539-552.

Gamota, D.R. and Filisko, F.E. (1991). Dynamic mechanical studies of electrorheological materials: moderate frequencies. J. Rheology, 35: 399-425.

Gavin, H.P. , Hanson, R.D. and Filisko, F.E. (1996a). Electrorheological dampers, part i: analysis and design. J. Appl. Mech., ASME, 63: 669-675.

10.

Gavin, H.P. , Hanson, R.D. and Filisko, F.E. (1996b). Electrorheological dampers, part II: testing and modeling. J. Appl. Mech., ASME, 63: 676-682.

11.

Gavin, H.P. (1997). The effect of particle concentration inhomogeneities on the steady flow of electro and magneto-rheological materials. J. Non-Newtonian Fluid Mechanics.

12.

Gavin, H.P. (1998). Design method for high-force electrorheological dampers. Smart Materials and Structures, 7: 664-673.

13.

Gavin, H.P. (2001). Control of seismically excited vibration using electrorheological materials and lyapunov methods. IEEE Trans. on Control System Technology, 9: 27-36.

14.

Gordaninijad, F. , Ray, A. and Wang, H. (1997). Control of forced vibration using multi-electrode electro-rheological fluid dampers. J. Vibration and Acoustics, 119: 527-531.

15.

Halsey, T.C. and Toor, W. (1990). Structure of electrorheological fluids. Physical Review Letters, 65(22): 2820-2823.

16.

Halsey, T.C. (1992). Electrorheological fluids. Science, 258: 761-766.

17.

Hindmarsh, A.C. (1983). ODEPACK, a systematized collection of ODE solvers. In: Stepleman, R.S. (ed.), Scientific Computing. New York: Elsevier.

18.

Jordan, T.C. and Shaw, M.T. (1989). Electrorheology. IEEE Transactions on Electrical Insulation, 24: 849-878.

19.

Jordan, T.C. , Shaw, M.T. and McLeish, T.C.B. (1992). Viscoelastic response of electrorheological fluids, II. Field strength and strain dependence. J. Rheology, 36: 441-462.

20.

Kamath, G.M. and Wereley, N.M. (1997). A nonlinear viscoelasticplastic model for electrorheological fluids. Smart Materials and Structures, 6: 351-359.

21.

Kamath, G.M. and Wereley, N.M. (1997). Nonlinear viscoelastic-plastic mechanisms-based model of electrorheological damper. J. Guidance, Control, and Dynamics, 20: 1125-1132.

22.

Klingenberg, D.J. (1993). Simulation of the dynamic oscillatory response of electrorheological suspensions: demonstration of a relaxation mechanism. J. Rheology, 37: 199-214.

23.

Lindler, J. and Wereley, N.M. (1999). Analysis and testing of electrorheological bypass damper. J. Intelligent Material Systems and Structures, 10: 363-376.

24.

Makris, N. , Burton, S.A. , Hill, D. and Jordan, M. (1996). Analysis and design of ER damper for seismic protection of structures. J. Engineering Mechanics, 122: 1003-1011.

25.

Makris, N. , Burton, S.A. and Taylor, D.P. (1996). Electrorheological damper with annular ducts for seismic protection applications. Smart Materials and Structures, 5(5): 551-564.

26.

Marksmeier, T.M. , Wang, E.L. and Gordaninijad, F. (1998). Theoretical and experimental studies of an electro-rheological grease shock absorber. J. Intelligent Material Systems and Structures, 9: 693-703.

27.

McLeish, T.C.B. , Jordan, T. and Shaw, M.T. (1991). Viscoelastic response of electrorheological fluids, I. Frequency dependence. J. Rheology, 35: 427-448.

28.

Onada, J. , Oh, H.-U. and Minesugi, K. (1997). Semiactive vibration suppression with electrorheological-fluid dampers. AIAA Journal, 35: 1844-1851.

29.

Otsubo, Y. , Sekine, M. and Katayama, S. (1992). Electrorheological properties of silica suspensions. J. Rheology, 36: 479-496.

30.

Parthasarathy, M. and Klingenberg, D.J. (1995). A microstructural investigation of the nonlinear response of electrorheological suspensions, II. Oscillatory shear flow. Rheologica Acta, 34: 430-439.

31.

Parthasarathy, M. and Klingenberg, D.J. (1999). Large amplitude oscillatory shear of ER suspensions. J. Non-Newtonian Fluid Mechanics, 81: 83-104.

32.

Phillips, R.W. (1969). Engineering applications of fluids with a variable yield stress. Ph.D. Dissertation, Dept. Mech. Eng., U.C. Berkeley.

33.

Powell, J.A. (1995). Application of a nonlinear phenomenological model to the oscillatory behavior of ER materials. J. Rheology, 39: 1075-1094.

34.

Radhakrishnan, K. and Hindmarsh, A.C. (1993). Description of LSODE, the Livermore solver for ordinary differential equations. Lawrence Livermore National Laboratory Reports, UCRL-ID-113953.

35.

Spencer, B.F., Jr. , Dyke, S.J. , Sain, M.K. and Carlson, J.D. (1997). Phenomenological model for magnetorheological dampers. J. Engineering Mechanics, 123: 230-238.

36.

Sims, N.D. , Stanway, R. , Peel, D.J. , Bullough, W.A. and Johnson, A.R. (1999). Controllable viscous damping: an experimental study of an electrorheological long-stroke damper under proportional feedback control. Smart Materials and Structures, 8: 601-615.

37.

Sims N.D. , Peel, D.J. , Stanway, R. , Johnson, A.R. and Bullough, W.A. (2000). The electrorheological long-stroke damper: a new modelling technique with experimental validation. J. Sound and Vibration, 229(2): 207-227.

38.

Stanway, R. , Sproston, J.L. and Stevens, N.G. (1987). Non-linear modelling of an electro-rheological vibration damper. J. Electrostatics, 20: 167-184.

39.

Wang, X.J. , Zhang, P.Q. , Tang, X. and Tao, R. (1999). Testing and modeling a cone-shaped squeeze-film mode electrorheological damper. J. Intelligent Material Systems and Structures, 10(9): 748-752.