Torsional Actuator and Stepper Motor Based on Piezoelectric d15 Shear Response

Abstract

Two novel devices, torsional actuator and torsional stepper motor, are described and their performance is investigated in detail. Both devices were designed to produce large angular displacement and large torque output from the piezoelectric d ₁₅ shear response. In the torsional actuator, the large displacement can be achieved due to built-in amplification of piezoelectric strain using the aspect ratio of a piezoelectric tube. It is shown that the displacement can be controlled by changing the length of the tube, and that the blocking torque developed is independent of the length. It is also shown that the performance of the actuator does not change under external torque load, and that the prestress in radial direction improves the mechanical strength of the actuator without affecting the produced displacement. In the stepper motor, the unlimited angular displacement of the rotor is produced by accumulating the piezoelectric strain by using a direct coupling mechanism between the stator and the rotor, where a clutch drives the rotor by locking it. The direct coupling makes it possible to transmit the whole power generated in the piezoelectric tube to the rotor, and thus achieve the high efficiency of the motor. Also, the locking mechanism allows smooth motion either in a continuous or stepwise fashion within a 360° interval with a precise control over angular positioning. In addition, the advantage of both devices is their simplicity and a possibility to produce them in the compact package.

Get full access to this article

View all access options for this article.

References

1. Beige, H. and G. Schmidt . 1982. “Electromechanical Resonances for Investigating Linear and Nonlinear Properties of Dielectrics,” Ferroelectrics, 41: 39-49.

2. Berlincourt, D. , D. Curran and H. Jaffe . 1969. Physical Acoustics, v. 1, part A, W. Mason , ed., Academic Press, New York, London, pp. 169-226.

3. Centolanza, L. R. and E. C. Smith . 2000. “Design and Experimental Testing of an Induced-Shear Piezoelectric Actuator for Rotor Blade Trailing Edge Flap,” 41st AIAA Structures, Structural Dynamics, and Materials Conference, Atlanta, GA, April 2000.

4. Chen, Q. , D.-J. Yao , C.-J. Kim and G. P. Carman . 1998. “Development of Mesoscale Actuator Device with Micro Interlocking Mechanism,” J. Intell. Mater. Sys. and Struc., 9: 449-457.

5. Cross, L. E. 1996. “Ferroelectric Ceramics: Materials and Application Issues,” Ceramic Trans., 68: 15-30.

6. Frederick, J. R. 1965. Ultrasonic Engineering, J. Wiley, New York.

7. Galante, T. , J. Frank , J. Bernard , W. Chen , G. A. Lesieutre and G. H. Koopmann . 1998. “Design, Modeling and Performance of a High Force Piezoelectric Inchworm Motor,” SPIE’s Smart Structures and Materials, 3329: 756-767.

8. Glazounov, A. E. , Q. M. Zhang and C. Kim . 1998a. “Piezoelectric Actuator Generating Torsional Displacement from Piezoelectric d15 Shear Response,” Appl. Phys. Lett., 72: 2526-2528.

9. Glazounov, A. E. , Q. M. Zhang and C. Kim . 1998b. “A New Torsional Actuator Based on Shear Piezoelectric Response,” SPIE’s Smart Structures and Materials, 3324: 82-91.

10.

10. Glazounov, A. E. , S. Wang , Q. M. Zhang and C. Kim . 1999. “High Efficiency Piezoelectric Motor Combining Continous Rotation with Precise Control over Angular Positioning,” Appl. Phys. Lett., 75: 862-864.

11.

11. Glazounov, A. E. , S. Wang , Q. M. Zhang and C. Kim . 2000. “Piezoelectric Stepper Motor with Direct Coupling Mechanism to Achieve High Efficiency and Precise Control of Motion,” IEEE Trans. Ultrason., Ferroelect. Freq. Contr., 47: 1059-1067.

12.

12. Jänker, P. , F. Hermle , T. Lorkowski , S. Storm and M. Wettermann . 1998. “Development of High-Performance Piezoelectric Actuators for Transport Systems,” Proc. of Actuator 1998, CD-ROM edition.

13.

13. Kim, C. et al. 1997. “Composite Piezoelectric Assemblies for Torsional Actuators,” NRL/MR/6380-97-7997.

14.

14. Kim, C. , A. E. Glazounov , F. D. Flippen , A. Pattnaik , Q. M. Zhang and D. Lewis III . 1999. “Piezoelectric Ceramic Assembly Tubes for Torsional Actuators,” SPIE’s Smart Structures and Materials, 3675: 53-62.

15.

15. Kim, C. 1999. “Piezoelectric Torsional Vibration Driven Motor,” U.S. Patent Application No. 60/162,527, Navy Case No. 80,131, November, 1999.

16.

16. Koc, B. 1999. Private communication.

17.

17. Koratkar, N. A. and I. Chopra . 1998. “Analysis and Testing of Mach Scaled Helicopter Rotor in Hover with Piezoelectric Bender Actuated Trailing Edge Flaps,” SPIE’s Smart Structures and Materials, 3329: 266-290.

18.

18. Kugel, V. , S. Chadran and L. E. Cross . 1996. “Caterpillar-Type Piezoelectric d33 Bimorph Transducer,” Appl. Phys. Lett., 69: 2021-2023.

19.

19. Mueller, V. and Q. M. Zhang . 1998. “Shear Response of Lead Zirconate Titanate Piezoceramics,” J. Appl. Phys., 83: 3754-3761.

20.

20. Pan, M.-J. , P. Pertsch , S. Yoshikawa , T. R. Shrout and V. Vedula . 1998. “Electroactive Actuator Materials: Investigations on Stress and Temperature Characteristics,” SPIE’s Smart Structures and Materials, 3324: 145-153.

21.

21. Prechtl, E. F. and S. R. Hall . 1997. “Design of a High Efficiency Discrete Servo-Flamp Actuator for Helicopter Rotor Control,” SPIE’s Smart Structures and Materials, 3041: 158.

22.

22. Sugawara, Y. , S. Yoshikawa , Q. Xu , R. E. Newnham and K. Uchino . 1992. “Metal-Ceramic Composite Actuators,” J. Amer. Ceram. Soc., 75: 996-998.

23.

23. Uchino, K. 1997. Piezoelectric Devices and Ultrasonic Motors, Kluwer Academic Publishers, Boston, MA.

24.

24. Ueha, S. and Y. Tomikawa . 1993. Ultrasonic Motors: Theory and Applications, Oxford University Press, Oxford.

25.

25. Wu, C. et al. 1998. “Continuous Poling of PZT Bars,” Proceedings of International Symposium for Manufacturing of Electronic Materials and Components, Amer. Ceram. Soc., pp. 21-31.

26.

26. Zhang, Q. M. , J. Zhao , K. Uchino and J. Zheng . 1997. “Change in the Weak-Field Properties of PbZrTiO3 Piezoceramics with Compressive Uniaxial Stresses and Its Links to the Effect of Dopants on the Stability of the Polarizations in the Materials,” J. Mater. Res., 12: 225-234.

27.

27. Zhang, Q. , L. E. Cross , C. Kim and M. Kahn . 2000. “Torsional Electrostrictive Actuators,” U.S. Patent No. 6,020,674, February, 2000.