A Low-Cost Smart Measurement System for Resistive (Bridge) or Capacitive Sensors

Abstract

A low-cost smart measurement system for resistive (bridge) or capacitive sensors is presented. The measurement system consists of three main parts: the sensor element, a universal transducer interface (UTI) and a microcontroller. The Universal Transducer Interface (UTI) is equipped with front-ends for many types of resistive (bridge) and capacitive sensors. It is a sensor-signal-to-time converter, based on a period-modulated oscillator, which generates a microcontroller-compatible output signal. The microcontroller performs data acquisition of the output signals from the UTI, controls the operating conditions and communicates with a personal computer. Continuous auto-calibration is applied to eliminate the influences of offset and gain errors. According to the experimental results the accuracy and resolution amounts to 13 bits and 16 bits, respectively, for a measurement time of about 100 ms.

Get full access to this article

View all access options for this article.

References

1. Motorola, “Pressure sensors” data book, USA, BR121/D REV 6, 1992.

2. Analog Devices, “Design-in reference manual,” USA, 1994.

3. Crystal, “Crystal semiconductor data acquisition data book,” USA, 1995.

4. F. van der Goes and G. C. M. Meijer , “A novel low-cost capacitive-sensor interface,” IEEE Trans. Instrum. and Meas., vol 45, no. 2, pp. 536-540, Apr. 1996.

5. X. Li , G.W. de Jong , F. N. Toth , F. M. L. van der Goes , G. C. M. Meijer and A.H.M. van Roermund , “Low-cost CMOS interface for capacitive sensors and its application in a capacitive angular encoder,” in Proc. ET’96, Sofia, Bulgaria, Sept. 1996,

6. F. van der Goes, “Low-cost sensor interfacing,” Ph.D. thesis, Delft University of Technology, Apr. 1996.

7. Smartec B. V. “Universal transducer interface,” application note version 2.2. Breda, The Netherlands, Oct. 1998.

8. G. C. M. Meijer , J. van Drecht , P. C. de Jong and H. Neuteboom , “New concepts for smart signal processors and their application to PSD displacement transducers,” Sensors and Actuators A, 35, pp. 23-30, 1992.