This paper describes the process for the development of a mathematical model for an in situ uranium leaching method. A phased modelling process in MATLAB is conducted from the injection well to the ore body and from the ore body to the extraction well. Then a parametric identification of the injection and extraction wells is made, as well as the ore body itself. In addition, the hydraulic-resistance dependence of the bottom-hole zone on the flow rate of an injected solution in an injection well is determined and a technique is suggested for determination of the flow-pressure characteristics of the extraction well.
BecherkinSG, BakhurovIVG, LutsenkoK.1968. Underground leaching of uranium from low-grade in situ ores.J Soviet Atom Energy. 2:154–159. doi:10.1007/BF01114181.
2.
BommerPM, SchechterRS.1979. Mathematical modeling of in-situ uranium leaching.J Soc Petrol Eng. 19:393–401. doi:10.2118/7533-PA.
3.
ByerleyJJ, ScharerJM, CharlesAM.1987. Uranium (VI) biosorption from process solutions.Biochem Eng J. 36:B49–B59. doi:10.1016/0300-9467(87)80031-X.
4.
ChunhuZ.2008. Numerical simulation in a test field of in-situ leaching of uranium.J Geotechn Invest Survey. 7:27–31.
5.
DekuanZ, YixuanY.1994. A new method of reserve calculation of uranium deposits for in situ leaching.J Uran Min Metall. 1:1–7.
6.
DzhakishevM.2004. Uranium production in Kazakhstan as a potential source for covering the world uranium shortage. World Nuclear Association Annual Symposium - London. p. 1–17.
7.
FyodorovGV.2002. Uranium production and the environment in Kazakhstan, Vol. 33. International Atomic Energy Agency (IAEA-CSP–10/P). p. 191–198.
8.
International Atomic Energy Agency.2016. In situ leach uranium mining: an overview of operations. Nuclear Energy Series – Vienna No. NF-T-1.4 (IAEA).
9.
KumarJR, KimJS, LeeJY, YoonHS.2011. A brief review on solvent extraction of uranium from acidic solutions.J Separat Purif Rev. 40:77–125. doi:10.1080/15422119.2010.549760.
10.
PanfilovM, UralbekovB, BurkitbayevM.2016. Reactive transport in the underground leaching of uranium: Asymptotic analytical solution for multi-reaction model.J Hydrometall. 160:60–72. doi:10.1016/j.hydromet.2015.11.012.
11.
PastukhovAM, RychkovVN, SkripchenkoSY.2015. Thermodynamic modeling of the in situ leaching of uranium.J Radioanal Nucl Chem. 303:2053–2057. doi:10.1007/s10967-014-3722-9.
12.
PastukhovAM, SkripchenkoSY.2017. The effect of sulphide minerals on uranium oxidation state in in-situ leaching.J AIP Conf Proc. doi:10.1063/1.5002932.
13.
PelizzaMS, BartelsCS.2016. 7 - Introduction to uranium in situ recovery technology.J Uran Nucl Power. 157–213. doi:10.1016/B978-0-08-100307-7.00007-7.
14.
LuntD, BoshoffP, BoylettM, El-AnsaryZ.2007. Uranium extraction: the key process drivers.J Southern African Inst Min Metall. 107:419–426.
15.
MinggaoC, XiaofeiJ.1995. Geological characteristics and prospective assessment of in-situ leaching sandstone type uranium deposit.J Uran Geol. 1:11–18.
16.
MukhanovBK, OmirbekovaZZ, UsenovAK, WójcikW.2014. Simulating in-situ leaching process using Comsol multiphysics.Int J Electron Telecommun. 60:213–217. doi:10.2478/eletel-2014-0026.
NguyenVV, PinderGF, GrayWG, BothaJF.1983. Numerical simulation of uranium in-situ mining.J Chem Eng Sci. 38:1855–1862. doi:10.1016/0009-2509(83)85041-6.
19.
YazikovV.2002. Uranium raw material base of the Republic of Kazakhstan and prospects of using in situ leach mining for its development, Vol. 42. International Atomic Energy Agency (IAEA-T1-TC–975). p. 22–31.
