This article reviews the principles and methods for formulating mathematical or physical models that are useful in the design, analysis and optimization of metallurgical processes. Mathematical models based on first principles are emphasised. Examples of developing new processes based on a first-principle mathematical model or a physical model are presented. Cautions and pitfalls associated with the formulation and application of mathematical models are discussed. The reader is encouraged to carefully examine correctness of the approach and assumptions made in the formulation in order to avoid an erroneous application of a model. For complex processes requiring harsh conditions, physical models are useful. The interpretation and utilisation of the results from physical models can be difficult and sometimes even misleading. This problem is greatly assuaged by combining physical modelling with mathematical modelling. For example, the use of computational fluid dynamics greatly improves the physical modelling of systems involving complex fluid flow.
BalakrishnanAR, PeiDCI.1979. Heat transfer in gas-solid packed bed systems. 1. A critical review. Ind Eng Chem Process Des Dev. 18:30–40.
3.
BirdRB, StewartWE, LightfootEN.2002. Transport phenomena. 2nd ed.New York: Wiley.
4.
BischoffKB.1963. Accuracy of the pseudo steady state approximation for moving boundary diffusion problems. Chem Eng Sci. 18:711–713.
5.
BischoffKB.1965. Further comments on the pseudo steady state approximation for moving boundary diffusion problems. Chem Eng Sci. 20:783–784.
6.
BlumbergR.1988. Liquid–liquid extraction. New York: Academic Press.
7.
BockrisJO'M, ReddyAKN.1970. Modern electrochemistry. Vols. 1 and 2. New York: Plenum.
8.
BraunA, WarzechaM, PfeiferH.2010. Numerical and physical modeling of steel flow in a two-strand Tundish for different casting conditions. Metall Mater Trans B. 41B:549–559.
9.
ChangJS, SohnHY.2012. The penetration behavior of an annular gas-solid jet impinging on a liquid bath: the effects of the density and size of solid particles. Metall Mater Trans B. 43B:787–813. doi: 10.1007/s11663-012-9648-0.
ChaubalPC, NagamoriM.1982. Volatilization of bismuth in copper matte converting —computer simulation. Metall Trans B. 13B:339–348.
12.
ChaubalPC, NagamoriM.1988. Thermodynamics for arsenic and antimony in copper matte converting—computer simulation. Metall Trans B. 19B:547–556.
13.
ChaubalPC, NagamoriM, SohnHY.1984. Volatilization and slagging of lead in copper matte converting: computer simulation. Can Metall Quart. 23:405–411.
14.
ChaubalPC, SohnHY.1986. Intrinsic kinetics of the oxidation of chalcopyrite particles under isothermal and non–isothermal conditions. Metall Trans B. 17B:51–60.
15.
ChaubalPC, SohnHY, GeorgeDB, BaileyLK.1989. Mathematical modeling of minor element behavior during flash smelting of copper concentrates and flash converting of copper mattes. Metall Trans B. 20B:39–51.
16.
ChibweDK, AkdoganG, AldrichC, TaskinenP.2013. Modelling of mixing, mass transfer and phase distribution in a Peirce–Smith converter model. Can Metall Quart. 52:176–189.
17.
ChibweDK, AkdoganG, EksteenJ.2011. Solid-liquid mass transfer in a Peirce-Smith converter: a physical modelling study. Metall Min Ind. 3(5):202–210.
18.
ColemanR, LambergP.2010. Flotation circuit optimisation using modelling and simulation software. Outotec Australia's Quarterly e-newsletter, August; p. 1–4.
19.
CwudzińskiA.2014. Numerical and physical modeling of liquid steel active flow in Tundish with subflux turbulence controller and dam. Steel Res Int. 85:902–917. doi: 10.1002/srin.201300284.
20.
DussoubsB, JourdeJ, PatissonF, HouzelotJ-L, AblitzerD.2003a. Modelling of a moving bed furnace for the production of uranium tetrafluoride Part 1: formulation of the model. Chem Eng Sci. 58:2617–2627.
21.
DussoubsB, JourdeJ, PatissonF, HouzelotJ-L, AblitzerD.2003b. Modelling of a moving bed furnace for the production of uranium tetrafluoride. Part 2: application of the model. Chem Eng Sci. 58:2629–2642.
22.
DussoubsB, JourdeJ, PatissonF, HouzelotJL, AblitzerD.2002. Mathematical modelling of uranium dioxide conversion in a moving bed furnace. Powder Technol. 128:168–177.
23.
DymentJ, MantralaV.2015. Jump start: getting started with Aspen Plus® v8 a brief tutorial. Aspen Technology.
24.
DyussekenovN, SohnHY, ParkSS.2011. The penetration behavior of an annular gas-solid jet impinging on a liquid bath: effect of the annular cross-sectional area. Miner Process Extr Metall (Trans Inst Min Metall C). 120:21–31.
25.
EdwardsMF, RichardsonJF.1968. Gas dispersion in packed beds. Chem Eng Sci. 23:109–123.
26.
FabritiusT, KupariP, HärkkiJ.2001. Physical modelling of a sidewall-blowing converter. Scand J Metall. 30:57–64.
27.
FranclJ, KingergyWD.1954. Thermal conductivity: IX, experimental investigation of effect of porosity on thermal conductivity. J Amer Ceram Soc. 37:99–107.
GuoD, IronsGA.2000. Modeling of gas-liquid reactions in ladle metallurgy: Part I. Physical modeling. Metall Mater Trans B. 31B:1447–1455.
30.
GuptaCK, SathiyamoorthyD.1999. Fluid bed technology in materials processing. Boca Raton (FL): CRC Press.
31.
HagenKD.1999. Heat transfer with applications. Upper Saddle River (NJ): Prentice-Hall.
32.
HahnYB, SohnHY.1990a. Mathematical modeling of sulfide flash smelting process: Part I. Model development and verification with laboratory and pilot–plant measurements for chalcopyrite concentrate smelting. Metall Trans B. 21B:945–958.
33.
HahnYB, SohnHY.1990b. Mathematical modeling of sulfide flash smelting process: Part II. Quantitative analysis of radiative heat transfer. Metall Trans B. 21B:959–966.
34.
HimmelblauDM, RiggsJB.2004. Basic principles and calculations in chemical engineering. Upper Saddle River (NJ): Prentice-Hall.
ItagakiK.1986. Thermodynamic evaluation of distribution behaviour of VA elements and effect of the use of oxygen in copper smelting. Metall Rev MMIJ. 3(3):87.
37.
ItagakiK, YazawaA.1983. Thermodynamic evaluation of distribution behaviour of arsenic, antimony and bismuth in copper smelting. In: SohnHY, GeorgeDB, ZunkelAD, editors. Advances in sulfide smelting, vol. 1, basic principles. Warrendale (PA): TMS-AIME; p. 119–142.
38.
IyerKM, SohnHY.1994. Physical and mathematical modeling of pyrometallurgical channel reactors with bottom gas injection: residence time distribution analysis and ideal–reactor–network model. Metall Mater Trans B. 25B:207–219.
39.
KavianyM.2002. Principles of heat transfer. New York: Wiley.
40.
KawasakiE, SanscrainteI, WalshTI.1962. Kinetics of reduction of iron oxide with carbon monoxide and hydrogen. AIChE J. 8:48–62.
41.
KelloggHH.1967. A computer model of the slag-fuming process for recovery of zinc oxide. Trans TMS-AIME.239:1439.
42.
KennedyMW.2014. Metallurgical plant optimization through the use of flowsheet simulation modelling, in celebrating the Megascale. In: Mackey PJ et al., editors. Proceedings of the extraction and processing division symposium on pyrometallurgy, 143rd TMS Annual Meeting; San Diego (CA), Hoboken (NJ): TMS/Wiley. p. 367–375.
43.
KhajaviLT, BaratiM.2010. Cold model study of emulsification behavior in bottom blown metallurgical baths covered with thick slag. ISIJ Int. 50:654–662.
44.
KimHG, SohnHY.1996. Thermodynamic modelling of minor–element behavior in in–bath copper smelting and converting with calcium ferrite slag. Trans Inst Mining Metall Sec C. 105:C151–C163.
45.
KimHG, SohnHY.1997. Minor–element behavior and iron partition during the cleaning of copper converter slag under reducing conditions. Can Metall Quart. 36:31–37.
46.
KimHG, SohnHY.1998. Minor–element behaviour in copper smelting and converting with the use of tonnage oxygen. Trans Inst Mining Metall Sec C. 107:C43–C59.
47.
KnackeO, KubaschewskiO, HasselmanK.1991. Thermochemical properties of inorganic substances. Berlin: Springer-Verlag.
KuniiD, LevenspielO.1968. Bubbling bed model for kinetic processes in fluidized beds. Gas-solid mass and heat transfer and catalytic reactions. Ind Eng Chem Process Des Develop.7:481–492.
LaddhaGS, DegaleesanTE.1978. Transport phenomena in liquid extraction, 209. New York: McGraw–Hill.
52.
LeeMS, SohnHY.1996. Dispersed–phase holdup in liquid–liquid emulsions generated by high–strength bottom gas injection. Metall Mater Trans B. 27B:213–219.
53.
LevenspielO, KuniiD, FitzgeraldT.1968. The processing of solids of changing size in bubbling fluidized beds. Powder Technol. 2:87–96.
54.
LiL, LiuZ, LiB, MatsuuraH, TsukihashiF.2015. Water model and CFD-PBM coupled model of gas-liquid-slag three-phase flow in ladle metallurgy. ISIJ Int. 55:1337–1346.
55.
LinHK, SohnHY.1987. Mixed–control kinetics of oxygen leaching of chalcopyrite and pyrite from porous primary ore fragments. Metall Trans B. 18B:497–504.
56.
LiuZ, LiL, LiB.2017. Modeling of gas-steel-slag three-phase flow in ladle metallurgy: Part I. Physical modeling. ISIJ Int. 57:1971–1979.
57.
LoTC, BairdMHI, HansonC, editors. 1983. Handbook of solvent extraction. New York: Wiley.
58.
MakkawiYT, OconeR.2011. In Mass transfer in multiphase systems and its applications. El-Amin M, editor. Rijeka (Croatia): InTech, p. 525. http://cdn.intechweb.org/pdfs/13548.pdf.
59.
MasonEA, MalinauskasAP, EvansRB.1967. Flow and diffusion of gases in porous Media. J Chem Phys. 46:3199–3216.
60.
MasonEA, MarreroTR.1970. The diffusion of atoms and molecules. Adv Atom Mol Phys.6:155–232.
61.
MazumdarD, YamanogluG, GuthrieRIL.1997. Hydrodynamic performance of steelmaking tundish systems: a comparative study of three different Tundish designs. Steel Res Int. 68:293–300. doi: 10.1002/srin.199701792.
62.
McKewanWM.1960. Kinetics of iron oxide reduction. Trans Metall Soc AIME. 218:2–6.
MerderT, PieprzycaJ.2012. Optimization of two-strand industrial Tundish work with use of turbulence inhibitors: physical and numerical modeling. Steel Res Int. 83:1029–1038. doi: 10.1002/srin.201200059.
65.
ModestMF.2013. Radiative heat transfer. 3rd ed. New York: Academic Press.
66.
MolerusO, WirthKE.1997. Heat transfer in fluidized beds. Volume 11 of Particle Technology Series. Springer. 187 p.
67.
NagamoriM, ChaubalPC.1982a. Thermodynamics of copper matte converting: Part III. Steady-state volatilization of Au, Ag, Pb, Zn, Ni, Se, Te, Bi, Sb, and As from slag, matte, and metallic copper. Metall Trans B. 13B:319–329.
68.
NagamoriM, ChaubalPC.1982b. Thermodynamics of copper matte converting: Part IV. A priori predictions of the behavior of Au, Ag, Pb, Zn, Ni, Se, Te, Bi, Sb, and As in the noranda process reactor. Metall Trans B. 13B:331–338.
69.
NagamoriM, MackeyPJ, TarassoffP.1975. Copper solubility in FeO−Fe2O3−SiO2−Al2O3 slag and distribution equilibria of Pb, Bi, Sb and As between slag and metallic copper. Metall Trans B. 6B:295–301.
70.
NatererGF.2003. Heat transfer in single and multiphase systems. Boca Raton (FL): CRC Press.
PankratzLB, StuveJM, GokcenNA.1984. Thermodynamic data for mineral technology. U.S. Department of the Interior, Bureau of Mines Bulletin 677.
75.
ParkSS, DyussekenovN, SohnHY.2010. The penetration behavior of an annular gas-solid jet impinging on a liquid bath: comparison with a conventional circular jet. Metall Mater Trans B. 41:51–62. doi: 10.1007/s11663-009-9310-7.
PatissonF, DussoubsB, AblitzerD.2006. In: Kongoli F, Reddy RG, editors. Sohn international symposium, advanced processing of metals and materials, vol. 1 – thermo and physicochemical principles: non-ferrous high-temperature processing. Warrendale (PA): TMS (The Minerals, Metals & Materials Society); p. 141.
78.
PaulBC, SohnHY, McCarterMC.1992. Model for ferric sulfate leaching of copper ores containing a variety of sulfide minerals: Part I. Modeling uniform size ore fragments. Metall Trans B. 23B:537–548.
79.
Perez-TelloM, SohnHY, SmithPJ.2001b. Experimental investigation and 3-D computational fluid dynamics modeling of the flash converting furnace shaft: Part II. Formulation of 3-D computational fluid dynamics model incorporating the particle cloud description. Metall Mater Trans B. 32B:869–886. http://www.springerlink.com/content/t410n51752354780/fulltext.pdf.
80.
Perez-TelloM, SohnHY, St. MarieK, JokilaaksoA.2001a. Experimental investigation and 3-D computational fluid dynamics modeling of the flash converting furnace shaft: Part I. Experimental observation of copper converting reactions in terms of converting rate, converting quality, changes in particle size, morphology, and mineralogy. Metall Mater Trans B. 32B:847–868. http://www.springerlink.com/content/j3h8(582876782u7/fulltext.pdf.
81.
PetrovicLJ, ThodosG.1968. Mass transfer in flow of gases through packed beds. Low reynolds number region. Ind Eng Chem Fundam. 7:274–280.
PinegarHK, MoatsMS, SohnHY.2012. Flow sheet development, process simulation and economic feasibility analysis for a novel suspension ironmaking technology based on natural gas: Part I. Flow sheet and simulation for ironmaking with reformerless natural gas. Ironmaking Steelmaking. 39:398–408. www.ingentaconnect.com/content/maney/ias.
84.
PinegarHK, MoatsMS, SohnHY.2013a. Flow sheet development, process simulation and economic feasibility analysis for a novel suspension ironmaking technology based on natural gas: Part II. Flow sheets and simulation for ironmaking combined with steam-methane reforming. Ironmaking Steelmaking. 40:32–43. http://www.ingentaconnect.com/content/maney/ias.
85.
PinegarHK, MoatsMS, SohnHY.2013b. Flow sheet development, process simulation and economic feasibility analysis for a novel suspension ironmaking technology based on natural gas: Part III: economic feasibility analysis. Ironmaking Steelmaking. 40:44–49. http://www.ingentaconnect.com/content/maney/ias.
86.
PolingBE, PrausnitzJM, O’ ConnellJ.2001. The properties of gases and liquids. New York: McGraw-Hill. doi: 10.1036/0070116822.
87.
QueneauPE.1989. The QSL reactor for lead and its prospects for Ni, Cu and Fe. JOM. 41(12):30–35. doi: 10.1007/BF03220844.
88.
QueneauPE, SiegmundA.1996. Industrial-scale leadmaking with the QSL continuous oxygen converter. JOM. 48(4):38–44. doi: 10.1007/BF03222918.
89.
RajamaniK, SohnHY.1983. Kinetics and sulfur fixation in the reduction or oxidation of metal sulfides mixed with lime. Metall Trans B. 14B:175–180.
90.
RanzWE, MarshallWRJr.. 1952. Evaporation from drops. Parts I & II. Chem Eng Prog. 48(-):141–146. 173–180.
91.
RicciL, editor. 1980. Separation techniques: I. Liquid–liquid systems. New York: McGraw-Hill.
92.
RoglerJP, HeaslipLJ, MehrvarM.2005. Physical modelling of inclusion removal in a Tundish by gas bubbling. Can Metall Quart. 44(3):357–368. doi: 10.1179/cmq.2005.44.3.357.
93.
RosnerDE.2000. Transport processes in chemically reacting flow systems. Mineola (NY): Dover.
94.
RowePN, ClaxtonKT.1965. Heat and mass transfer from a single sphere to a fluid flowing through an array. Trans Inst Chem Eng43:231–331.
95.
RumbleJ, editor. 2017. CRC handbook of chemistry and physics. 98th ed.Boca Raton (FL): CRC Press. doi: 10.1201/b21257.
96.
SelmanJR, TobiasCW.1978. Mass-transfer measurements by the limiting-current technique. Adv Chem Eng. 10:211–318.
97.
SeoKW, SohnHY.1991. Mathematical modeling of sulfide flash smelting process: Part III. Volatilization of minor elements. Metall Trans B. 22B:791–799.
98.
SethBBL, RossHU.1966. Application of a generalized rate equation to the gaseous reduction of iron oxide. Can Metall Quart. 5:315–328.
99.
ShengYY, IronsGA.1995. The impact of bubble dynamics on the flow in plumes of ladle water models. Metall Mater Trans B. 26:625–635.
100.
SoepriyantoS, OlsonFA, SohnHY.1989. The selective oxidation of mixed metal sulfides with lime in the presence of steam without emitting sulfur–containing pollutants. Metall Trans B. 20B:237–242.
101.
SohnHY.1978. The law of additive reaction times in fluid–solid reactions. Metall Trans B. 9B:89–96.
102.
SohnHY.1991. The 1990 extractive metallurgy lecture of TMS–AIME: the coming-of–age of process engineering in extractive metallurgy. Metall Trans B. 22B:737–754.
103.
SohnHY.1997. Continuous solvent extraction with bottom gas injection. U.S. Patent No. 5, 641, 462, June 24.
SohnHY.2004b. The effects of reactant starvation and mass transfer in the rate measurement of fluid-solid reactions with small equilibrium constants. Chem Eng Sci. 59:4361–4368.
106.
SohnHY.2007. Suspension ironmaking technology with greatly reduced energy requirement and CO2 emissions. Steel Times Int. 31(3):68–72.
107.
SohnHY.2014. From sulfide flash smelting to a novel flash ironmaking technology. In: PJ Mackey et al., editors. Keynote paper in celebrating the megascale: EPD symposium on pyrometallurgy in honor of David G. C. Robertson, 2014, 143rd TMS Annual Meeting, San Diego (CA), Hoboken (NJ): TMS/Wiley; p. 69–76.
108.
SohnHY, AboukheshemMB.1992. Gas–solid reaction–rate enhancement by pressure cycling. Metall Trans B. 23B:285–294.
109.
SohnHY, BaekHD.1989. The mixed–control kinetics of ferric chloride leaching of galena. Metall Trans B. 20B:107–110.
110.
SohnHY, BascurO.1982. Effect of bulk flow due to volume change in gas phase on gas–solid reactions: initially porous solids. Ind Eng Chem Process Des Dev. 21:658–663.
111.
SohnHY, BraunRL.1980. Simultaneous fluid–solid reactions in porous solids: reactions between one solid and two fluid reactants. Chem Eng Sci. 35:1625–1635.
112.
SohnHY, BraunRL.1984. Simultaneous fluid–solid reactions in porous solids—II. Reactions between one fluid and two solid reactants. Chem Eng Sci. 39:21–30.
113.
SohnHY, ChaubalPC.1984. Rate enhancement of the gaseous reduction of iron oxide pellets by pressure cycling. Trans Iron Steel Inst Japan. 24:387–395.
114.
SohnHY, ChaubalPC.1986. Approximate closed–form solutions to various model equations for fluid–solid reactions. AIChE J32:1574–1578.
115.
SohnHY, ChoiME, ZhangY, RamosJE.2009. Suspension reduction technology for ironmaking with low CO2 emission and energy requirement. Iron Steel Technol (AIST Trans). 6(8):158–165.
116.
SohnHY, DoungdeethaveeratanaD.1998. A novel solvent extraction process with bottom gas injection without moving parts. Sep Purif Technol. 13:227–235.
117.
SohnHY, KimD.1984. The law of additive reaction times applied to the hydrogen reduction of porous nickel–oxide pellets. Metall Trans B. 15B:403–406.
118.
SohnHY, KimD.1987. Kinetics of zinc oxide formation from zinc sulfide by reaction with lime in the presence of water vapor. Metall Trans B. 18B:727–732.
119.
SohnHY, KimD.1988. Kinetics of oxidation of MoS2 by CaO in the presence of water vapor. Metall Trans B. 19B:973–975.
120.
SohnHY, Olivas-MartinezM.2014. Methods for calculating energy requirements for processes in which a reactant is also a fuel – need for standardization. JOM. 66(9):1557–1564. doi: 10.1007/s11837-014-1120-y.
SohnHY, RajamaniK.1977. Successive gas–solid reactions in a porous pellet: application to the reaction of metal sulfides in the presence of lime. Chem Eng Sci. 32:1093–1101.
123.
SohnHY, SeoKW.1990. In multiphase transport and particulate phenomena, Vol. 3. Veziroglu TN, editor. Proceedings of the 5th Miami Int. Symp. on Multi–Phase Transport and Particulate Phenomena; December 12–14, 1988; Miami Beach (FL), New York: Hemisphere Publishing Corp. p. 501–542.
124.
SohnHY, SeoKW, ChaubalPC, HahnYB.1988. Laboratory studies on the flash smelting of copper concentrate. In: Robertson DGC, Sohn HY, Themelis NJ, editors. Flash reaction processes, proceedings of the 1988 center for pyrometallurgy conference, Salt Lake City, Utah, June 15–17, 1988; published by the Center for Pyrometallurgy, Univ. of Missouri–Rolla, Rolla, Missouri. p. 145–166.
125.
SohnHY, SohnH-J.1980. The effect of bulk flow due to volume change in the gas phase on gas–solid reactions: initially nonporous solids. Ind Eng Chem Process Des Dev. 19:237–242.
126.
SohnHY, SzekelyJ.1972. A structural model for gas–solid reactions with a moving boundary—III. A generalized dimensionless representation of the irreversible reaction between a porous solid and a reactant gas. Chem Eng Sci. 27:763–778.
127.
SohnHY, SzekelyJ.1973. Reactions between solids through gaseous intermediates—I. Reactions controlled by chemical kinetics. Chem Eng Sci28:1789–1801.
128.
SohnHY, SzekelyJ.1974. The effect of intragrain diffusion on the reaction between a porous solid and a gas. Chem Eng Sci29:630–634.
129.
SohnHY, WallDR.1989. Application of the law of additive reaction times to the regeneration of coked catalyst pellets. Chem Eng Sci44:442–444.
130.
SohnHY, WonS.1985. Successive gas–solid reaction model for the hydrogen reduction of cuprous sulfide in the presence of lime. Metall Trans B. 16B:645–661.
131.
SohnHY, XiaY-N.1986. Effect of nonuniform distribution of solid reactant on fluid–solid reactions. 1. Initially nonporous solids. Ind Eng Chem Process Des Dev. 25:386–394.
132.
SohnHY, XiaY-N.1987. Effect of nonuniform distribution of solid reactant on fluid–solid reactions. 2. Porous solids. Ind Eng Chem Research. 26:246–254.
133.
SohnHY, ZhouL, ChoK.1998. Intrinsic kinetics and mechanism of rutile chlorination by CO + Cl2 mixtures. Ind Eng Chem Res. 37:3800–3805.
134.
Solorio-DiazG, Ramos-BanderasA, BarretoJdJ, MoralesRD.2007. Fluid dynamics of vortex formation in Tundish operations: physical modelling. Steel Res Int. 78:248–253.
135.
SparrowEM, CessRD.1978. Radiation heat transfer. Washington (DC): Hemisphere Publishing.
136.
SpencerS, ScribaHW.Best practices in process simulation for design of complex metallurgical plants. In Metallurgical Plant Design and Operating Strategies (MetPlant 2008), 18–19 August 2008; Perth, Western Australia. p. 175–206.
137.
St. ClairHW.1965. Rate of reduction of an oxide sphere in a stream of reducing gas. Trans Metall Soc AIME. 233:1145–1152.
138.
StullDR, ProphetH.1971. JANAF thermochemical tables. 2nd ed., Defense Technical Information Center, Fort Belvoir, Virginia, and subsequent supplements.
139.
SutaloID, HarrisJA, JorgensenFRA, GrayNB.1998a. Modeling studies of fluid flow below flash-smelting burners including transient behavior. Metall Mater Trans B. 29B:773–784.
140.
SutaloID, JorgensenFRA, GrayNB.1998b. Experimental and mathematical investigation of the fluid flow inside and below a 1/4 scale air model of a flash smelting burner. Metall Mater Trans B. 29B:993–1006.
141.
SuzukiY, SuenagaC, OgasawaraM, YasudaY.1998. In sulfide smelting ‘98, current and future practices. Asteljoki JA, Stephens RL, editors. Warrendale (PA): TMS. p. 587.
142.
SzekelyJ, EvansJW, SohnHY.1976. Gas-solid reactions. New York: Academic Press.
143.
SzekelyJ, SohnHY.1973. The effect of structure on the reaction between a porous solid and a gas. Trans Inst Mining Metall Sec C. 82:C92–C100.
144.
ThemelisNJ, GauvinWH.1963. A generalized rate equation for the reduction of iron oxides. Trans Metall Soc AIME. 227:290–300.
145.
TimmelK, ShevchenkoN, RöderM, AnderhuberM, GardinP, EckertS, GerbethG.2015. Visualization of liquid metal two-phase flows in a physical model of the continuous casting process of steel. Metall Mater Trans B. 46:700–710.
146.
Torres-AlonsoE, MoralesRD, Garcia-HernandezS, Palafox-RamosJ.2010. Cyclic turbulent instabilities in a thin slab mold. Part I: physical model. Metall Mater Trans B. 41B:583–597.
147.
WakaoN, FunazkriT.1978. Effect of fluid dispersion coefficients on particle-to-fluid mass transfer coefficients in packed beds. Chem Eng Sci. 33:1375–1384.
148.
WakaoN, KagueiS.1982. Heat and mass transfer in packed beds. New York: Gordon and Breach.
149.
WangM, WangJ, PanN, ChenS.2007. Mesoscopic predictions of the effective thermal conductivity for microscale random porous media. Phys Rev E. 75: 036702 _2007-1∼10. http://ningpan.net/Publications/101-150/127.pdf.
150.
WarzechaM, MerderT, PfeiferH, PieprzycaJ.2010. Investigation of flow characteristics in a six-strand CC Tundish combining plant measurements, physical and mathematical modeling. Steel Res Int. 81:987–993. doi: 10.1002/srin.201000189.
151.
WeastRC.1999. CRC handbook of chemistry and physics. Bocca Raton (FL): CRC Press.
152.
WhitakerS.1972. Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and for flow in packed beds and tube bundles. AIChE J. 18:361–371.
153.
WhiteFM.1988. Heat and mass transfer. Reading (MA): Addison-Wesley.
154.
XuX, BrooksGA, YangW.2010. Online analysis of stirring processes in ladle metallurgy. Metall Mater Trans B. 41B:1025–1032.
155.
YamanogluG, GuthrieRIL, MazumdarD.1999. Study of powder injection into water using an on-line particle detection system. Can Metall Quart. 38:61–80.
156.
YasudaY, SohnHY.1995. Experimental and theoretical study of particle dispersion phenomena in a turbulent gas jet of the flash–smelting process by the image analysis technique. Metall Mater Trans B. 26B:637–646.
157.
YawsCL.1995. Handbook of transport property data. Rugby: Inst. of Chemical Engineers.
158.
YawsCL.2003. Yaws’ handbook of thermodynamic and physical properties of chemical compounds. New York: Knovel (Elsevier).
159.
YawsCL.2015. Transport properties of chemicals and hydrocarbons. 2nd ed. Oxford: Elsevier.
160.
ZaidiA, SohnHY.1995. Measurement and correlation of drop–size distribution in liquid–liquid Emulsions formed by high–velocity bottom gas injection. ISIJ Int. 35:234–241.
161.
ZhengSG, ZhuMY.2006. Optimisation of baffles in six strand round bloom continuous casting tundish: a physical modelling study. Ironmaking Steelmaking. 33:398–406.
162.
ZhouX, ErssonM, ZhongL, YuJ, JönssonP.2014. Mathematical and physical simulation of a top blown converter. Steel Res Int. 85:273–281. doi: 10.1002/srin.201300310.
163.
ZhouL, SohnHY.1996. Mathematical modeling of fluidized Bed chlorination of rutile. AIChE J. 42:3102–3112.
