Praseodymium-Magnesium (Pr-Mg) alloys of different compositions were prepared by molten salt electrolysis using PrCl3-MgCl2-KCl electrolyte. The effect of electrolytic composition on current efficiency and alloy composition was investigated in this study. The different phases of Pr-Mg alloys obtained from varying the composition of electrolyte were characterised by X-ray diffraction, Scanning Electron Microscopy and Inductively Coupled Plasma-Atomic Emission Spectroscopy techniques. It is evident from this study that both phase and composition of Pr-Mg alloy can be controlled by varying the concentration of PrCl3 and MgCl2 in the electrolyte. The operational parameters were standardised to get maximum current efficiency and yield. A maximum current efficiency of 85% and yield of 89% was obtained by operating the cell under optimum conditions.
AlamME, HanS, NguyenQB, HamoudaAMS, GuptaM.2011. Development of new magnesium based alloys and their nanocomposites. J Alloys Compd. 509(34):8522–8529. doi: 10.1016/j.jallcom.2011.06.020
2.
ErricoFD, PlazaG, GigerF, KimSK.2013. Final assessment of preindustrial solid-state route for high performance Mg-system alloys production: Concluding EU green metallurgy project. JOM. 65(10):1293–1302. doi: 10.1007/s11837-013-0705-1
3.
FengL, GuoC, TangD.1996. Relationship between dissolution behavior and current efficiencies of La, Ce, Pr and Nd in their chloride molten salts. J Alloys Compd. 234:183–186. doi: 10.1016/0925-8388(95)02025-X
4.
GrayJE, LuanB.2002. Protective coatings on magnesium and its alloy – a critical review. J Alloys Compd. 336(1–2):88–113. doi: 10.1016/S0925-8388(01)01899-0
5.
GroultH, GhallaliHE, BarhounA, BriotE, PerrigaudL, HernandorenaS, LantelmeF.2010. Preparation of Co–Sn alloys by electroreduction of Co(II) and Sn(II) in molten LiCl–KCl. Electrochim Acta. 55(6):1926–1932. doi: 10.1016/j.electacta.2009.11.010
6.
HanW, ZhangY, YeK, YanY, ZhangM.2010. Electrochemical co-deposition of quaternary Mg-Li-Ce-La alloys from molten salt. Metall Mater Trans B. 41:1123–1128. doi: 10.1007/s11663-010-9395-z
7.
IidaT, NohiraT, ItoY.2003. Electrochemical formation of Sm–Co alloys by codeposition of Sm and Co in a molten LiCl–KCl–SmCl3–CoCl2 system. Electrochim Acta. 48(17):2517–2521. doi: 10.1016/S0013-4686(03)00293-7
8.
KojimaY.2001. Project of platform science and technology for advanced magnesium alloys. Mater Trans. 42(7):1154–1159. doi: 10.2320/matertrans.42.1154
9.
LuY, WangQ, ZengX, DingW, ChunquanZ, YanpingZ.2000. Effects of rare earths on the microstructure, properties and fracture behavior of Mg–Al alloys. Mater Sci Eng A. 278(1–2):66–76. doi: 10.1016/S0921-5093(99)00604-8
10.
LuoJ, QiuK, WangJ, DongX, LiF.2012. Microstructure and mechanical properties of Mg7Zn3Al alloy with Nd and Y additions. J Rare Earths. 30(5):486–491. doi: 10.1016/S1002-0721(12)60077-5
11.
MengJ, FangD, ZhangD, ShenJ, TangD, ZhangH.2010. Method for producing Magnesium-lanthanum praseodymium cerium intermediate alloy. US patent 7744814 B2.
SahooDK, AnithaM, MondalS, SinghDK, MishraR, KainV.2017. Taguchi optimisation of process parameters for electrowinning of praseodymium metal in molten salt electrolysis. Min Proc Extractive Metall. 126(4):231–237. doi: 10.1080/03719553.2016.1234813
16.
SahooDK, MishraR, SinghH, KrishnamurthyN.2014a. Determination of thermodynamic stability of lanthanum chloride hydrates (LaCl3⋅xH2O) by dynamic transpiration method. J Alloys Compd. 588:578–584. doi: 10.1016/j.jallcom.2013.11.115
17.
SahooDK, SinghH, KrishnamurthyN.2014b. Electrochemical deposition of La-Mg alloys in LaCl3-MgCl2-KCl system with molten salt electrolysis process. J Min Metall Sect B-Metall. 50(2):109–114. doi: 10.2298/JMMB130214013K
18.
SahooDK, SinghH, KrishnamurthyN.2013. Current efficiency in electro-winning of lanthanum and cerium metals from molten chloride electrolytes. Rare Met. 32:305–311. doi: 10.1007/s12598-013-0060-y
19.
SchwartzM, MyungNV, NobeK.2004. Electrodeposition of iron group-rare earth alloy from aqueous media. J Electrochem Soc. 151(7):C468–C477. doi: 10.1149/1.1751196
20.
ShaohuaY, FengliY, ChunfaL, MingzhouL, XuW.2010. Electrodeposition of magnesium-yttrium alloys by molten salt electrolysis. J Rare Earths. 28:385–388. doi: 10.1016/S1002-0721(10)60322-5
21.
ShidongW, QuanL, XiushenY, QingguoS, ZhijianW.2015. Electrolytic preparation of Mg-La alloy in chloride molten salt: effect of electrolyte composition. Rare Met Mater Eng. 44(7):1623–1628. doi: 10.1016/S1875-5372(15)30104-1
22.
SinghS, PappachanAL, GadiyarH.1986. Electrodeposition of cerium and Ce-Co alloy. Journal of Less Common Metals. 120:307–315. doi: 10.1016/0022-5088(86)90657-0
23.
SinghK, SinghVB.1988. The corrosion behavior of AISI 304 stainless steel in methanol-H2SO4 mixtures. Corros Sci. 28(4):385–395. doi: 10.1016/0010-938X(88)90058-3
24.
SoareV, BuradaM, OstvoldT, KontoyannisC, StefanidakiE.2003. Study of the Mg-Nd alloy obtained by electrolysis in molten oxifluoride media. J Min Metall Sect B-Metall. 39(1–2):209–221. doi: 10.2298/JMMB0302209S
TakenakaT, OnoT, NarazakiY, NakaY, KawakamiM.2007. Improvement of corrosion resistance of magnesium metal by rare earth elements. Electrochim Acta. 53(1):117–121. doi: 10.1016/j.electacta.2007.03.027
27.
TangH, YanY-d, ZhangML, LiX, HanW, XueY, Zhangz-j, HeH.2013. Fabrication of Mg–Pr and Mg–Li–Pr alloys by electrochemical co-reduction from their molten chlorides. Electrochim Acta. 107:209–215. doi: 10.1016/j.electacta.2013.05.129
28.
TianY, SunB, ZhaiY.1998. Preparation of Al-Sc alloy in chloride system with molten salt electrolysis. Trans Nonferrous Met Soc China. 8(4):626–631.
29.
WangS-l, LinJ-b, CaiQ-y, ZhangY.2008. Electro-deposition of Co–La alloy films in urea melt and their performances. J Alloys Compd. 450(1–2):142–147. doi: 10.1016/j.jallcom.2006.10.091
30.
WuRZ, QuZK, ZhangML.2010. Reviews on the influences of alloying elements on the microstructure and mechanical properties of Mg-Li base alloys. Rev Adv Mater Sci24:35–43.
31.
ZhangM, caoP, HanW, YanY, ChenL.2012. Preparation of Mg-Li-La alloys by electrolysis in molten salt. Trans Nonferrous Met Soc China. 22(1):16–22. doi: 10.1016/S1003-6326(11)61133-3
