Anode slimes are valuable by-products in the electrolytic copper refinery process. This study aimed to investigate maximum extraction efficiency of Cu and Ni from slimes originating from the electrorefining of anodes containing high [Ni]. In addition, the extractions of Se, Te, As and Bi were determined. A factorial leaching series was conducted with T = 140–160°C, [H2SO4] = 12–20%, pO2 = 2–8 bars and solid/liquid ratio = 200–400 g/L. The highest Ni extraction of 99.7% was obtained with [H2SO4] = 20%, pO2 = 8 bar and T = 160°C while maintaining S/L ratio of 200 g/L. The extraction of copper was found to be within 97–99% in all the leaching experiments. Increasing acidity and decreasing S/L ratio increased the efficiency of Cu extraction. Mineralogical characterizations by SEM-EDX demonstrated the presence of Ag2Se, BaSO4, PbSO4 and several oxide phases in the leach residue.
AmerAM.2002. Processing of copper anode-slimes for extraction of metal values. Physicochem Probl Mi. 36:123–134.
2.
BäckströmJ.2010. Copper, nickel and tellurium yields during leaching of anode slime [Master's thesis]. Luleå University of Technology, Department of Chemical Engineering and Geosciences, Division of Process Metallurgy. p. 1–78.
3.
BartolucciA, SinghKP, BaeS.2015. Introduction to statistical analysis of laboratory data. Hoboken, NJ: John Wiley & Sons.
4.
BeaucheminS, ChenTT.2008. Behaviour of antimony and bismuth in copper electrorefining circuits. Can Metall Quart. 47(1):9–26. doi: 10.1179/cmq.2008.47.1.9
5.
BiswasJ, JanaRK, KumarV, DasguptaP, BandyopadhyayM, SanyalSK.1998. Hydrometallurgical processing of anode slime for recovery of valuable metals. Environ Waste Manage. 216–224. ISSN: 0971-9407.
6.
ChenT, DutrizacJ.1993. Mineralogical characterization of anode slimes—9. The reaction of Kidd creek anode slimes with various lixiviants. Can Metall Quart. 32(4):267–279. doi: 10.1179/cmq.1993.32.4.267
7.
ChenT, DutrizacJ.1996. Mineralogical characterization of anode slimes: part 10. Tellurium in raw anode slimes. Can Metall Quart. 35(4):337–351. doi: 10.1179/cmq.1996.35.4.337
8.
ChenT, DutrizacJE.1990a. The mineralogy of copper electrorefining. J Met. 42(8):39–44.
9.
ChenT, DutrizacJE.1990b. Mineralogical characterization of anode slimes: part 6—pressure leached slimes from the CCR division of noranda minerals inc. Can Metall Quart. 29(4):293–305. doi: 10.1179/cmq.1990.29.4.293
10.
ChenTT, DutrizacJE.1990 c. Mineralogical characterization of anode slimes: part V—nickel-rich copper anodes from the CCR division of noranda minerals inc. Can Metall Q. 29:27–37. doi: 10.1179/cmq.1990.29.1.27
11.
ChenTT, DutrizacJE.2005. Mineralogical characterization of a copper anode and the anode slimes from the La Caridad copper refinery of Mexicana de Cobre. Metall Mater TransB. 36(2):229–240. doi: 10.1007/s11663-005-0024-1
12.
CooperWC, editor. 1971. Tellurium. New York (NY): Van Nostrand Reinhold Company.
13.
DeckerT, PeteghemA.1976. Leaching of copper refinery slimes. Proc. 1976 AIME Ann. Meet.; Las Vegas, NV, USA: AIME.
14.
DönmezB, CelikC, ColakS, YartasiA.1998. Dissolution optimization of copper from anode slime in H2SO4 Solutions. Ind Eng Chem Res. 37(8):3382–3387. doi: 10.1021/ie9800290
15.
Doucet,M, Stafiej,J.2007. Processing of high-nickel slimes at the CCR refinery. Copper 2007, vol. V. Canadian Institute of Mining, Metallurgy and Petroleum, pp. 173–182.
16.
ErikssonL, JohanssonE, Kettaneh-WoldN, WikströmC, WoldS.2008. Design of Experiments, Principles and Applications, MKS Umetrics AB. 459.
17.
EverettPK.1994. Development of Intec copper process by an international consortium. Proceeding of Hydrometallurgy 94; Dordrecht, England: Springer.
18.
GillCB.1980. Non-ferrous extractive metallurgy. New York: Wiley-Interscience Publication. John Wiley and Sons, Inc.
19.
GoodwinH.1925. Autoclaves and high pressure work. 1st ed. London (UK): Chemical Engineering Library. 145.
20.
HaitJ, JanaRK, KumarV, SanyalSK.2002. Some studies on Sulfuric acid leaching of anode slime with additives. Ind Eng Chem Res. 41:6593–6599. doi: 10.1021/ie020239j
21.
HaitJ, JanaRK, SanyalSK.2009. Processing of copper electrorefining anode slime: a review. Trans Inst Min Metall Sec C. 118:240–252.
22.
Hoffmann,J.2000. Process and Engineering Considerations in the Pressure Leaching of Copper Refinery Slimes. In EPD Congress 2000, 2000 TMS Annual Meeting; March 12–16, Nashville, TN; USA. p. 397–410.
23.
HolmesJA.1981. Recent experience in the application of hydrometallurgical techniques proceedings of Hydrometallurgy 81. Manchester, England: Society of Chemical Industry.
24.
HughesS.2000. Applying ausmelt technology to recover Cu, Ni and Co from slags (overview). J Met. 52(8):30–33.
25.
Järvinen,O.2000. Outokumpu process for the precious metal refining from copper anode slime. In EPD Congress 2000 as held at the 2000 TMS Annual Meeting; Mar. 12–16; Nashville, TN; USA. p. 511–514.
26.
Järvinen,O, Virtanen,H.2003. A new hydrometallurgical process for treating copper anode slimes. In COBRE 2003, volume V; Nov 30-Dec 3; Santiago Chile. p. 221–232.
27.
Jennings,PH, Mc Andrew,R.T, Stratigakos,ES.1968. A hydrometallurgical method for recovering selenium and tellurium from copper refinery slimes. In AIME 1968; Feb 25–29; New York City.
28.
KilicY, KartalG, TimurS.2013. An investigation of copper and selenium recovery from copper anode slimes. Int J Miner Process. 124:75–82. doi: 10.1016/j.minpro.2013.04.006
29.
LiuW, YangT, ZhangaD, ChenaL, LiuY.2014. Pretreatment of copper anode slime with alkaline pressure oxidative leaching. Int J Miner Process. 128:48–54. doi: 10.1016/j.minpro.2014.03.002
30.
MaZY, YangHY, HuangST, LüY, XiongL.2015. Ultra fast microwave-assisted leaching for the recovery of copper and tellurium from copper anode slime. Int J Min Metall Mater. 22(6):582–588. doi: 10.1007/s12613-015-1110-2
31.
MoatsM, RobinsonT, DavenportW, KarcasG, DemetrioS.2007. Electrolytic copper refining, 2007 world tankhouse operating data. In: HoulachiG. E., EdwardsJ. D., RobinsonT. G., editors. Vol. V: copper electrorefining and electrowinning. Montreal: CIM, Copper 2007; p. 195–241.
32.
MoatsM, WangS, FilzwieserA, SiegmundA, DavenportW, RobinsonT.2016. Survey of copper electrorefining operations. Paper EL1-1, Copper 2016; Kobe, Japan: The Mining and Materials Processing Institute of Japan.
33.
OliveiraL, MessagieM, RangarajuS, SanfelixV, RivasMH, MierloJV.2015. Key issues of lithium-ion batteries – from resource depletion to environmental performance indicators. J Cleaner Prod. 108(1):354–362. doi: 10.1016/j.jclepro.2015.06.021
34.
PetrovGV, PlekhanovKA, KozlovskoyaAE, GreiverTN.1999. Hydrometallurgische Technologie zur verarbeitung von kupferelektroly seschlammen. Sventnye Metally. 74(1):43–45.
35.
SavinVM.1965. Selecting the most efficient method of treating slimesobtained during electrolytic copper refining. Tsvetn.Met. 38(8):30–38.
SeiskoS, AromaaJ, LatostenmaaP, ForsénO, WilsonB, LundströmM.2017. Pressure leaching of decopperized copper electrorefining anode slimes in strong acid solution. Physicochem Probl Min Pr. 53(1):465–474.
38.
ShibayamaA, AltansukhB, OinumaR, HagaK.2016. High pressure oxidative leaching of high arsenic bearing copper ore under various conditions. Paper HY1-2, Copper 2016; Kobe, Japan: The Mining and Materials Processing Institute of Japan.
39.
SubramanianKN, BellMCE, ThomasJA, NissenNC.1980. Recovery of metal values from anode slime, US patent no. 4229270.
ToyodaM, OhtaA, ShimizuT.1976. Slime treatment at niihama copper refinery. Paper A. In: AIME 1976. Las Vegas: AIME; p. 76–77.
42.
VzorodovSA, ShevelevaLD, KakovskiiIA, NavasardyanSR, KremkoEG.1982. Ways to remove difficultly soluble compounds of copper and nickel from copper – electrolysis slimes. Chem Abs. 96:126878.
43.
Weichert,K, Preiss,T, Kadereit,H, Stantke,P, Leuprecht,G.2013. The influence of process parameters on anode slime leaching. In Proceedings of Copper 2013. p. 339–345.
44.
WikedziA, AweSA.2017. Selective extraction of antimony and arsenic from decopperization slime using experimental design. J. Sustain. Metall. 3:362–374. doi: 10.1007/s40831-016-0101-5
45.
YangH, MaZ, HuangS, LvY, XiongL.2015. Intensification of pretreatment and pressure leaching of copper anode slime by microwave radiation. J Cent South Univ. 22:4536–4544. doi: 10.1007/s11771-015-3003-y
46.
YildirimG, BorFY.1985. Hydrometallurgical treatment of a copper refinery slime rich in selenium and tellurium. Erzmetall. 38(4):196–199.
47.
Ying,CH.1983. Copper refinery anode slime. Proceeding of the Third Int. Symp. of Hydrometallurgy. Annual Meeting; March 6–10; Atlanta, Georgia.
