Chemical and thermal modification can change the hydrophilic properties of wood, and thus affect their coating performance. This study determined the surface characteristics of chemically and thermally modified short rotation teak wood. The characteristics studied were surface roughness, surface free energy (SFE), contact angle, wettability, and coating bonding quality. Results show that the surface of short rotation teak became smoother after chemical and thermal modifications; however, surface roughness increased after furfurylation. The total SFE of chemically and thermally modified teak wood decreased after treatment. The decrease in the total SFE caused the decrease in the constant contact angle change rate (K-value). The K-values for water-dispersed polyurethane and acrylic paints were nearly 0, which indicated their lower wettability. The paint bonding quality decreased after accelerated weathering. Short rotation teak with Glycerol-Maleic Anhydride (GMA)-thermal treatment can be considered for exterior applications with a proper selection of paint.
American Standard Testing and Material. 2007. ASTM D 3359-02. Standard test methods for adhesion by tape test. In Annual Book of ASTM Standard. West Conshohocken: American Standard Institution.
2.
AyadiN, LejeuneF, CharrierF, CharrierB, MerlinA.2003. Color stability of heat-treated wood during artificial weathering. Holz als Roh – und Werkstoff. 61(3):221–226. doi:10.1007/s00107-003-0389-2.
3.
BaysalE, OzakiSK, YalinkilicMK.2004. Dimensional stabilization of wood treated with furfuryl alcohol catalysed by borates. Wood Sci Technol. 38(6):405–415. doi:10.1007/s00226-004-0248-2.
4.
BuyuksariU, AkbulutT, GulerC, AsN.2011. Wettability and surface roughness of natural and plantation-grown narrow-leaved ASH (Fraxinus angustifolia Vahl.) wood. BioResources. 6(4):4721–4730. doi:10.15376/biores.6.4.4721-4730.
5.
ChouraM, BelgacemNM, GandiniA.1996. Acid-catalyzed polycondensation of furfuryl alcohol: mechanisms of chromophore formation and cross-linking. Macromolecules. 29(11):3839–3850. doi:10.1021/ma951522f.
6.
ChristyAG, SendenTJ, EvansPD.2005. Automated measurement of checks at wood surfaces. Measurement (Mahwah N J). 37(2):109–118.
7.
DarmawanW, NandikaD, NoviyantiE, AliprajaI, LumonggaD, GardnerD, GérardinP.2018. Wettability and bonding quality of exterior coatings on Jabon and Sengon wood surfaces. J Coat Technol Res. 15(1):95–104. doi:10.1007/s11998-017-9954-1.
8.
De MeijerM.2001. Review on the durability of exterior wood coatings with reduced VOC-content. Prog Org Coat. 43(4):217–225. doi:10.1016/s0300-9440(01)00170-9.
9.
DenesF, ManolacheS, YoungRA.1999. Synthesis and surface functionalization under cold-plasma conditions. J Photopolym Sci Technol. 12(1):27–38. doi:10.2494/photopolymer.12.27.
10.
DiesteA, KrauseA, BollmusS, MilitzH.2009. Gluing ability of plywood produced with DMDHEU-modified veneers of Fagus sp., Betula sp., and Picea sp. Int J Adhes Adhes. 29(2):206–209. doi:10.1016/j.ijadhadh.2008.05.001.
11.
DongY, YanY, ZhangS, LiJ, WangJ.2015. Flammability and physical-mechanical properties assessment of wood treated with furfuryl alcohol and nano-SiO2. Eur J Wood Wood Prod. 73(4):457e64. doi:10.1007/sd107-015-0896-y.
12.
EngongaPE, SchneiderR, GérardinP, LoubinouxB.1999. Chemical modification of wood with perfuoroalkyl ethanol and 4,4′-diphenylmethane diisocyanate. Holzforschung. 53:272–276. doi:10.1515/HF.1999.046.
13.
EvansPD, MichellAJ, SchmalzlKJ.1992. Studies of the degradation and protection of wood surfaces. Wood Sci Technol. 26(2):151–163. doi:10.1007/BF00194471.
14.
EvansPD, OwenNL, SchmidS, WebsterRD.2002. Weathering and photostability of benzoylated wood. Polym Degrad Stab. 76(2):291–303. doi:10.1016/S0141-3910(02)00026-5.
15.
GrelierS, CastellanA, DesrousseauxS, NourmamodeA, PodgorskiL.1997. Attempt to protect wood colour against UV/visible light by using antioxidants bearing isocyanate groups and grafted to the material with microwave. Holzforschung. 51(6):511–518. doi:10.1515/hfsg.1997.51.6.511.
HernándezVA, EvansPD.2015. Technical note: melanization of the wood-staining fungus Aureobasidium pullulans in response to UV radiation. Wood Fiber Science. 47:120–124.
18.
HillCAS.2006. Wood modification: chemical, thermal and other processes. West Sussex (UK): Wiley.
19.
International Organization for Standardization. 1997. Geometrical product specifications (GPS) surface texture: profile method. Terms, definitions and surface texture parameters. ISO 4287-1977. Geneva (SW): International Organization for Standardization.
20.
KiguchiM, EvansPD.1998. Photostabilisation of wood surfaces using a grafted benzophenone UV absorber. Polym Degrad Stab. 61(1):33–45. doi:10.1016/s0141-3910(97)00124-9.
21.
KorkutDS, GullerB.2008. The effects of heat treatment on physical properties and surface roughness of red-bud maple (Acer trautvetteri Medw.) wood. Bioresour Technol. 99(8):2846–2851. doi:10.1016/j.biortech.2007.06.043.
22.
KošelováZ, RáheľJ, GalmizO.2021. Plasma treatment of thermally modified and unmodified Norway spruce wood by diffuse coplanar surface barrier discharge. Coatings. 11(1):40. doi:10.3390/coatings11010040.
23.
MarthaR, BasriE, SetionoL, BatubaraI, RahayuIS, GérardinP, DarmawanW.2021. The effect of heat treatment on the characteristics of the short rotation teak. Int Wood Prod J. 12(3):218–227. doi:10.1080/20426445.2021.1953723.
24.
MarthaR, DirnaFC, HasanusiA, RahayuIS, DarmawanW.2020. Surface free energy of 10 tropical woods species and their acrylic paint wettability. J Adhes Sci Technol. 34(2):167–177. doi:10.1080/01694243.2019.1663009.
25.
MarthaR, MubarokM, BatubaraI, RahayuIS, SetionoL, DarmawanW, AkongFO, GeorgeB, GérardinC, GérardinP.2021a. Effect of furfurylation treatment on technological properties of short rotation teak wood. J Mater Res Technol. 12:1689–1699. doi:10.1016/j.jmrt.2021.03.092.
26.
MarthaR, MubarokM, BatubaraI, RahayuIS, SetionoL, DarmawanW, AkongFO, GeorgeB, GérardinC, GérardinP.2021b. Effect of glycerol-maleic anhydride treatment on technological properties of short rotation teak wood. Wood Sci Technol. 55:1795–1819. doi:10.1007/s00226-021-01340-3.
27.
MeijerMD, MilitzH.2001. Moisture transport in coated wood. Part 2: influence of coating type, film thickness, wood species, temperature and moisture gradient on kinetics of sorption and dimensional change. Holz als Roh-und Werkstoff. 58:467–475. doi:10.1007/s001070050461.
28.
MubarokM, MilitzH, DarmawanIW, HadiYS, DumarçayS, GérardinP.2020. Resistance against subterranean termite of beech wood impregnated with different derivatives of glycerol or polyglycerol and maleic anhydride followed by thermal modification: a field test study. Eur J Wood Wood Prod. 78(5):387–392. doi:10.1007/s00107-020-01503-2.
29.
NuopponenM, VuorinenT, JámsäS, ViitaniemiP.2005. Thermal modifications in softwood studied by FT-IR and UV resonance Raman spectroscopies. J Wood Chem Technol. 24(1):13–26. doi:10.1081/WCT-120035941.
30.
OzmenN.2007. Dimensional stabilisation of fast growing forest species by acetylation. J Appl Sci. 7:710–714. doi:10.3923/jas.2007.710.714.
31.
PratiwiLA, DarmawanW, PriadiT, GeorgeB, MerlinA, GérardinC, DumarçayS, GérardinP.2019. Characterization of thermally modified short and long rotation teaks and the effects on coatings performance. Maderas Ciencia y Tecnología. 21(2):209–222. doi:10.4067/S0718-221X2019005000208.
32.
QinZ, ChenH, GaoQ, ZhangS, LiJ.2014. Wettability of sanded and aged fast-growing poplar wood surfaces: I. Surface free energy. BioResources. 10(1):1008–1023. doi:10.15376/biores.10.1.1008-1023.
33.
RabelW.1971. Einige aspekte der benetzungstheorie and ihre anwendung auf die untersuchung und veränderung der oberflächeneigenschaften von polymeren. Fabre und Lack. 77(10):997–1006.
34.
RahayuI, DarmawanW, ZainiLH, PrihatiniE.2020. Characteristics of fast-growing wood impregnated with nanoparticles. J For Res. 31(2):677–685.
35.
RathkeJ, SinnG.2013. Evaluating the wettability of MUF resins and pMDI on two different OSB raw materials. Eur J Wood Wood Prod. 71(3):335–342. doi:10.1007/s00107-013-0675-6.
36.
ReinprechtL.2016. Wood deterioration, protection and maintenance. Hoboken: John Wiley & Sons. doi:10.1002/9781119106500.
37.
RowellRM.2006. Acetylation of wood. For Prod J. 56:4–12.
SrinivasK, PandeyKK.2017. Enhancing photostability of wood coatings using titanium dioxide nanoparticles. In: Wood is good: current trends and future prospects in wood utilization; p. 251–259. doi:10.1007/978-981-10-3115-1_23.
41.
SundqvistB, MorénT.2002. The influence of wood polymers and extractives on wood colour induced by hydrothermal treatment. Holz als Roh - und Werkstoff. 60(5):375–376. doi:10.1007/s00107-002-0320-2.
42.
TalaiA, ZareM, AbdolsadehH.2016. Effect furfurylation on physical properties and surface quality of two woody species (beech and silver fir). Iran J Wood Paper Ind. 7(3):400–411.
43.
UnsalO, AyrilmisN.2005. Variations in compression strength and surface roughness of heat-treated Turkish river red gum (Eucalyptus camaldulensis) wood. J Wood Sci. 51(4):405–409. doi:10.1007/s10086-004-0655-x.
44.
VermaP, JungaU, MilitzH, MaiC.2009. Protection mechanisms of DMDHEU treated wood against white and brown rot fungi. Holzforschung. 63:371–378.
45.
WålinderMEP.2002. Study of Lewis acid-base properties of wood by contact angle analysis. Holzforschung. 56(4):363–371. doi:10.1515/HF.2002.058.
46.
YuningsihI, RahayuIS, DumasariL, DarmawanW.2020. Wettability and adherence of acrylic paints on long and short rotation teaks. Wood Mater Sci Eng. 15:229–236. doi:10.1080/17480272.2019.1575903.
47.
ZhuY, EvansPD.2021. Surface protection of wood with metal acetylacetonates. Coatings. 11(8):916. doi:10.3390/coatings11080916.
48.
ZinkP, FengelD.1988. Studies on the colouring matter of blue-stain fungi. Part 1. General characterization and the associated compounds. Holzforschung. 42:217–220.
