This work studies the friction and the sliding wear behaviour of surface treated SAE 4140 steel. The performance of ion nitriding and PVD TiN coatings applied by means of industrial processes as single or duplex treatments was evaluated. Although the deposited TiN coatings (0.7 µm thick) resulted thinner than most of the typically employed for sliding situations, the present work shows that they can provide very good protection. The use of ion nitriding as a pretreatment proved to be beneficial when combined with such a thin coating. However, in the pin on disc sliding tests the coated discs developed the highest friction coefficients and boosted the damage in the steel pins.
LepickaM, Gradzka-DahlkeM, PieniakD, . Effect of mechanical properties of substrate and coating on wear performance of TiN- or DLC-coated 316LVM stainless steel. Wear. 2017;382–383:62–70.
6.
HuangX, EtsionI, ShaoT.Effects of elastic modulus mismatch between coating and substrate on the friction and wear properties of TiN and TiAlN coating systems. Wear. 2015;338–339:54–61.
7.
Hainsworth SV, SohWC.The effect of the substrate on the mechanical properties of TiN coatings. Surf Coat Technol2003;163–164:515–520.
8.
LeylandA, MatthewsA.On the significance of the H / E ratio in wear control : a nanocomposite coating approach to optimised tribological behaviour. Wear. 2000;246:1–11.
9.
ColomboDA, EcheverríaMD, DommarcoRC, . Influence of TiN coating thickness on the rolling contact fatigue resistance of austempered ductile iron. Wear. 2016;350–351:82–88.
10.
PodgornikB, LeskovšekV, ArhB.The effect of heat treatment on the mechanical, tribological and load-carrying properties of PACVD-coated tool steel. Surf Coat Technol. 2013;232:528–534.
PodgornikB, VižintinJ, WänstrandO, . Tribological properties of plasma nitrided and hard coated AISI 4140 steel. Wear. 2001;249:254–259.
13.
HöckK, SpiesHJ, LarischB, . Wear resistance of prenitrided hardcoated steels for tools and machine components. Surf Coat Technol. 1997;88:44–49.
14.
SpiesHJ, LarischB, HöckK, . Adhesion and wear resistance of nitrided and TiN coated low alloy steels. Surf Coat Technol. 1995;74–75:178–182.
15.
D'HaenJ, QuaeyhaegensC, StalsLM, . Interface study of physical vapour deposition TiN coatings on plasma-nitrided steels. Surf Coat Technol. 1993;61:194–200.
16.
FengX, ZhangY, HuH, . Comparison of mechanical behavior of TiN, TiNC, CrN/TiNC, TiN/TiNC films on 9Cr18 steel by PVD. Appl Surf Sci. 2017;422:266–272.
17.
JinJ, DuanH, LiX.The influence of plasma nitriding on microstructure and properties of CrN and CrNiN coatings on Ti6Al4V by magnetron sputtering. Vacuum. 2017;136:112–120.
18.
Al-BukhaitiMA, Al-HatabKA, TillmannW, . Tribological and mechanical properties of Ti/TiAlN/TiAlCN nanoscale multilayer PVD coatings deposited on AISI H11 hot work tool steel. Appl Surf Sci. 2014;318:180–190.
19.
ColomboDA, EcheverriaMD, LainoS, . Sliding wear behavior of PVD CrN and TiN coated austempered ductile iron. ISIJ Int. 2014;54:2860–2867.
20.
LiuA, DengJ, CuiH, . Friction and wear properties of TiN, TiAlN, AlTiN and CrAlN PVD nitride coatings. Int J Refract Met Hard Mater. 2012;31:82–88.
21.
StaiaMH, Pérez-DelgadoY, SanchezC, . Hardness properties and high-temperature wear behavior of nitrided AISI D2 tool steel, prior and after PAPVD coating. Wear. 2009;267:1452–1461.
22.
NolanD, HuangSW, LeskovsekV, . Sliding wear of titanium nitride thin films deposited on Ti-6Al-4V alloy by PVD and plasma nitriding processes. Surf Coat Technol. 2006;200:5698–5705.
23.
StaiaMH, FragielA, BrühlSP, . Behavior of the pulsed ion nitrided AISI 4140 steel/CVD TiN coatings as tribological pair. Thin Solid Films. 2000;377–378:650–656.
24.
MaG, WangL, GaoH, . The friction coefficient evolution of a TiN coated contact during sliding wear. Appl Surf Sci. 2015;345:109–115.
25.
DIN Standard. DIN 50190-3 - Hardness depth of heat-treated parts. 1979.
26.
ISO. International Standard - ISO 14577-1. Metallic materials – Instrumented indentation test for hardness and materials parameters. 2015.
27.
BurnettPJ, RickerbyDS.The relationship between hardness and scratch adhesion. Thin Solid Films. 1987;154:403–416.
28.
VacaLS, QuintanaJP, VegaD, . Tribological and corrosion behavior of duplex coated AISI 316L using plasma based ion implantation and deposition. Mater Today Commun. 2021;26:Article 101892.
29.
DalibonEL, LasorsaC, CaboA, . Tribological properties of SiNx films on PH stainless steel with and without nitriding as a Pre-treatment. Procedia Mater Sci. 2012;1:313–320.
30.
ArchardJF.Contact and rubbing of flat surfaces. J Appl Phys. 1953;24:981–988.
31.
HuangJH, OuyangFY, YuGP.Effect of film thickness and Ti interlayer on the structure and properties of nanocrystalline TiN thin films on AISI D2 steel. Surf Coat Technol. 2007;201:7043–7053.
32.
ASTM International. ASTM-C1624. Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing 2010. https://doi.org/10.1520/C1624-05R10.
33.
SaketiS, OlssonM.Influence of CVD and PVD coating micro topography on the initial material transfer of 316L stainless steel in sliding contacts – a laboratory study. Wear. 2017;388–389:29–38.
34.
SaketiS, ÖstbyJ, OlssonM.Influence of tool surface topography on the material transfer tendency and tool wear in the turning of 316L stainless steel. Wear. 2016;368–369:239–252.
35.
AbusuilikSB.Pre-, intermediate, and post-treatment of hard coatings to improve their performance for forming and cutting tools. Surf CoatTechnol. 2015;284:384–395.
36.
HarlinP, BexellU, OlssonM.Influence of surface topography of arc-deposited TiN and sputter-deposited WC/C coatings on the initial material transfer tendency and friction characteristics under dry sliding contact conditions. Surf Coat Technol. 2009;203:1748–1755.
37.
HarlinP, CarlssonP, BexellU, . Influence of surface roughness of PVD coatings on tribological performance in sliding contacts. Surf Coat Technol. 2006;201:4253–4259.
