High-entropy carbide (Ti0.2xZr0.2xHf0.2x+ (1-x)Nb0.2xTa0.2x)Cx (HEC-(1-x)Hf, x = 0.6-1) ceramics with 0-40 at.% nominal carbon vacancy were prepared by adding metal Hf into (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C (HEC) as a case study. The samples prepared by spark plasma sintering at 2000oC exhibit relative densities higher than 99%, single-phase rock salt structure, and homogeneous metal elements distribution. Their lattice parameters increase gradually with the added Hf content. The lattice parameter of HEC-0.4Hf is 0.86% higher than HEC's. The average grain size of the samples decreased initially, followed by an increase as Hf content increased, which is controlled by the comprehensive effect of Hf addition and carbon vacancy. The thermal conductivities of the samples decrease with the increase of Hf addition. HEC-0.4Hf has a very low thermal conductivity of 5.6 W/m·K at room temperature, which decreases 67.8% compared to HEC. The increased phonon scattering by the carbon vacancies can be the main reason for the reduced thermal conductivity.
WuY, BaoW, ShenXQ, . Zrb2-based solid solution ceramics and their mechanical and thermal properties. Int J Appl Ceram Technol. 2023;20(2):790–802. doi:10.1111/ijac.14170
8.
GildJ, ZhangY, HarringtonT, . High-entropy metal diborides: a new class of high-entropy materials and a new type of ultrahigh temperature ceramics. Sci Rep. 2016;6(1):37946. doi:10.1038/srep37946
9.
ShenXQ, LiuJX, LiF, . Preparation and characterization of diboride-based high entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)B2–SiC particulate composites. Ceram Int. 2019;45(18):24508–24514. doi:10.1016/j.ceramint.2019.08.178
10.
QinY, LiuJX, LiF, . A high entropy silicide by reactive spark plasma sintering. J Adv Ceram. 2019;8(1):148–152. doi:10.1007/s40145-019-0319-3
ZhaoSJ.Lattice distortion in high-entropy carbide ceramics from first-principles calculations. J Am Ceram Soc. 2021;104(4):1874–1886. doi:10.1111/jace.17600
MengH, ChuYH.Surface energies in high-entropy carbides with variable carbon stoichiometry. J Am Ceram Soc. 2022;105(9):5835–5842. doi:10.1111/jace.18521
16.
LiJ, ZhouY, SuY, . Synthesis and mechanical and elevated temperature tribological properties of a novel high-entropy (TiVNbMoW)C4.375 with carbon stoichiometry deviation. J Adv Ceram. 2023;12(2):242–257. doi:10.26599/JAC.2023.9220679
17.
WangXG, LiuJX, KanYM, . Effect of solid solution formation on densification of hot-pressed ZrC ceramics with MC (M = V, Nb, and Ta) additions. J Eur Ceram Soc. 2012;32(8):1795–1802. doi:10.1016/j.jeurceramsoc.2011.10.045
18.
WeiBX, ChenL, WangYJ, . Densification, mechanical and thermal properties of ZrC1−x ceramics fabricated by two-step reactive hot pressing of ZrC and ZrH2 powders. J Eur Ceram Soc. 2018;38(2):411–419. doi:10.1016/j.jeurceramsoc.2017.09.027
19.
WangXG, GuoWM, KanYM, . Densification behavior and properties of hot-pressed ZrC ceramics with Zr and graphite additives. J Eur Ceram Soc. 2011;31(6):1103–1111. doi:10.1016/j.jeurceramsoc.2011.01.005
20.
GusevAI, ZyryanovaAN.Ordering and magnetic susceptibility of non-stoichiometric hafnium carbide. Phys Status Solidi A. 2000;177(2):419–437. doi:10.1002/(SICI)1521-396X(200002)177:2<419::AID-PSSA419>3.0.CO;2-J
21.
ZhouY, FahrenholtzWG, GrahamJ, . Electronic structure and thermal conductivity of zirconium carbide with hafnium additions. J Am Ceram Soc. 2021;104(9):4708–4717. doi:10.1111/jace.17860
22.
ZhouY, FahrenholtzWG, GrahamJ, . From thermal conductive to thermal insulating: effect of carbon vacancy content on lattice thermal conductivity of ZrCx. J Mater Sci Technol. 2021;82:105–113. doi:10.1016/j.jmst.2020.11.068
23.
PengC, TangH, HeY, . A novel non-stoichiometric medium-entropy carbide stabilized by anion vacancies. J Mater Sci Technol. 2020;51:161–166. doi:10.1016/j.jmst.2020.02.049
24.
HeY, PengC, XinSW, . Vacancy effect on the preparation of high-entropy carbides. J Mater Sci. 2020;55(16):6754–6760. doi:10.1007/s10853-020-04471-3
25.
SongJT, ChenGQ, XiangHM, . Regulating the formation ability and mechanical properties of high-entropy transition metal carbides by carbon stoichiometry. J Mater Sci Technol. 2022;121:181–189. doi:10.1016/j.jmst.2021.12.063
26.
LuWY, ChenL, ZhangW, . Single-phase formation and mechanical properties of (TiZrNbTaMo)C high-entropy ceramics: first-principles prediction and experimental study. J Eur Ceram Soc. 2022;42(5):2021–2027. doi:10.1016/j.jeurceramsoc.2021.12.058
27.
VasanthakumarK, GorleR, AriharanS, . Novel single phase (Ti0.2W0.2Ta0.2Mo0.2V0.2)C0.8 high entropy carbide using ball milling followed by reactive spark plasma sintering. J Eur Ceram Soc. 2021;41(13):6756–6762. doi:10.1016/j.jeurceramsoc.2021.06.009
28.
LuoSC, GuoWM, FangZL, . Effect of carbon content on the microstructure and mechanical properties of high-entropy (Ti0.2Zr0.2Nb0.2Ta0.2Mo0.2)Cx ceramics. J Eur Ceram Soc. 2022;42(2):336–343. doi:10.1016/j.jeurceramsoc.2021.10.019
29.
LinGW, LiuJX, QinY, . Low-temperature reactive sintering of carbon vacant high-entropy carbide ceramics with in-situ formed silicon carbide. J Am Ceram Soc. 2022;105(4):2392–2398. doi:10.1111/jace.18276
30.
ZhangW, ChenL, LuW, . Non-stoichiometry of (TiZrHfVNbTa)Cx and its significance to the microstructure and mechanical properties. J Eur Ceram Soc. 2022;42(14):6347–6355. doi:10.1016/j.jeurceramsoc.2022.07.007
31.
LuK, LiuJX, WeiXF, . Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase. J Eur Ceram Soc. 2020;40(54):1839–1847. doi:10.1016/j.jeurceramsoc.2019.12.056
32.
WeiXF, QinY, LiuJX, . Gradient microstructure development and grain growth inhibition in high-entropy carbide ceramics prepared by reactive spark plasma sintering. J Eur Ceram Soc. 2020;40(4):935–941. doi:10.1016/j.jeurceramsoc.2019.12.034
33.
WeiXF, LiuJX, BaoWC, . High-entropy carbide ceramics with refined microstructure and enhanced thermal conductivity by the addition of graphite. J Eur Ceram Soc. 2021;41(9):4747–4754. doi:10.1016/j.jeurceramsoc.2021.03.053
34.
SarkarA, WangQS, SchieleA, . High-entropy oxides: fundamental aspects and electrochemical properties. Adv Mater. 2019;31(26):1806236. doi:10.1002/adma.201806236
35.
OliverWC, PharrGM.An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7(6):1564–1583. doi:10.1557/JMR.1992.1564
36.
YuD, YinJ, ZhangBH, . Pressureless sintering and properties of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics: the effect of pyrolytic carbon. J Eur Ceram Soc. 2021;41(6):3823–3831. doi:10.1016/j.jeurceramsoc.2021.01.048
37.
YuD, ZhangBH, YinJ, . Densifying (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics by two-step pressureless sintering. J Am Ceram Soc. 2022;105(1):76–81. doi:10.1111/jace.18116
38.
ZhaoX, YuS, ZhengJM, . Machine learning of carbon vacancy formation energy in high-entropy carbides. J Eur Ceram Soc. 2023;43(4):1315–1321. doi:10.1016/j.jeurceramsoc.2022.11.044
39.
QinY, LiuJX, LiangYC, . Equiatomic 9-cation high-entropy carbide ceramics of the IVB, VB, and VIB groups and thermodynamic analysis of the sintering process. J Adv Ceram. 2022;11(7):1082–1092. doi:10.1007/s40145-022-0594-2
40.
RoweD, ShuklaV.The effect of phonon-grain boundary scattering on the lattice thermal conductivity and thermoelectric conversion efficiency of heavily doped fine-grained, hot-pressed silicon germanium alloy. J Appl Phys. 1981;52(12):7421–7426. doi:10.1063/1.328733
