The AlFeCoNiCrTi high-entropy alloy (HEA) powders were prepared by high-energy ball milling. The ultrafine-grained WC–HEA and WC–Co-cemented carbides were fabricated through planetary ball milling and heat-pressure sintering. The microstructures and properties of the sintered alloys were compared using scanning electron microscope, X-ray diffraction, mechanical property testing and electrochemical testing. It has been shown that the AlFeCoNiCrTi HEA can be used as a binder for the ultrafine-grained WC-based cemented carbide. The WC–HEA-cemented carbide has better performances than the WC–Co-cemented carbide. The suitable contents of HEA can inhibit the WC grain growth and improve the mechanical properties and corrosion resistance of cemented carbides.
FangZZ, WangX, RyuT, . Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide – A review. Int J Refract Met Hard Mater.2009;27:288–299. doi: 10.1016/j.ijrmhm.2008.07.011
StraumalBB, KonyashinI, RiesB, . Pseudopartial wetting of WC/WC grain boundaries in cemented carbides. Mater Lett.2015;147:105–108. doi: 10.1016/j.matlet.2015.02.029
5.
LiXQ, ChenJ, ZhengD H, . Preparation and mechanical properties of WC-10Ni3Al cemented carbides with plate-like triangular prismatic WC grains. J Alloy Compd. 2012;544:134–140. doi: 10.1016/j.jallcom.2012.07.131
6.
KwakBW, SongJH, KimBS, . Mechanical properties and rapid sintering of nanostructured WC and WC-TiAl3 hard materials by the pulsed current activated heating. Int J Ref Met Hard Mater.2016;54:244–250. doi: 10.1016/j.ijrmhm.2015.08.003
7.
OuXQ, SongM, ShenTT, . Fabrication and mechanical properties of ultrafine grained WC-10Co-0.45Cr3C2-0.25VC alloys. Int J Ref Met Hard Mater.2011;29:260–267. doi: 10.1016/j.ijrmhm.2010.11.004
8.
ZhangL, XieMW, ChengX, . Micro characteristics of binder phases in WC–Co cemented carbides with Cr–V and Cr–V–RE additives. Int J Ref Met Hard Mater.2013;36:211–219. doi: 10.1016/j.ijrmhm.2012.08.017
9.
AristizablM, RodriguezN, IbarretaF, . Liquid phase sintering and oxidation resistance of WC-Ni-Co-Cr cemented carbides. Int J Ref Met Hard Mater.2010;28:516–522. doi: 10.1016/j.ijrmhm.2010.02.010
10.
BounhoureV, LayS, CoindeauS, . Effect of Cr addition on solid state sintering of WC-Co alloys. Int J Ref Met Hard Mater.2015;52:21–28. doi: 10.1016/j.ijrmhm.2015.05.002
11.
ChangSH, ChangMH, HuangKT.Study on the sintered characteristics and properties of nanostructured WC–15 wt.-% (Fe–Ni–Co) and WC–15 wt.-% Co hard metal alloys. J Alloy Compd.2015;649:89–95. doi: 10.1016/j.jallcom.2015.07.119
12.
ShenTT, XiaoDH, OuXQ, . Effects of LaB6 addition on the microstructure and mechanical properties of ultrafine grained WC-10Co alloys. J Alloy Compd.2011;509:1236–1243. doi: 10.1016/j.jallcom.2010.09.202
13.
ZhangFM, ShenJ, SunJF.The effect of phosphorus additions on densification, grain growth and properties of nanocrystalline WC-Co composites. J Alloy Compd.2004;385:96–103. doi: 10.1016/j.jallcom.2004.04.110
14.
MahmoodanM, AliakbarzadehH, GholamipourR.Microstructural and mechanical characterization of high energy ball milled and sintered WC-10wt%Co-xTaC nano powders. Int J Ref Met Hard Mater.2009;27:801–805. doi: 10.1016/j.ijrmhm.2009.02.001
15.
YehJW, ChenSK, LinSJ, . Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater.2004;6:299–303. doi: 10.1002/adem.200300567
16.
ZhangY, ZuoTT, TangZ, . Microstructures and properties of high-entropy alloys. Prog Mater Sci.2014;61:1–93. doi: 10.1016/j.pmatsci.2013.10.001
17.
ZhuG, LiuY, YeJW.Early high-temperature oxidation behavior of Ti(C,N)-based cermets with multi-component AlCoCrFeNi high-entropy alloy binder. Int J Ref Met Hard Mater.2014;44:35–41. doi: 10.1016/j.ijrmhm.2014.01.005
18.
ChenCS, YangCC, ChaiHY, . Novel cermet material of WC/multi-element alloy. Int J Ref Met Hard Mater.2014;43:200–204. doi: 10.1016/j.ijrmhm.2013.11.005
19.
ChenWP, FuZQ, FangSC, . Alloying behavior, microstructure and mechanical properties in a FeNiCrCo0.3Al0.7 high entropy alloy. Mater Des.2013;51:854–860. doi: 10.1016/j.matdes.2013.04.061
SchubertWD, NeumeisterH, KingerG, . Hardness to toughness relationship of fine-grained WC-Co hardmetals. Int J Ref Met Hard Mater.1998;16:133–142. doi: 10.1016/S0263-4368(98)00028-6
22.
ChaSI, HongSH, HaGH, . Microstructure and mechanical properties of nanocrystalline WC-10Co cemented carbides. Scr Mater.2001;44:1535–1539. doi: 10.1016/S1359-6462(01)00835-1
23.
ChaSI, LeeKH, RyuHJ, . Analytical modeling to calculate the hardness of ultra-fine WC-Co cemented carbides. Mater Sci Eng A. 2008;489:234–244. doi: 10.1016/j.msea.2007.12.036
24.
JiaK, FischerTE, GalloisB.Microstructure, hardness and toughness of nanostructured and conventional WC-Co composites. Nanostruct Mater.1998;10:875–891. doi: 10.1016/S0965-9773(98)00123-8
25.
ArmstrongRW, CazacuO.Indentation fracture mechanics toughness dependence on grain size and crack size: application to alumina and WC–Co. Int J Ref Metal Hard Mater.2006;24:129–134. doi: 10.1016/j.ijrmhm.2005.03.010
26.
SutthiruangwongS, MoriG.Corrosion properties of Co-based cemented carbides in acidic solutions. Int J Ref Metal Hard Mater.2003;21:135–145. doi: 10.1016/S0263-4368(03)00027-1
