In this investigation, it was studied the effect of curing temperature on the mechanical properties of pastes made with calcium sulfoaluminate cements synthesised from industrial wastes at a relatively low temperature of 1100°C. Fluorgypsum, fly ash, aluminium slag and calcium carbonate were used as raw materials. The main phases of synthesis were calcium sulfoaluminate and gehlenite. Pastes were prepared with different water/cement ratios, 15–25 wt-% hemihydrate and cured at 20 and 40°C. It was found that with higher total amounts of sulphates and increase in temperature, compressive strength is enhanced in the first days of curing and setting times decreased. Ettringite was found to be the main reaction product forming dense structures over time. Calcium sulphates hydration changed the ettringite formation causing fluctuations in the strength development, nevertheless, in some cases the strength surpassed 40 MPa at 28 days. Microstructures and hydration products were studied by SEM and XRD.
Burciaga-DiazO, Escalante GarcíaJI, GorokhovskyAV.Geopolimers based on a coarse low-purity kaolin mineral: mechanical strength as a function of the chemical composition and temperature. Cem Concr Compos. 2012;34:18–24. DOI:10.1016/j.cemconcomp.2011.08.001.
2.
Avila-LópezU, Almanza-RoblesJM, Escalante GarcíaJI.Investigation of novel waste glass and limestone binders using statistical methods. Constr Build Mater. 2015;82:296–303. DOI:10.1016/j.conbuildmat.2015.02.085.
3.
DamtoftJS, LukasikJ, HerfortD, Sustainable development and climate change initiatives. Cem Concr Res. 2008;38:115–127. DOI:10.1016/j.cemconres.2007.09.008.
4.
OlivierJGJ, Janssens-MaenhoutG, PetersJAHW, Trends in global CO2 emissions: 2012 report. PBL Netherlands Environmental Assessment Agency, The Hague/Bilthoven.
5.
Gallardo-HerediaM, Magallanes-RiveraRX, Almanza-RoblesJM, : Effect of citric acid on calcium sulfoaluminate cements synthesised from industrial wastes at low temperature. Adv Cem Res. 2020;32:125–136. DOI:10.1680/jadcr.18.00019.
6.
LanW, GlasserFP.Hydration of calcium sulphoaluminate cements. Adv Cem Res. 1996;8:127–134. DOI:10.1680/adcr.1996.8.31.127.
7.
SadanandaS, MajlingJ.Preparation of sulphoaluminate belite cement from fly ash. Cem Concr Res. 1994;24:1065–1072. DOI:10.1016/0008-8846(94)90030-2.
8.
ShenY, QiangJ, ChaiJ, Calcium sulphoaluminate cements made with phosphogypsum: production issues and material properties. Cem Concr Compos. 2014;48:67–74. DOI:10.1016/j.cemconcomp.2014.01.009.
9.
ArjunanP, SilsbeeMR, RoyDM.Sulfoaluminate-belite cement from low-calcium fly ash and sulfur-rich and other industrial by-products. Cem Concr Res. 1999;29:1305–1311. DOI:10.1016/S0008-8846(99)00072-1.
10.
JanotkaI, KrajčiL.An experimental study of the upgrade of sulphoaliminate-belite cement systems by blending with Portland cement. Adv Cem Res. 1999;11:35–41. DOI:10.1680/adcr.1999.11.1.35.
11.
XuL, WuK, LiN, Utilization of flue gas desulfurization gypsum for producing calcium sulfoaluminate cement. J Clean Prod. 2017;161:803–811. DOI:10.1016/j.jclepro.2017.05.055.
12.
QianGR, ShiJ, CaoYL, Properties of MSW fly ash-calcium sulfoaluminate cement matrix and stabilization/solidification on heavy metals. J Hazard Mater. 2008;152:196–203. DOI:10.1016/j.jhazmat.2007.06.118.
13.
KatsiotiM, BouraP, Agatzini-LeonardouS, Use of jarosite/alunite precipitate as a substitute for gypsum in Portland cement. Cem Concr Compos. 2005;27:3–9. DOI:10.1016/j.cemconcomp.2003.10.002.
14.
LiH, AgrawalDK, ChengJ, Microwave sintering of sulphoaluminate cement with utility wastes. Cem Concr Res. 2001;31:1257–1261. DOI:10.1016/S0008-8846(01)00579-8.
15.
LiJ, MaH, ZhaoHW.Preparation of sulphoaluminate-alite composite mineralogical phase cement clinker from high alumina fly ash. KEM. 2007;334–335:421–424. DOI:10.4028/www.scientific.net/kem.334-335.421.
16.
MurayamaN, MaekawaI, UshiroH, Synthesis of various layered double hydroxides using aluminum dross generated in aluminum recycling process. Int J Miner Process. 2012;110-111:46–52. DOI:10.1016/j.minpro.2012.03.011.
17.
WangY, SuM, ZhangL.Sulphoaluminate cement. Beijing University of Technology Press, Beijing, China; 1999.
18.
GartnerEM, MacpheeDE.A physico-chemical basis for novel cementitious binders. Cem Concr Res. 2011;41:736–749. DOI:10.1016/j.cemconres.2011.03.006.
19.
MaJ, YuZ, NiC, Effects of limestone powder on the hydration and microstructure development of calcium sulphoaluminate cement under long-term curing. Constr Build Mater. 2019;199:688–695. DOI:10.1016/j.conbuildmat.2018.12.054.
20.
HargisCW, KirchheimAP, MonteiroPJM, Early age hydration of calcium sulfoaluminate (synthetic ye'elimite) in the presence of gypsum and varying amounts of calcium hydroxide. Cem Concr Res. 2013;48:105–115. DOI:10.1016/j.cemconres.2013.03.001.
21.
PelletierL, WinnefeldF, LothenbachB.The ternary system Portland cement–calcium sulphoaluminate clinker–anhydrite: hydration mechanism and mortar properties. Cem Concr Compos. 2010;32:497–507. DOI:10.1016/j.cemconcomp.2010.03.010.
22.
Gallardo-HerediaM, Almanza-RoblesJM, Magallanes-RiveraRX, Calcium sulfoaluminate cement pastes from industrial wastes: effect of hemihydrate content. Mater Struct. 2017;50:93–103. DOI:10.1617/s11527-016-0960-z.
23.
ASTM, International. ASTM C-204, fineness of hydraulic cement by air permeability apparatus. West Conshohocken (PA): ASTM; 2017.
24.
ONNCCE. (2002). NMX-C-085-ONNCCE-2002, Construction industry – Hydraulic cements – Standard test method for mechanical mixing of hydraulic cement pastes and mortars. In Spanish. México, D.F.
25.
WernerKC, ChenY, OdlerI.Investigations on stress corrosion of hardened cement pastes. Cem Concr Res. 2000;30:1443–1451. DOI:10.1016/S0008-8846(00)00328-8.
26.
BernardoG, TelescaA, ValentiGL.A porosimetric study of calcium sulfoaluminate cement pastes cured at early ages. Cem Concr Res. 2006;36:1042–1047. DOI:10.1016/j.cemconres.2006.02.014.
27.
ASTM, International. ASTM c 150, standard specification for Portland cement. West Conshohocken (PA): ASTM; 2004.
28.
ONNCCE. (2004). NMX-C-414-ONNCCE-2004, Construction industry – Hydraulic cements – Specifications and testing methods. In Spanish. México. D. F.
29.
GallucciE, ZhangX, ScrivenerKL.Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H). Cem Concr Res. 2013;53:185–195. DOI:10.1016/j.cemconres.2013.06.008.
