Based on crosslinking of polymers with different vinyl contents at low temperature and pyrolysis of the polymer at high temperature, joining temperature and impregnation cycles of an SiC joint were discussed. Polyvinylphenylsiloxane as the polymer with active groups of Si–OH and CH=CH2 by crosslinking enhances ceramic yield and thermal stability. The microstructure of the polymer changes from amorphous ceramic into grains of SiO2 and SiC, grains can dispersion strengthening enhances strength of joint layer. Shear strength of SiC joints reaches the maximum at 1200°C. A relatively good interface between the SiC substrate and pyrolysis product of the polymer is formed, but there exist loose cracks or voids in the joint layer which affect the shear strength of the joint. The shear strength of the SiC joint reaches 69.2 MPa through seven times of vacuum impregnation/pyrolysis enhancement. According to the microstructure and properties of the SiC joint, the pyrolysis mechanism of the joining layer as part of the joint by using polyvinylphenylsiloxane is explained.
ColomboP, SglavoV, PippelE, Joining of reaction-bonded silicon carbide using a preceramic polymer. J Mater Sci. 1998;33:2405–2412. doi: 10.1023/A:1004312109836
2.
ColomboP, RiccardiB, DonatoA, Joining of SiC/SiCf ceramic matrix composites for fusion reactor blanket applications. J Nucl Mater. 2000;278:127–135. doi: 10.1016/S0022-3115(99)00268-8
3.
LiuY, HuangZR, LiuXJ.Joining of sintered silicon carbide using ternary Ag–Cu–Ti active brazing alloy. Ceram Int. 2009;35:3479–3484. doi: 10.1016/j.ceramint.2009.03.016
4.
DaiXY, CaoJ, ChenZ, Brazing SiC ceramic using novel B4C reinforced Ag–Cu–Ti composite filler. Ceram Int. 2016;42:6319–6328. doi: 10.1016/j.ceramint.2016.01.021
5.
JungY-I, KimSH, KimHG, Microstructures of diffusion bonded SiC ceramics using Ti and Mo interlayers. J Nucl Mater. 2013;441:510–513. doi: 10.1016/j.jnucmat.2013.07.008
6.
KimJH, KimDS, LimST, Interfacial microstructure of diffusion-bonded SiC and Re with Ti interlayer. J Alloys Compd. 2017;701:316–320. doi: 10.1016/j.jallcom.2017.01.081
7.
DongH, LiS, TengY, Joining of SiC ceramic-based materials with ternary carbide Ti3SiC2. Mater Sci Eng: B. 2011;176:60–64. doi: 10.1016/j.mseb.2010.09.002
8.
RajeshN, HynesJ, VelubPS, Investigate the influence of bonding temperature in transient liquid phase bonding of SiC and copper. Ceram Int. 2017;43:7762–7767. doi: 10.1016/j.ceramint.2017.03.084
9.
LangF, YamaguchiH, NakagawaH, Thermally stable bonding of SiC devices with ceramic substrates: transient liquid phase sintering using Cu/Sn powders. J Electrochem Soc. 2013;160:D315–D319. doi: 10.1149/2.114308jes
10.
TianW, KitaH, HyugaH, Reaction joining of SiC ceramics using TiB2-based composites. J Eur Ceram Soc. 2010;30:3203–3208. doi: 10.1016/j.jeurceramsoc.2010.07.017
11.
LiSJ, DuanHP, LiuS, Interdiffusion involved in SHS welding of SiC ceramic to itself and to Ni-based superalloy. Int J Refract Met Hard Mater. 2000;18:33–37. doi: 10.1016/S0263-4368(00)00008-1
12.
KoyanagT, KatohY, KiggansJO, Irradiation resistance of silicon carbide joint at light water reactor-relevant temperature. J Nucl Mater. 2017;488:150–159. doi: 10.1016/j.jnucmat.2017.03.017
13.
HenagerCH, NguyenBN, KurtzRJ, Modeling and testing miniature torsion specimens for SiC joining development studies for fusion. J Nucl Mater. 2015;466:253–268. doi: 10.1016/j.jnucmat.2015.07.044
14.
XuHB, ZhouBF, LuoQX, The microstructure and properties of joint interface of semisolid stirring brazing of composites. J Mater Sci Tec. 2012;28:1163–1168. doi: 10.1016/S1005-0302(12)60187-X
15.
ChenXG, XieRS, LaiZW, Interfacial structure and formation mechanism of ultrasonic-assisted brazed joint of SiC ceramics with Al-12Si filler metals in Air. J Mater Sci Tec. 2017;33:492–498. doi: 10.1016/j.jmst.2016.03.016
16.
ColomboP.Joining ceramics using preceramic polymers. In: Bellosi A, Kosmact T, Tomsia AP, editors. Interfacial science in ceramic joining. NATO ASI Series 3. Hightechnology, vol 58. Dordrecht: Kluwer Academic; 1998; p. 405–413.
ZhongH, WangZ, ZhouHJ, Properties and microstructure evolution of Cf/SiC composites fabricated by polymer impregnation and pyrolysis (PIP) with liquidpolycarbosilane. Ceram Int. 2017;43:7387–7392. doi: 10.1016/j.ceramint.2017.02.100
19.
LiuJ, QiaoYL, ZhangP, Synthesis of SiC ceramics from polysilazane by laser pyrolysis. Surf Coat Technol. 2017;321:491–495. doi: 10.1016/j.surfcoat.2017.05.021
LiuHL, LiSJ, ChenZJ.Joining of reaction-bonded silicon carbide using a polysiloxane. Rare Metal Mat Eng. 2006;35:134–135.
23.
RobertHD, ProchazkaS, DoremusRH.Silicon oxycarbide glasses: Part II. Structures and properties. J Mat Res. 1991;6:2723–2734. doi: 10.1557/JMR.1991.2723
24.
XiongHP, ChenB, KangYS, Wettability of Co–V, and PdNi–Cr–V system alloys on SiC ceramic and interfacial reactions. Scripta Mater. 2007;56:173–176. doi: 10.1016/j.scriptamat.2006.08.067
25.
WeiQ, PippelE, WoltersdorfJ, Interfacial SiC formation in polysiloxane-derived Si–O–C ceramics. Mater Chem Phys. 2002;73:281–289. doi: 10.1016/S0254-0584(01)00395-9
26.
WangC, WangJ, ParkCB, Cross-linking behavior of a polysiloxane in preceramic foam processing. J Mater Sci. 2004;39:4913–4915. doi: 10.1023/B:JMSC.0000035335.92101.7c
27.
KleebeHJ, TurquatC, SorarùDG.Phase separation in a Si CO glass studied by transmission electron microscopy and electron energy-loss spectroscopy. J Am Ceram Soc. 2001;84(5):1073–1080. doi: 10.1111/j.1151-2916.2001.tb00792.x
28.
HurwitzFI, HeimannP, FarmerSC, Characterization of the pyrolytic conversion of polysilsesquioxanes to silicon oxycarbides. J Mater Sci. 1993;28(24):6622–6630. doi: 10.1007/BF00356406
29.
FoxJR, WhiteDA, OleoffSM, Pyrolysis of organosilicon gels to silicon carbide. Mater Res Soc Symp Proc. 1986;73:395–400. doi: 10.1557/PROC-73-395
