Rotary kilns are used extensively in the cement industry to convert raw meal into cement clinker. In order to optimise the operation of cement kilns, computationally efficient thermal models are required. In this work, the development of a one-dimensional thermal model for kilns is explored. To simplify the model, the kiln is assumed to be well mixed in the transverse direction. A simultaneous mass and energy balance is solved based on a steady-state approximation. Existing semi-empirical models for heat transfer in the kiln are implemented and critically evaluated. The resulting one-dimensional model is capable of predicting axial temperature profiles in the rotary kiln which agree well with the available experimental data found in the literature. The model presented here extends from previous published models by considering a full enthalpy balance for the gas in the kiln. This allows the model to be used in a fully predictive manner, taking into account the temperature-dependent thermodynamic, transport, and radiative properties of the gas phase.
MadloolNA, SaidurR, HossainMS, A critical review on energy use and savings in the cement industries. Renew Sust Energ Rev. 2010;15(4):2042–2060. doi: 10.1016/j.rser.2011.01.005
2.
HaneinT, ImbabiMS, GlasserFP, Lowering the carbon footprint and energy consumption of cement production: A novel Calcium SulfoAluminate cement production process. Proceedings of the 1st International Conference on Grand Challenges in Construction Materials; 2016 Mar 17–18; Los Angeles, CA: University of California.
LiS-Q, MaL-B, WanW, A mathematical model of heat transfer in a rotary kiln thermo-reactor. Chem Eng Technol. 2005;28(12):1480–1489. doi: 10.1002/ceat.200500241
5.
MujumdarKS, RanadeVV. Simulation of rotary cement kilns using a one dimensional model. Chem Eng Res Des. 2006;84(3):165–177. doi: 10.1205/cherd.04193
6.
Romero ValleMA. Numerical modelling of granular beds in rotary kilns [MSc thesis]. Delft, Netherlands: Delft University of Technology; 2012.
7.
KoukkariP. Advanced Gibbs Energy Methods for Functional Materials and Processes. Research Notes 2506, VTT Technical Research Centre of Finland, Vuorimiehentie, Finland, 2009.
8.
BarrPV. Heat transfer processes in rotary kilns [PhD thesis]. British Columbia, Canada: The University of British Columbia; 1986.
9.
TschengSH. Convective heat transfer in a rotary kiln [PhD thesis]. British Columbia, Canada: The University of British Columbia, 1978.
10.
McBrideBJ, ZeheMJ and GordonS. NASA Glenn coefficients for calculating thermodynamic properties of individual species. National Aeronautics and Space Administration, John H. Glenn Research Center at Lewis Field, Cleveland, Ohio, USA, 2002.
11.
HaasJLJr, RobinsonGRJr, HemingwayBS. Thermodynamic tabulations for selected phases in the system CaO–Al2O3–SiO2–H2 at 101.325 kPa (1 atm) between 273.15 and 1800K. J Phys Chem Ref Data. 1981;10(3):575–670. doi: 10.1063/1.555645
12.
MastorakosE, MassiasA, TsakiroglouCD, CFD predictions for cement kilns including flame modelling, heat transfer and clinker chemistry. Appl Math Model. 1999;23(1):55–76. doi: 10.1016/S0307-904X(98)10053-7
13.
BrimacombeJK, WatkinsonAP. Heat transfer in a direct-fired rotary kiln: I. Pilot plant and experimentation. Metall Trans B. 1978;9(2):201–208. doi: 10.1007/BF02653685
14.
BarrPV, BrimacombeJK, WatkinsonAP. A heat- transfer model for the rotary kiln: Part II. Development of the cross section model. Metall Trans B. 1989;20(3):403–419. doi: 10.1007/BF02696992
15.
AnderssonC.Assimulo: a new Python based class for simulation of complex hybrid DAEs and its integration in JModelica.org [MSc thesis]. Lund, Sweden: Lund University; 2011.
16.
WachtersLHJ, KramersH. The calcining of sodium bicarbonate in a rotary kiln. Proc. 3rd. Eur. Sym. Chem. React. Eng.; 1964; 77.
17.
WesGWJ, DrinkenburgAA, StemerdingS. Heat transfer in a horizontal rotary drum reactor. Powder Technol. 1976;13(2):185–192. doi: 10.1016/0032-5910(76)85003-6
18.
LehmbergJM, HehlM, SchügerlK. Transverse mixing and heat transfer in horizontal rotary drum reactors. Powder Technol. 1977;18(2):149–163. doi: 10.1016/0032-5910(77)80004-1
19.
SchluenderEU. Heat transfer to packed and stirred beds from the surface of immersed bodies. Chem Eng Process. 1984;18(1):31–53. doi: 10.1016/0255-2701(84)85007-2
20.
BarrPV, BrimacombeJK, WatkinsonAP. A heat-transfer model for the rotary kiln: Part I. pilot kiln trials. Metall Trans B. 1989;20(3):391–402. doi: 10.1007/BF02696991
21.
SvehlaRA. Transport coefficients for the NASA Lewis chemical equilibrium program. Vol. 4647, 1995, USA, National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program.
22.
HarrisCM. Dictionary of architecture and construction. New York: McGraw-Hill Professional; 2005.
23.
PowellRW, HoCY, LileyPE. Thermal conductivity of selected materials. No. NSRDS-NBS-8.Washington (DC): National Bureau of Standards; 1966.
24.
YoonY-G, CarR, ScrolovitzDJ, Thermal conductivity of crystalline quartz from classical simulations. Phys Rev B. 2004;70(1):012302. doi: 10.1103/PhysRevB.70.012302
25.
HottelHC, SarofimAF. Radiative transfer. New York: McGraw-Hill; 1967.
26.
GreenDW, PerryRH. Perry's chemical engineers’ handbook. 8th ed. New York: McGraw-Hill; 2008.
27.
GorogJP, BrimacombeJK, AdamsTN. Radiative heat transfer in rotary kilns. Metall Trans B. 1981;12(1):55–70. doi: 10.1007/BF02674758
28.
PerayKE, WaddellJJ. The rotary cement kiln. London: Chemical Publishing Company; 1986.
29.
HolmanJP. Heat transfer. 10th ed. Boston (MA): McGraw-Hill; 2010.
30.
HaneinT, GalanI, ElhowerisA, Production of belite calcium sulfoaluminate cement using sulfur as a fuel and as a source of clinker sulfur trioxide: pilot kiln trial. Adv Cem Res. 2016;28(10):643–653. doi: 10.1680/jadcr.16.00018
31.
HaneinT, GlasserFP, BannermanMN. Thermodynamics of Portland cement clinkering. Proc. 14th. Int. Cong. Chem. Cement; 2015; Beijing, China.
