Computational modelling and experimental validation of the thermal fusion bonding process in porous fibrous media

Abstract

This article presents a computational model of the thermal bonding of nonwovens using convective hot air and its experimental validation. A computational fluid dynamics model based on the continuum modelling approach and the theory of porous media is developed to treat the flow behaviour and heat transfer within the thermal bonding system. The model includes several components of a typical industrial machine including the conveyer belt, drum cover, drum, and the nonwoven web. Experimental measurements are used to supply appropriate boundary conditions for the simulations and to provide data for the validation of the numerically computed results. The model is concluded to be an accurate computational tool that could potentially replace the costly experiments and be employed in product development, process optimization, and machine design.

Keywords

nonwoven thermal bonding heat transfer porous media process modelling

Get full access to this article

View all access options for this article.

References

Butler

The nonwoven fabrics handbook, 1999, Cary, North Carolina, Association of the Nonwoven Fabrics Industry (INDA).

Hossain

Acar

Malalasekera

A mathematical model for transverse airflow and heat transfer through fibrous webs. Proc. IMechE, Part E: J. Process Mechanical Engineering, 2005, 219, 357–366, DOI: 10.1243/095440805X33199.

Forchheimer

Wasserbewegung durch Boden. Z. Ver. Deutsch. Ing., 1901, 45, 1782–1782.

Ergun

Fluid flow through packed columns. Chem. Eng. Prog., 1952, 48289–94.

De Boer

Theory of porous media: highlights in the historical development and current state, 2000, New York, Berlin, Heidelberg, Springer-Verlag.

Luo

S. Y.

Mitra

Finite elastic behavior of flexible fabric composite under biaxial loading. J. Appl. Mech., 1999, 66, 631–638.

Wirtz

R. A.

In-plane effective thermal conductivity of plain-weave screen laminates. IEEE Trans. Compon. Packag. Technol., 2002, 254615–619.

Wirtz

R. A.

In-plane effective thermal conductivity of symmetric, diamond-weave screen laminates. J. Electron. Packag., 2005, 127, 353–356.

McGregor

The effect of rate of flow on rate of dyeing. Part II: the mechanism of fluid flow through textiles and its significance in dyeing. J. Soc. Dyers Colourists, 1965, 81, 429–438.